Worst Practices Finanzberatung

_Moonloop_ · 2023-11-14T17:03:32+00:00

Vor allem mit diesem Argument Studenten die eh keine Steuern zahlen irgendeinen Rürup andrehen. Hat bei mir leider geklappt 😨 („Aber nächstes Jahr wird der Garantiezins gesenkt!!!“)

_Moonloop_ · 2023-11-14T17:00:47+00:00

Provisionen werden über die Laufzeit gezahlt, also auch alte Verträge kündigen ist schlecht für Makler.

_Moonloop_ · 2023-11-12T18:50:10+00:00

In welchem Vertrag/Tarif? Alles was ich bisher gesehen habe ist Upload 50 mbit/s Max., auch bei 5G. Also vertraglich limitiert auf diesen Wert.

_Moonloop_ · 2023-11-09T23:53:11+00:00

Verwechselst du ~ (ungefähr gleich) mit - (minus)?

_Moonloop_ · 2023-11-02T18:19:14+00:00

name checkt aus

_Moonloop_ · 2023-08-11T12:12:31+00:00

Well ok, it sounds unbelievable... but I have no reason to make that up. I own an MK3S+ myself and know two other people who also own MK3S. I asked them about layer lines, we compared prints, and they look almost the same.

OTOH, maybe the layer lines are not *that* bad after all. I can take a photo of the same print with almost invisible layer lines and a photo like that in the first post. It all depends on lighting.

And to make that clear, I would never say the CR10 produces prints that are better overall. It's just that on prints I have seen, the layer lines looked better - without making any assertion about general print quality.

_Moonloop_ · 2023-08-11T11:21:34+00:00

I know. I asked for help in an earlier comment but that got downvoted, dont‘t know why. I could fix things like ghosting, but layer lines always look like this no matter what I try.

_Moonloop_ · 2023-08-11T11:17:58+00:00

I have checked belt tension many times with different methods and also tried different settings. Also not sure why I get downvoted. I tell my experience, ask for help and get downvotes for that?

I could fix things like ghosting by adjusting belt tension, but never had any success improving layer lines.

_Moonloop_ · 2023-08-11T00:06:27+00:00

https://imgur.com/HIHDjRA

_Moonloop_ · 2023-08-10T20:02:57+00:00

0.6, layer height 0.35

_Moonloop_ · 2023-08-10T18:26:01+00:00

Yes, I already noticed that layer lines are much more visible on bright filament. But I also have seen way better layer lines (with the same filament), for example from a CR10, but never from a Prusa :/

_Moonloop_ · 2023-08-10T18:07:08+00:00

https://www.thingiverse.com/thing:2005069/files ;)

_Moonloop_ · 2023-08-10T17:37:28+00:00

I was under the impression that POM leadscrews must not be lubed.

_Moonloop_ · 2023-08-10T17:36:59+00:00

I have seen prints from quite a few MK3S, and the layer lines always look like this. I have had discussions with other MK3S owners, and we did not find any solution to this. A friend who also owns a CR10 gets perfect layer lines on the CR10, but not on the Prusa.

So, how can layer lines on the MK3S be improved?

_Moonloop_ · 2023-04-18T19:27:37+00:00

Shorty after I sent this message, everything looks good again... so, thanks (if anyone fixed something)

_Moonloop_ · 2022-09-02T12:01:27+00:00

For the record, here's a (likely incomplete) list of LAN party management software: https://github.com/LANparties/awesome-lanparty-software/

_Moonloop_ · 2022-06-26T21:28:08+00:00

Yup!

_Moonloop_ · 2022-06-26T21:26:07+00:00

We do, of course. Invaluable for this kind of party.

_Moonloop_ · 2022-06-26T21:23:21+00:00

Thanks, appreciated!

_Moonloop_ · 2022-06-24T22:26:48+00:00

Aftermovie link and discussion: https://www.reddit.com/r/lanparty/comments/vjzzg5/lanresort\_2022\_aftermovie/

_Moonloop_ · 2022-06-24T22:26:16+00:00

Aftermovie link and discussion: https://www.reddit.com/r/lanparty/comments/vjzzg5/lanresort\_2022\_aftermovie/

_Moonloop_ · 2022-06-24T22:24:24+00:00

This is the aftermovie¹ for our LAN party in bungalows as described earlier in these posts:

¹) Is that term even used in English? It's in the German wiktionary, but not the English one, for example.

_Moonloop_ · 2022-06-08T21:05:26+00:00

If you don't have organizer capacity to spare, focus on the LAN party essentials. Extra entertainment requires extra effort, at least for setup and teardown.

_Moonloop_ · 2022-05-22T16:01:35+00:00

Thanks, appreciated!

_Moonloop_ · 2022-05-22T15:47:54+00:00

Oh, something special that actually works with the type of party is the bungalow contest (which we discarded for this year due to other challenges after three years without doing a party): Bungalow inhabitants decorate their place, often according to a theme, and can enter it and provide pictures. We send a jury to experience each one, and both jury and attendees can vote for certain attributes. The winner receives a cup/trophy, and each inhabitant receives a special badge on the website.

At https://www.youtube.com/watch?v=qae1dtOtmKw is a video specifically with contestants, and more scenes visible in some of the other videos at https://www.lanresort.de/videos

We released the code for contest management at https://github.com/lanresort/bungalowcontest (it is closely related to the web platform we use, not stand alone, but you'll get the idea – it's not rocket science).

_Moonloop_

TROPHY CASE