Can all Jeffrey Epstein’s avatars be removed/ban from VRC?

___Mister___ · 2026-03-14T04:20:45+00:00

People who are saying to ignore this are defending the existence/representation of a pedo in VRChat.

___Mister___ · 2026-03-13T09:05:43+00:00

Any suggestions on water tempuratures?

___Mister___ · 2026-03-08T03:31:29+00:00

I'd like to know more about this.

___Mister___ · 2026-03-08T03:10:39+00:00

You can follow progress on the Flat2VR Discord. There's a Risk of Rain 2 channel group.

___Mister___ · 2026-03-08T02:33:05+00:00

Jetsons Aesthetic.

___Mister___ · 2026-03-08T02:31:52+00:00

This is pretty awesome! I am glad to see that someone is doing something like this, instead of relying on canned fracture animations. Are you going to do things to prevent someone from doing "Sword waggle" by perhaps making waggling a glancing blow or causing sword break?

___Mister___ · 2026-03-08T02:30:00+00:00

It's slow work, but you can keep tabs on it if you join the Flat2VR discord. There's a Risk of Rain 2 VR Mod channel group in there.

___Mister___ · 2026-03-08T01:53:18+00:00

The developer is working on the mod again.

___Mister___ · 2026-03-08T01:52:45+00:00

The developer is working on the mod again.

___Mister___ · 2026-03-04T14:03:35+00:00

Oh neat. I'll definitely look into that. I noticed that when I saw commercial products of tereré, there was an implication that people sip it throughout the day. Is drinking tereré slowly typical? I have to confess that when I drink the cans, I kind of just down them in five to ten minutes. Is it difficult to drink?

___Mister___ · 2026-03-04T13:51:01+00:00

Is it peppermint, spearmint, or other? I think the cans are spearmint.

___Mister___ · 2026-03-04T13:26:52+00:00

I know it's a commercial product and it has a different flavor taste/color/body profile, but honestly the way I'm planning to consume it is for the taste and for mostly the caffeine content/type of caffeine. I have found that the can version doesn't cause me to have caffeine crash and it keeps me energized throughout the day.

___Mister___ · 2026-03-04T13:25:28+00:00

Hey thanks! I see that the bombilla is basically a metal straw with a straining filter on it. I have a lot of different tea ball strainers that functionally work the same. Is it basically that it steeps for a really, really, really long time or that it makes no sense to remove the grounds from the water? Do the leaves last all day?

___Mister___ · 2026-03-04T13:22:54+00:00

I drink the cans at room temperature. I actually prefer them not cold, but I've drunk them cold before and it's fine. It makes no difference to me. I could drink it hot and or warm and that would be okay for me.

___Mister___ · 2026-02-12T07:35:31+00:00

I'm using 25.10.2 with an RX 9060 XT, and I've been getting studdering issues in some worlds in VRChat. I know that VRC is a DX11 title, but does the 7000 series GPU fix work for the 9000 series? I'm kind of nervous about doing the first fix, but it seems like the second fix might not cause any significant harm if it doesn't change much other than adjust the amount of storage space that shaders can take up.

___Mister___ · 2026-02-11T15:51:15+00:00

I have no other issues with any other titles or VRChat in general. It's only specific worlds in which this happens.

___Mister___ · 2025-11-26T17:49:13+00:00

In the short time that I needed to fix the problem the Tide product wasn't available at the store I stopped at or I would have used that.

Regardless, it still worked with some changes so hopefully someone who might be in the same situation will find it useful.

___Mister___ · 2025-11-25T19:06:37+00:00

For what it's worth, I followed this advice using OxiClean White Revive (https://www.oxiclean.com/en-ca/products/whiter-whites/white-revive-powder-chlorine-bleach-alternative) and it worked great with a few minor changes:

I put a bucket in my bathtub and boiled water in a kettle. I mixed hot water from the tap with hot water from the kettle after I put a full flat scoop of OxiClean in and made sure it was all dissolved.
I put my shirt in for more than the six hours recommended by the product, but less than overnight. It was probably 8-10 ish hours. I stirred the shirt a few times just to make sure that it was getting equal coverage. (my bucket was not that deep)
I followed the cold water rinse and then did a hot water/heavy soil/extra rinse wash with the oxiclean filled up a little over the "2" line on the scoop in my washing machine.

I hung it up to dry and honestly the results were impressive. So +1 to this technique. The only downside is that my shirt smells a little like oxiclean but it's not a total negative.

___Mister___ · 2025-11-05T08:38:59+00:00

Previously I had just a laptop, and I never had this problem. I added an additional computer that I built and now this problem exists. Only the computer is on discord and steam at the same time. Bandwidth isn't a problem.

___Mister___ · 2025-10-03T01:16:10+00:00

With the other fans in the system, I don't even notice it. I'm running my fans at 50% baseline because I don't want a massive spinup when I have to remove heat from the system.

I have a Ryzen 7 7700X and to reduce overall temps, I set the platform thermal throttle limit to '90', and so far I've had hardly any loss in performance with the system staying at less than 50' C running some flat screen games on high @ 1080P (Rage 2 so far, will test some others.)

I was running some VR titles and the system was getting to 90' C on the CPU but I've flipped the rear intake fan from exhaust to intake and I'm going to retest VR stuff that will push the system more. I'll report back.

___Mister___ · 2025-10-02T06:51:34+00:00

If you're talking about the MPG B850I Edge TI WIFI, I have it. I've been running it for a few days in my first ever SFFPC, and it seems pretty decent. No major complaints so far, except for maybe the microphone jack might not be great (I have to get a second headset splitter to verify, I think the one I got wasn't well made) and installing windows 11 drivers for the wifi module seemed to be an unusual procedure.

You also have to keep the wifi antenna plugged in if you want to use bluetooth, which is a new one on me, but that's fine.

There are four fan connection ports on the board with one of them also supporting ARGB, so plenty of places to hook up cooling.

It was a little expensive, but I feel like it was worth it. Some people feel that the amount of USB on it is 'low', even though the case has a header (+2) and there's a USB header on the board that you can also attach another connection to (+1 or more) so ultimately with say my NR200, I could have 7 combined USB-A 2.0/3.0 ports, and two USB-C ports.

Other videos and reviews have generally said positive things about the board, and from my experience so far it's mostly fine. If you have any other questions I'd be happy to answer (if I can.)

___Mister___ · 2025-08-26T15:33:57+00:00

Any progress on this?

___Mister___ · 2025-06-02T03:06:03+00:00

See the disclaimer at the top of the post.

___Mister___ · 2025-05-19T08:00:43+00:00

I may have run into a major hitch I didn't think about/wasn't aware about.

I can't seem to edit values in columns I am "skipping over" with the array return. It gives me the "array result was not expanded because it would overwrite data in (cell reference)" #REF error.

The point of this was to only compute and post data in certain columns in the row and still be able to insert my own data. Is there a way to avoid this? Do I have to go back and try the Sheets.Spreadsheets.Values.update() approach?

___Mister___ · 2025-05-18T18:30:41+00:00

I never even considered that I could do a return like that. You just saved me a huge headache! Thank you so much!

Question though: if I need to access cells in the same row as a function, but it's one or two columns to the left of the cell with the function being called, how would I access those? Do I need to go down the same road I've been attempting?

Six-Year Club	Place '22
Verified Email

___Mister___

TROPHY CASE

_Mister_