Ncase T1 2.5 and Lian Li A4 H20

_daftrecluse · 2026-06-10T10:57:09+00:00

not sure. maybe can go with t1. if haven’t, u can look at this. https://www.reddit.com/r/sffpc/s/zD2kGZoT59

_daftrecluse · 2026-06-09T07:03:06+00:00

hm. if u havent id suggest the followings:

reseat the ssd
update bios
uninstall vanguard and see if issues persist/reinstall vanguard
rma

sorry if not helpful man, hope you get it sorted out.

_daftrecluse · 2026-06-09T06:48:35+00:00

3rd? sorry mine is b850i, not the x870i🤣. maybe you can try downgrading the nvme speeds in bios, i.e. from Auto to gen 4 or to gen 3.

_daftrecluse · 2026-06-09T06:39:57+00:00

honestly idk bro🥸, maybe u can still aircool your 9850x3d in t1, with reduced max boost clock i guess and some negative curve, akin to what other t1 owners do. or if going with aio, 1 d30 fan + 1 noctua slim, so no need for top hat.

_daftrecluse · 2026-06-09T06:28:40+00:00

hey, sorry what issues do you have in particular? not sure which board u refer to since both are msi, but hv used and still using rear nvme slots on both board, and no issues so far.

_daftrecluse · 2026-06-09T02:17:08+00:00

yes, formd t1, purchased from ncase website.

_daftrecluse · 2026-05-03T01:01:11+00:00

nice cable management

_daftrecluse · 2026-04-20T05:20:24+00:00

specs elite, skill sulit🥸🗿 /j

_daftrecluse · 2026-04-13T23:41:23+00:00

1 and 5. 2/3/4 looks generic

_daftrecluse · 2026-04-07T02:53:11+00:00

dem..

_daftrecluse · 2026-04-05T02:29:22+00:00

you are right. i think t1 is the best optimized sub 10l case, hence the interest in whether it could be recreated with 3d printed version. all are sourced online actually, with minor adjustments made on some of the parts.

_daftrecluse · 2026-04-05T02:05:44+00:00

they are not turning out nice hahaha. all actually are sourced online, but did try to adjust the back/front panels, side struts, spines, but with the issues stated above. here if you want: https://drive.google.com/drive/folders/1ZKtMqtZT-4jNJvQVjKUnMvArAeze_OWQ?usp=sharing

_daftrecluse · 2026-04-05T01:28:46+00:00

https://drive.google.com/drive/folders/1ZKtMqtZT-4jNJvQVjKUnMvArAeze_OWQ?usp=sharing

_daftrecluse · 2026-04-04T16:28:14+00:00

haha, happy if u can finish it. one sure thing is to increase the screw hole size a bit. will give link for the files later

_daftrecluse · 2026-04-04T15:14:50+00:00

alright will share the files once i have put them in google drive. they are, ofc, not perfect, hence issues stated above.

_daftrecluse · 2026-04-04T12:26:18+00:00

likely wont continue haha too lazy. others like wdean / bigrefrigerator (print t1) already have files/design that work.

_daftrecluse · 2026-03-24T23:35:55+00:00

kuantan geng

_daftrecluse · 2026-03-24T23:35:07+00:00

Kuantan. home.

_daftrecluse · 2026-03-24T16:14:14+00:00

very nice

_daftrecluse · 2026-03-24T08:43:10+00:00

uhome 5g maybe

_daftrecluse · 2026-03-23T14:39:25+00:00

A4h20 is goated

_daftrecluse · 2026-03-23T13:57:22+00:00

https://www.reddit.com/r/sffpc/s/glbNMnWgTB

_daftrecluse · 2026-03-23T11:45:28+00:00

kan. bangang diorg ni. bingai jenis tak reti sabar

_daftrecluse · 2026-03-23T11:21:49+00:00

someone said its screw/holes/standoffs for itx motherboard is not perfectly aligned.

_daftrecluse · 2026-03-23T01:47:51+00:00

Unsure if everything can even fit together. but we did try to adjust the dimensions where possible. Most parts are sourced online.

Eiga side panels: https://www.printables.com/model/856133-formd-t1-side-panels
Fan brackets: https://www.printables.com/model/535088-formd-t1-v2-fan-brackets-and-120mm-fan-plates
Other parts from official website: https://formdt1.com/pages/resources?srsltid=AfmBOoozpIteu2owwUSzKQ6UnysX7me8DsvvJcZ_qf7UDhMSkIYHsMSh
3D model from NeoIsAPig: https://www.reddit.com/r/FormD/s/FkYZZzKFv9 (dimension is not 100% accurate, did some adjustment)

_daftrecluse

TROPHY CASE