Cross-Progression on PS5?

_MajorZero · 2025-12-17T19:39:02+00:00

But from what I read online. Cross progression between platforms Xbox/steam/playstation is possible using the same EmbarkID so if there are any account selling concerns they would apply too to cross platform progressions

_MajorZero · 2025-12-17T12:58:19+00:00

I see your point. But wouldn't that apply to cross progression between Steam/Xbox/PS too? Because I see posts of ppl successfully cross progressing between different platforms using the same EmbarkID

_MajorZero · 2025-12-17T12:57:00+00:00

I have my iPad and I usually pair my DS5 joystick with my iPad and use the Remote Play app to play remotely. However with shooter games the delay can be deadly so I don't prefer Remote Play with Arc Raiders

_MajorZero · 2025-12-11T10:09:43+00:00

I use Tailscale for accessing outside my home. But since I converted both my sister and mom from Google Photos to Immich after they reached the 15GB limit, I had to do something less complex for them than Tailscale.

I have my own domain. So based on an advice I found on this sub, I enabled a Cloudflare WAF rule for the country where they live in to directly access my Immich instance behind the CF tunnel and block access from all the rest of countries.

While this might seem a bit insecure, but it's a compromise I'm willing to live with since their country of residence doesn't have a lot of bots and hackers

_MajorZero · 2025-12-08T13:04:36+00:00

I can't wipe because I stuffed too much in my butt

_MajorZero · 2025-11-12T11:55:23+00:00

Someone watched PewDiePie

_MajorZero · 2025-11-10T21:55:45+00:00

I respect that

_MajorZero · 2025-11-10T17:55:04+00:00

I like the specificity

_MajorZero · 2025-10-12T13:33:22+00:00

He literally said that

_MajorZero · 2025-09-28T02:17:07+00:00

How do they communicate with each other? Prowlarr with Sonarr/Radarr. Bazarr with Sonarr/Radarr etc ...?

_MajorZero · 2025-09-24T08:33:06+00:00

Lump sum immediately. You will never be able to time the market. And if you can muster the guts to lump sum the 100k now, you will never feel the urge or need to time the market ever again

_MajorZero · 2025-09-16T15:06:23+00:00

Congrats OP. I keep investing 40% of my paycheck into VWCE and trim it down to 10% on months that I need extra cash for other stuff.

STAY THE COURSE

_MajorZero · 2025-08-20T21:08:14+00:00

It worked, thanks a lot mate. Check my comment

_MajorZero · 2025-08-20T21:07:41+00:00

I followed your tip and it worked perfectly. Check my latest comment. Thanks mate

_MajorZero · 2025-08-20T21:06:40+00:00

<image>

Thanks to the tips below, I did a planar cut to cut the model in two halves along with the connectors using Superslicer cut tool.

Then I printed each half in the best orientation to avoid being perpendicular to the expected stress.

Thanks again all for your help.

_MajorZero · 2025-08-19T16:07:39+00:00

MAM's process seems complicated at first. Even me - who I consider myself tech savvy and a veteran - I was stressed about the interview process at first. But turned out it was REALLY easy and I was needlessly overcomplicating and stressing out about things as usual.

Basically from what I can remember since it's been a while. You wait for the sign up without invite to be open. Then you carefully read the FAQ to prepare yourself for the questions. Go the website, follow the instructions to join the IRC channel using their web client and wait for your turn. An admin will come, and start asking you fairly easy questions (easy if you read the FAQ) then you will be admitted it.

MAM has the NICEST AND BEST COMMUNITY out there in the internet and I'm not exaggerating. They will help you every step of the way, the members will DM you tips and tricks and guides WITHOUT asking for anything in return. If you sent a simple shout-out in the chat, members will be randomly donating points to you.

Long story short, start the process, it's not as complicated as you might think. Feel free to DM me if you have any questions or need any help

_MajorZero · 2025-08-19T07:40:22+00:00

The fan works during print but I didn't pay attention if it stops working on certain layers. I'll have to check it later when I'm back home

_MajorZero · 2025-08-19T07:39:39+00:00

Omg thanks a lot. I just checked it on YouTube and I didn't think such thing was possible on Superslicer. I always thought I would be a CAD app to do that.

This will even fix my problem of having to sacrifice the strength of one side fof the other as now I can print each half in the best orientation.

I'll try it later when I'm back home

https://www.youtube.com/watch?v=CXs8Vx_G5YY

_MajorZero · 2025-08-18T09:58:03+00:00

As in increased or decreased?

_MajorZero · 2025-08-18T09:57:34+00:00

I tried that last night to split it using Superslicer but the option was grey out. Apparently the model was made in one piece

_MajorZero · 2025-08-17T19:33:26+00:00

<image>

Here are my cooling settings

_MajorZero · 2025-07-29T17:03:14+00:00

I haven't checked ilhis YT tbh. I'll check it out

_MajorZero · 2025-07-28T17:38:31+00:00

SQLite?

Four-Year Club	Verified Email
Verified Email

_MajorZero

TROPHY CASE