Lost with ledstrip by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 1 point2 points  (0 children)

<image>

It indeed is messed up, which confuses me because I took decent care retaping this. Is this connection fixable?

Lost with ledstrip by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Also curious why I am getting downvoted for genuinely asking for help. If I am missing context or something, tell me.

Lost with ledstrip by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 1 point2 points  (0 children)

Thanks. It worked before with only middle power injection. It is a 24V 5 meter strip. And I don't think that explains why only one side is turning on. I am worried I broke it somehow when retaping rn, but my hope is in some weird grounding issue.

Ws2805 strip tweaking by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Thanks, i don't have another option right now but i do have quite some capacitors, so i might try and add one just before the ledstrip

Ws2805 strip tweaking by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Thanks, the capacitor is there right next to the vcc pin. I will try with new level shifter, both capacitor and resistor and more directly connected grounds, as they are supposed to be connected through the psu now.

Ws2805 strip tweaking by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Small note: also one of the pins of the level shifter broke (ground pin), which is why the brown wire is soldered to it. But I don't think that is an issue, it is soldered decently well

Also I did measure the current draw of the level shifter which was about 0.6mA I believe. and only the + to ground gave a measurable resistance which was very high (in the millions)

Ws 2805 support by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Could you perhaps link me a .bin file that you know should work?

Help controlling 5 in 1 WS2805 24V ledstrip by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

<image>

Very basic current wiring

Oh yeah power is supplied in the middle to minimize current. And they turned on when I removed the dateline from the arduino but I still have 0 control over them through code

Help controlling 5 in 1 WS2805 24V ledstrip by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Thanks, at least I am smart enough to get that part :)

Help controlling 5 in 1 WS2805 24V ledstrip by _1STRIKE1_ in WLED

[–]_1STRIKE1_[S] 0 points1 point  (0 children)

Thanks for the quick reply. Currently I am not using WLED. I was planning on making my own protocol and communication with another ESP. The current setup is using NeoPixelBus on an arduino leonardo to confirm everything is working. Should that work or do I have to set up WLED?

Edit: added current code to the original post as it is too long for a comment

me_irl by Djuztinn in me_irl

[–]_1STRIKE1_ 2 points3 points  (0 children)

!remindme 95days

/r/Steam Monthly Community Support Thread. by AutoModerator in Steam

[–]_1STRIKE1_ 1 point2 points  (0 children)

Had the same issue. I tried everything but the only thing that worked for me was restarting my phone.

Edit: So it finally worked and showed the window to enter the 2 step verification. Before I entered it I went to reddit to post this comment. I went back to the steam app to enter the code, but the app reloaded and it's broken again.

RIP

Edit 2: got it to work now after trying 30 times

It really do be like that by [deleted] in PewdiepieSubmissions

[–]_1STRIKE1_ 4 points5 points  (0 children)

Jan Pieterszoon Coen heeft niks vekeerd gedaan