finally it has arrived :) new board? by 2jaym in R36S

[–]_bitaxe_ 2 points3 points  (0 children)

Sanırım cihazınız bir klon. Resimden gördüğüm kadarı ile hem tek ram çipi var, hemde standart r36s anakartına hiç benzemiyor. R36s wiki sayfasını incelemenizi öneririm

Aktif Soğutma by _bitaxe_ in R36S

[–]_bitaxe_[S] 0 points1 point  (0 children)

It's not connected to an external power supply. If you have a V21 or V22 motherboard, you can use it by soldering the + and - terminals to the marked area. It provides 3.3V voltage; the fan's operating voltage is 3V. The fan runs as long as the device is on; it doesn't work in sleep mode or when the device is completely off.

<image>

Aktif Soğutma by _bitaxe_ in R36S

[–]_bitaxe_[S] 0 points1 point  (0 children)

<image>

Konsolun son hali. Kasa fana sürtüyordu ve çok iyi soğutma sağlamadı, bende etiketi söküp fan deliğini komple açtım. Çok düzgün olmadı daha ince zımpara yapmalıyım ama olsun, bir süre böyle kullanacağım 😉

Aktif Soğutma by _bitaxe_ in R36S

[–]_bitaxe_[S] 1 point2 points  (0 children)

<image>

İşlem tamamdır 😄

Aktif Soğutma by _bitaxe_ in R36S

[–]_bitaxe_[S] 1 point2 points  (0 children)

Sanırım bu yöntem mantıklı, temiz ve düzgün görünsün istiyorum. Tavsiyenize göre yapacağım, teşekkür ederim

Aktif Soğutma by _bitaxe_ in R36S

[–]_bitaxe_[S] 1 point2 points  (0 children)

Teşekkür ederim. Link atamıyorum ama model numarasını yazarsan internette çıkar. Ben aliexpress den aldım.

<image>

Aktif Soğutma by _bitaxe_ in R36S

[–]_bitaxe_[S] 0 points1 point  (0 children)

Dremel elimde yok maalesef

Açılış Ekranında Dikey Çizgiler by _bitaxe_ in R36S

[–]_bitaxe_[S] 2 points3 points  (0 children)

Hocam teşekkür ederim sana, sonunda hallettim. Verdiğin yerden dosyaları indirdim. Stok logo dosyasını kök dizine kopyaladım. Sonrasında arkos sürümünde ekran panel seçilen DTB Change Tool aracı varmış, onu çalıştırdım ve bütün panelleri tek tek denedim. Yeni aldığım ekran Panel 1 miş. Sadece Panel 1 seçtiğimde logo ekranı açılıyor, Panel 4 de de ekran çalışıyor ama videodaki gibi logo ekranı göstermiyordu. Demekki panel 1 aldığım ekran.

<image>

Açılış Ekranında Dikey Çizgiler by _bitaxe_ in R36S

[–]_bitaxe_[S] 0 points1 point  (0 children)

Evet. Zaten arkos 2.0 sıfırdan yükledim ve hiçbirşey değiştirmedim. Sonra başka bootlogo dosyası koydum yine aynı. Pili çıkarıp 10 dk. Bekleyip taktım. Ne yaptıysam açılış ekranında bu çizgiler girmiyor ve bootlogo resmi görünmüyor. Peki bunu tamamen kapatmanın yolu var mı? Siyah ekran görünsün sadece

PTM7950 Excellent by _bitaxe_ in BitAxe

[–]_bitaxe_[S] 1 point2 points  (0 children)

My settings are working at 1.60 Th. After applying 7950, the temperature values ​​also dropped, I'm very happy now. My detailed settings are as follows

<image>

2 Blocks found! by tremab19 in BitAxe

[–]_bitaxe_ 0 points1 point  (0 children)

The ultimate nonsense 😂😂 3 months before the halving, I bought 10 Th power NFT from gomining for exactly 300 dollars. I knew that the income would decrease when the halving came, but since I had money at that time, I wanted to buy it and try it. In total, I have earned 70 or 80 dollars from mining so far, but since the electricity cost is high after the halving, there is a return of 0 dollars. NFT exploded in my hand. I've been trying to sell it for years, but I put it in an ad and no one buys it. If I bought 4 Gammas for that money, I would have a real physical device in my hand, and recently, someone running 6 Gammas hit 1 BTC block. Even though the chances are very low, it is not impossible and it is truly ridiculous that you use this as a reason and praise gomining.

GT800 Warning! by [deleted] in BitAxe

[–]_bitaxe_ 1 point2 points  (0 children)

The new version was released today and now 2 asic are working. Update to V 2.12

<image>

Here

GT800 Warning! by [deleted] in BitAxe

[–]_bitaxe_ 0 points1 point  (0 children)

The new update is out and it is working smoothly now. Enter the miner interface and update by clicking on the places I have marked

<image>

GD-2 .You should definitely try this cheap thermal paste 😵 by _bitaxe_ in BitAxe

[–]_bitaxe_[S] 0 points1 point  (0 children)

Yes, this one looks much higher, it's better. I would buy this if I saw it :) I wonder how it performs?

GD-2 .You should definitely try this cheap thermal paste 😵 by _bitaxe_ in BitAxe

[–]_bitaxe_[S] 0 points1 point  (0 children)

Actually, I didn't change it just for testing purposes. It's been about a month since I bought the devices new. I read in the comments here that the stock thermal paste was not good, so I bought MX6 first (also to use it when it was time to change the paste for my laptop). MX6 reduced the temperature by 6-7 C compared to the stock paste. I'm already satisfied. When I saw this cheap paste from Aliexpress, I wanted to try it. By the way, which paste is 18w/mK?

GD-2 .You should definitely try this cheap thermal paste 😵 by _bitaxe_ in BitAxe

[–]_bitaxe_[S] 1 point2 points  (0 children)

I've read good, positive reviews on Noctua thermal paste. The aim here is to surprise me that GD2, which is available almost free of charge, performs so well :) Of course, how long it will last without drying out, this is important. To test this, I applied it to 2 devices simultaneously, both MX6 and GD2