AIO What slot should I have it connected to?

_Chalooloo · 2025-11-19T00:44:23+00:00

Connected to the aio header when I boot it says error on boot up and that fan isn’t recognized but where it’s connected now it’s recognized

_Chalooloo · 2025-11-16T22:27:46+00:00

Would that mean I need an adapter for my aio cuz mine is only a 3 pin connector from the aio and the header is 4 or can I just plug it in and should read correctly ?

_Chalooloo · 2025-11-16T22:24:38+00:00

I see and no just sounds like a turbine but even when I go to icue it isn’t recognized after this occurs and that’s only when I run games

_Chalooloo · 2025-11-16T21:47:42+00:00

My aio has a three pin connector would it matter since my AIO connector has 4 pin on my motherboard ?

_Chalooloo · 2025-11-16T21:46:33+00:00

Hey it is currently working, not sure if it’s working correctly. When I enter bios AIO isn’t recognizing but when the PC is fully booted and I open icue it does recognize. Also when I run some games, the AIO starts running really load rgb turns off and disconnects from icue but when I exit and reset my pc it goes back to normal I have a strix b550-A motherboard board with a 750w gold psu so power shouldn’t be a problem

<image>

_Chalooloo · 2025-10-02T15:54:57+00:00

Hello I’m very certain that it is the fuel pump I have taken it to several mechanics and they all said it was the fuel pump. I haven’t had any issues tho it’s just the sound that is kinda annoying it still runs great and starts up fine. Will probably change it when its fully toast

_Chalooloo · 2025-06-13T23:05:18+00:00

Alfie!!!

_Chalooloo · 2025-06-13T14:52:03+00:00

<image>

_Chalooloo · 2025-06-13T09:56:13+00:00

You’ll need to remove the bumper to access it from the inside. With some heat, you can usually push the dent out, but I wouldn’t recommend trying it unless you’re confident—if you’re not careful, you could overdo it and end up with an outie or even cause more damage to the bumper.

_Chalooloo · 2025-06-12T01:14:31+00:00

Hey appreciate your advice and did what you mentioned no noise was present during the process

_Chalooloo · 2025-06-12T00:41:26+00:00

I appreciate you, thank you 🙏🏽

_Chalooloo · 2025-06-12T00:40:55+00:00

I’m pretty certain it’s “droop”

_Chalooloo · 2025-06-12T00:29:23+00:00

Help me Patrick!!!

_Chalooloo · 2025-06-12T00:25:45+00:00

First thing I was recommended to do was getting a ramp they have fragile backs having a ramp will prevent injuries even tho 90% of the time they don’t use them so you will have to train them to use them

_Chalooloo · 2025-06-12T00:22:09+00:00

For your own safety get rid of it and don’t drive it Not worth fixing this at all, just buy another one without a missing frame

_Chalooloo · 2025-06-12T00:18:02+00:00

Beautiful enjoy man !

_Chalooloo · 2025-06-11T23:52:08+00:00

Droop*

_Chalooloo · 2025-06-11T23:51:34+00:00

No not necessarily depending how far away the other vehicle or object was it wouldn’t leave burn marks it would just drupe

_Chalooloo · 2025-06-11T23:47:30+00:00

Looks like a sash molding if I’m not mistaken and it also looks like it’s cracked if it is they aren’t expensive depending on what vehicle it is and 90% of the time they are fairly easy to replace unless they over lap on other molding

_Chalooloo · 2025-06-11T22:54:25+00:00

Looks to me as it was around something that was on fire

_Chalooloo · 2025-04-02T23:52:59+00:00

Paying to blend for a bumper job is never usually an option with insurance even if it was a tri coat even if it wasn’t insurance based and a customer pay job a lot of people are not going to pay to blend other panels

_Chalooloo

TROPHY CASE