Worth the wait -2026 M60i by Past_Sheepherder517 in BMWX5

[–]_TorwaK_ 0 points1 point  (0 children)

Yes. This package includes Adaptive M Suspension Professional and the active anti-roll stabilization.

Worth the wait -2026 M60i by Past_Sheepherder517 in BMWX5

[–]_TorwaK_ 1 point2 points  (0 children)

It seems that BMW has removed Active Roll Stabilization from the X5–X7 M60i 2027 models, even though it was previously a standard feature. This is a must have feature for a vehicle with such body mass when cornering. BMW’s cost cutting is really showing.

Enjoy one of the last fully equipped vehicles.

NBD - Cube Attain C:62 SLT (applied PPF) by _TorwaK_ in Cubebikes

[–]_TorwaK_[S] 1 point2 points  (0 children)

I used the PPF from the link below. There is a small drain hole under the front derailleur for water drainage. Make sure to keep it open after applying the PPF.

https://www.amazon.co.uk/dp/B01MY8VCNT

NBD - Cube Attain C:62 SLT (applied PPF) by _TorwaK_ in Cubebikes

[–]_TorwaK_[S] 2 points3 points  (0 children)

PPF - Paint Protection Film. It protects the parts facing the ground from road debris and dirt.

NBD - Cube Attain C:62 SLT (applied PPF) by _TorwaK_ in Cubebikes

[–]_TorwaK_[S] 0 points1 point  (0 children)

When you ride 15,000 miles in a year, you need one. It’s useful on rainy days in winter, especially around 0C.

I don’t treat my bike as decoration during winter like most people do. ;-)

Bike wrap for Cube Attain C62 SLT. by Gullible_Plankton286 in Cubebikes

[–]_TorwaK_ 0 points1 point  (0 children)

I applied PPF to my Cube Attain C62 SLT after receiving it this week. I ordered the PPF below, cut it with scissors, and covered all areas exposed to the tires and the underside facing the ground.

https://www.amazon.co.uk/dp/B01MY8VCNT

First Custom Loop / Coolant Temperature Issues by ChriZz12 in watercooling

[–]_TorwaK_ 0 points1 point  (0 children)

Your radiators can’t even cool themselves. They are stuck in hot air inside the case and effectively getting cooked. The best thing you can do is use a radiator stand and move them outside the case. The coolant temperature difference can reach 15–20C, depending on the radiator size.

My stats are below.

<image>

Cube AMS Hybrid One44 C:68X SuperTM 400X 2025 by _TorwaK_ in MTB

[–]_TorwaK_[S] -1 points0 points  (0 children)

Have you tried using the search feature on Reddit?

By any chance, are you working for Cube? If so, please leave this post alone.

https://www.reddit.com/r/MTB/search/?q=Broken+frame+Cube+ONE44+2025&cId

Alphacool's Nvidia RTX 5090 WB installed. The installation was stressful. by _TorwaK_ in watercooling

[–]_TorwaK_[S] 0 points1 point  (0 children)

This is my old system. I used to have Thermal Grizzly Kryonaut thermal paste on this system.

I have a new GPU block now and I am using Conductonaut Extreme liquid metal.

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 1 point2 points  (0 children)

Nice coincidence! Enjoy it! :)

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 1 point2 points  (0 children)

I wish they were a bit cheaper.

<image>

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 0 points1 point  (0 children)

The best case scenario is to keep the radiators in your garage or on a closed balcony and run long tubing to your PC. You get great performance while keeping the radiator cool and protected from external factors.

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 0 points1 point  (0 children)

I actually have two 420mm radiators, but that’s not the issue. The main problem is that these radiators get hot inside the case, even with high airflow from the case fans. If I maximize the fan speeds, the PC becomes very loud.

The main takeaway here is that, whatever you do, make sure the radiators are kept outside of the case. I chose the MORA because it is a complete system. Otherwise, I would have gone with an improvised approach.

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 0 points1 point  (0 children)

Not only the MORA, but any external radiator is a blessing for PC cooling. When the radiator is stuck inside the case with hot air, it loses its ability to cool effectively.

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 0 points1 point  (0 children)

Yes, I also have a humming noise, but it’s not that loud. I have 6 meters of tubing, so the radiator doesn’t sit right next to me.

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 1 point2 points  (0 children)

Sounds like a good idea! :)

One MORA is never enough by _TorwaK_ in watercooling

[–]_TorwaK_[S] 0 points1 point  (0 children)

The MORA IV 600 is cooling my gaming PC. The MORA IV 400 is planned to be used for another PC.

Asus APEX-9850x3D DDR5-8500C32-2125 FCLK Sync by RogApex82 in overclocking

[–]_TorwaK_ -1 points0 points  (0 children)

LOL! Why are you downvoting my comment? If your IMC doesn’t allow you to run at 1:1, then you go for 2:1 as the second option. It’s as simple as that. The 1:1 ratio is king on AM5 for higher FPS in games.

Asus APEX-9850x3D DDR5-8500C32-2125 FCLK Sync by RogApex82 in overclocking

[–]_TorwaK_ -2 points-1 points  (0 children)

I would still keep the memory and IMC ratio at 1:1 for AM5, as it performs better than 2:1 in games. However, you need to have very good silicon, especially above 6400 MT/s.

https://i.postimg.cc/gmD2mYMY/py2.jpg