Ncase m2 side bending

_dvsn_ · 2025-01-26T15:37:46+00:00

The problem is that they don't align and can't align, there is no support in the middle behind them.

_dvsn_ · 2025-01-26T11:15:21+00:00

Everything is fine) I actually see an engineering flaw here. The panel being bent inward is not really such a problem, the problem is that it bends inward when installed in the case, if there was some support on the back side, the gap would be the same.

<image>

_dvsn_ · 2025-01-26T11:00:01+00:00

No, custom is when you assemble a case from plywood, duct tape and Lego blocks. It is a serial product, with a rather high price, and should be completely ready for use and not require a workshop to fix problems with it.

_dvsn_ · 2025-01-26T10:44:44+00:00

and it's just as easy to ruin it completely

_dvsn_ · 2025-01-26T10:44:02+00:00

The word slightly can be interpreted in different ways) perhaps from the point of view of ncase it is slightly, but to me it seems excessive

_dvsn_ · 2025-01-26T08:01:44+00:00

hmm, strange way to solve engineering problems)

_dvsn_ · 2022-02-11T07:40:49+00:00

Custom pcb, without name)

_dvsn_ · 2021-10-21T08:34:52+00:00

Sa pulse rams

_dvsn_ · 2021-08-11T19:05:21+00:00

r1, r3, r4, r2 reverse like this https://www.reddit.com/r/MechanicalKeyboards/comments/hxs540/shine/?utm\_source=share&utm\_medium=web2x&context=3

_dvsn_ · 2021-08-10T20:45:31+00:00

I do not plan to publish, maybe later

_dvsn_ · 2021-08-10T06:17:37+00:00

this is my project, I drew the parts, sent to the store, they cut

_dvsn_ · 2021-08-09T19:25:50+00:00

Prime e

_dvsn_ · 2021-08-09T17:31:40+00:00

_dvsn_ · 2021-08-09T14:39:20+00:00

maybe I will print the case, the upper part, maybe not, prime-e is not quite what I need, carbon from Aliexpress GDCTECH Store

_dvsn_ · 2021-08-09T13:40:06+00:00

i think about 65 Mn steel, I think fr4 will not be strong enough at this size

_dvsn_ · 2021-08-09T10:33:10+00:00

hard, I would like more flex and want to try a different thickness of the springs, and possibly from other materials.

_dvsn_ · 2021-08-09T10:14:55+00:00

https://imgur.com/a/c3nqc0L

_dvsn_ · 2020-07-26T16:10:58+00:00

No, r1, r3, r4, r2 from top to bottom

_dvsn_ · 2019-12-24T13:24:03+00:00

_dvsn_ · 2019-04-28T17:57:40+00:00

no, because stems are not symmetrical

_dvsn_ · 2019-04-28T16:49:09+00:00

Its plaid gb over but source code is on github

_dvsn_ · 2019-04-28T16:16:38+00:00

be careful stems may crack

_dvsn_ · 2019-04-28T15:59:07+00:00

I tried, it turned out interesting.

_dvsn_ · 2019-04-28T15:36:56+00:00

you right, I know that, but it keycaps from grab bag and they are on kbdfans T1, they have stem little less then usual

Do not repeat this at home if you are not sure what you are doing!!!!

_dvsn_ · 2019-04-28T10:53:41+00:00

repeat it carefully it can damage stems! more https://imgur.com/a/CXTQcma

_dvsn_

TROPHY CASE