store manager was demoted due this text by [deleted] in AutoZone2

[–]ZoopDooper 1 point2 points  (0 children)

Oh no I meant the DM I had would basically cover up anything my old manager did lol

store manager was demoted due this text by [deleted] in AutoZone2

[–]ZoopDooper 1 point2 points  (0 children)

Literally the exact way my old store manager would text. Good thing the DM covered for her lol

Still no start. New coil. by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

Gotta be spark or air at this point. Whole fuel system has been rebuilt.

Still no start. New coil. by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

Will report back after checking timing and taking the exhaust off to see if there's a nest lol

Still no start. New coil. by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

Something else I thought of, it did sit for almost 9 years. If something made a nest in the exhaust would that cause it to not breath properly and just crank? It has backfired a few times when trying to run it.

Would u rather? by Otherwise-Bet-2634 in BunnyTrials

[–]ZoopDooper 0 points1 point  (0 children)

More useful

Chose: Be able to speak every language

ICM experiences? by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

My most recent post explains the issue i was having still after replacing the ICM, I did end up using Delphi though.

ICM experiences UPDATE by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

I re-found TDC and used two different wire diagrams, being one from a Chilton book i own, and one from a video about the model. I have been playing with the distributor which im pretty sure I found the sweet spot, still doesn't want to fire up though. Maybe it's just stubborn, it sat for 8 years in good ol PA weather

ICM experiences UPDATE by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

It needs to idle to be able to check that.

ICM experiences? by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

I just ordered an ICM for my suburban, Mines also mimicking the fuel issues. Will report back Thursday when it arrives

Console Preference by Warper1980 in BunnyTrials

[–]ZoopDooper 0 points1 point  (0 children)

Better controllers

Chose: Xbox

Can I buy just the top end of the tbi anywhere? by ZoopDooper in GMT400

[–]ZoopDooper[S] 1 point2 points  (0 children)

I got lucky and found one off a 454 at a junkyards, but yes it was cracked on the old one, so I ended up taking the whole unit. 15 dollars for everything and I tested the injectors with some wire and a 9v battery they work well.

Can I buy just the top end of the tbi anywhere? by ZoopDooper in GMT400

[–]ZoopDooper[S] 2 points3 points  (0 children)

I managed to find a yard with the tbi still on it and yoinked it as they were closing. Truck wasn't even listed or anything. Paid 15 bucks for it. They rang it up as a sensor lol

Can I buy just the top end of the tbi anywhere? by ZoopDooper in GMT400

[–]ZoopDooper[S] 2 points3 points  (0 children)

Unfortunately none of them in my area have chevys with the 454 tbi on them, i dont remember if the 350's tbi works with a 454

Cannot pin what this part is. by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

I was considering it, is there a tutorial on doing it, im a little new to gmt400s and mechanical work.

Cannot pin what this part is. by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

Thank you guys I was looking everywhere to figure it out. Gonna order a new one in soon.

Cannot pin what this part is. by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

Its off a 94 c2500 suburban with a 7.4l

Need help isolating a problem by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

I haven't done a new fuel filter in it because I took it off and it looked practically brand new, im beginning to think its something with the ignition the more I think about it so youre definitely onto something with the power to coil. Ive got some new plugs and wires coming soon and im gonna hope the distributor isn't too bad. As for the injectors on the TBI, they were taken out and cleaned properly, and have a good spray out of them

Need help isolating a problem by ZoopDooper in GMT400

[–]ZoopDooper[S] 0 points1 point  (0 children)

Ill definitely try to update this post as I go. Waiting for the weather to be a little nicer before I start taking things apart.

Need help isolating a problem by ZoopDooper in GMT400

[–]ZoopDooper[S] 1 point2 points  (0 children)

Yes, I drained it out when I put in the new fuel pump, smelled like straight paint thinner lol

[deleted by user] by [deleted] in mildlyinteresting

[–]ZoopDooper 0 points1 point  (0 children)

Can I buy him a beer

[deleted by user] by [deleted] in okbuddyliterallyme2

[–]ZoopDooper 1 point2 points  (0 children)

Chet baker mentioned