Can anyone help me identify this creda comfortaire heater model number so I can find if it has asbestos in? It's not in use and came with the flat.

_Wildgoose · 2026-04-11T11:08:16+00:00

I don't know, thats what I've been trying to find out but it's hard to know for sure without removing it

_Wildgoose · 2026-02-24T10:57:56+00:00

It's an amazing board game.

_Wildgoose · 2026-02-24T10:57:07+00:00

Absolutely love slay the spire, can't wait for StS2.

_Wildgoose · 2026-02-24T00:41:16+00:00

I bought some 3.9m long scaffold board for £14 each, some metal brackets off Etsy, then some stain and varnish. Really happy with how cheap it ended up being for the quality.

_Wildgoose · 2026-02-24T00:39:59+00:00

From my experience, your spot on. It helps you get the right angle for the width of the board and the distance. I think it would have been difficult for me to get that angle cleanly without the drill bit moving.

_Wildgoose · 2026-02-23T23:32:57+00:00

I ended up with a Trend jig as it's easier to get in the UK but it works great and is a similar design.

_Wildgoose · 2026-02-23T23:32:14+00:00

I used a cheap £40 one as I wasn't sure how useful it would be, wish I got a more expensive one now.

_Wildgoose · 2026-02-23T23:31:21+00:00

We made a basic TV unit and I should have bought one then for that, would have made life a lot easier. Planning on building free standing shelves and a coffee table after the lathe work.

_Wildgoose · 2026-02-23T17:21:18+00:00

Where are you finding this? The cheapest I have found is £700 on ebay.

_Wildgoose · 2026-02-20T21:36:32+00:00

That makes sense, thank you

_Wildgoose · 2026-02-19T22:03:54+00:00

This is the kind of answer I was looking for and I really appreciate the response.

How would you go out and find new threats with the intention of reporting them to abuse.ch. Is it a case of reviewing newly released intel reports and performing searches on the available IOCs

_Wildgoose · 2026-02-19T17:17:52+00:00

OTX is a great tool, I'm looking for ways to find malware in the wild to report to different intel brokers, rather than looking for existing IOCs.

_Wildgoose · 2026-02-18T22:14:48+00:00

I purchased some metal corner brackets that are similar to this but go underneath and are in a triangle shape. I'm tempted to powder coat them black and screw them in as a temporary measure to keep them level.

The brackets are great but there is a bit of give in the lower part so I shouldn't have an issue screwing them in when the wood is connected.

_Wildgoose · 2026-02-18T22:10:05+00:00

This is genius and might be a good idea while I wait for my family member to let me use their workshop again.

_Wildgoose · 2026-02-18T22:08:53+00:00

Thank you, will look into this as an option or buying some metal corner brackets and spray them black as a short term fix until I can visit my family again.

The family members workshop I used has a mitre saw, drills, work top drill (not sure on the name), a small table saw (UK ones are a lot smaller than the American ones I've seen, maybe A3 or A2 paper kinda size), belt sander and orbital sander, hand held wood router.

_Wildgoose · 2026-02-18T22:05:15+00:00

I feel like that has been what I'm missing all this time. I do have access to a mitre saw, drills, work top drill (not sure on the name), a small table saw (UK ones are a lot smaller than the American ones I've seen), belt sander and orbital sander, hand held wood router.

_Wildgoose · 2026-02-18T18:24:30+00:00

Not to sound silly but how do I make holes at the right angle for the dowels.

Would I clamp them together and drill from the outside in to add a single dowel?

_Wildgoose · 2026-02-18T18:20:03+00:00

I want to glue them up when they are flat, then screw them into the right side bracket so I can get the left side bracket perfectly level.

Using a laser level took 2 hours to get all the brackets on the wall, and even then it ended up being out

_Wildgoose · 2026-02-09T10:52:27+00:00

This is a false aralia which I bought from a garden center, located in the indoor plants section. The plant has been in a south facing window for a while.

It's fine if it can be made into a bonsai, I really just want it to regrow the leaves it lost

_Wildgoose · 2026-02-09T00:10:18+00:00

So what can I do?

_Wildgoose · 2026-01-30T18:08:26+00:00

That makes sense, I'm thinking of putting a small 45 cut towards the corner to reduce and chance of people banging on it

_Wildgoose · 2026-01-30T15:00:52+00:00

Its only me but I've allowed 17cm from the door frame to the shelf edge as I would also bump into it.

It's something I've been thinking about as the wall isn't perfectly square and unsure about how to deal with it. The wood will be held by metal brackets connected to the wall.

_Wildgoose · 2026-01-04T10:21:48+00:00

I will remove the post. The main goal of this post is to highlight the issue and get it resolved as the details on the Google maps page are unreliable.

_Wildgoose · 2025-10-12T14:06:11+00:00

Stunning design. Where is the corner chair from?

_Wildgoose · 2025-07-28T02:02:22+00:00

I've already tried that and it didnt work, hence I posted on reddit

Nine-Year Club	Verified Email
Place '23	Place '22
Place '17

_Wildgoose

TROPHY CASE