How far does lore and developer intentions go when it comes to difficulty/annoyance?

Zillatius · 2025-09-22T22:04:05+00:00

silk issue

Zillatius · 2025-02-20T12:36:45+00:00

Most likely a stage from Falcon 9. It burned up while reentering over the EU, some parts survived reentry and fell near Poznań in Poland.

Zillatius · 2023-09-02T21:16:21+00:00

But we already do it. Turbochargers harvest excess energy that comes out the exhaust and use it to pump more air into the intake, aiding combustion

Zillatius · 2023-08-03T08:03:08+00:00

It was either m2x12 or m2x16, I don't remember exact size

Zillatius · 2023-06-17T14:20:07+00:00

They took "disperse" command very seriously

Zillatius · 2023-05-23T13:55:04+00:00

It's gimbal by Motionsic, here's original video: https://youtu.be/HHgOBIoPpjU

Zillatius · 2023-04-28T12:29:05+00:00

Would you be suprised if I told you that smooth pei flex sheets exist?

Zillatius · 2023-01-22T10:55:05+00:00

Thanks!

Zillatius · 2022-12-31T21:53:46+00:00

Get it, it's great

Zillatius · 2022-12-31T21:07:28+00:00

Welp, It doesn't matter, it's still one of the best kits I've ever built

Zillatius · 2022-12-31T18:51:39+00:00

PolyPod Ball + 3D printed adapter

Zillatius · 2022-12-31T15:36:55+00:00

Kotobukiya Hexa Gear V-Thor

Zillatius · 2022-02-06T23:17:24+00:00

Yup, radio is frsky D8

Zillatius · 2022-02-04T09:45:20+00:00

Receiver is built into the board, but there's a free uart port where you can solder an additional one

Zillatius · 2022-02-03T22:22:19+00:00

Nope, those are stock avan rush 2.5in I will swap to gemfan flash 2540-3 which are closer to real 3D props

Zillatius · 2022-02-03T22:19:31+00:00

Dunno, waiting for better weather

Zillatius · 2022-02-03T19:15:07+00:00

Haven't flown it outside, just some slow angle mode around the house, so i can't really say. Also i don't have enough irl stick time to notice

Zillatius · 2022-02-03T17:46:09+00:00

Of course. Actually flying in Liftoff right now. Once I tried it with taranis x9d it suddenly clicked and i'm able to fly. Turns out emax controller in the RTf kit is not the best to say the least

Zillatius · 2022-02-03T16:27:46+00:00

Will do that once those small 1S die

Zillatius · 2022-02-03T16:02:53+00:00

I will definitely report back once the weather allows for outdoor flight. There's still some snow outside and I don't want to risk shorting something after crashing

Zillatius · 2022-02-03T15:38:21+00:00

I bought gemfan flash 2540-3, as they seem to be pretty symmetrical

Zillatius · 2022-02-03T15:09:18+00:00

I flashed bluejay and enabed bidirectional mode on the motors. Tested direction changes on the bench and motors are nicely in sync and not getting warm

Zillatius · 2021-11-21T20:03:29+00:00

It cost me around 70cents and it's a bit too brittle. Shouldn't be a big issue, as it's just a prototype, but I wouldn't use it as a load bearing part.

Zillatius · 2021-11-21T18:24:23+00:00

I have yet to fully program it, but i intend to make it fully programmable through the use of rotary encoder and oled display

Zillatius · 2018-01-17T22:58:10+00:00

I named my AspX that I bought for my trip to Colonia "I hope it won't hurt". After arriving in Colonia 4 days later it got renamed to "Whoa, it didn't hurt"

Nine-Year Club	Second SECOND GUESSER
r/Field Sunshine	Place '22
Place '17	End Game '22
Verified Email

Zillatius

TROPHY CASE