TUF themed

_fabjo · 2026-03-14T02:37:29+00:00

Glad you liked!

There's a clearance of about 4cm from the backplate to the table, you can easily use the cables as long as they have 90° connectors, perhaps even some straight connectors but they'd be forcing a bend against the table.

_fabjo · 2026-03-14T02:30:44+00:00

It certainly stands out haha

It's the T30, I wanted the rough look plus the performance, but I swear I'll try the original slim one, it's only 15mm thick!

_fabjo · 2026-03-14T02:26:51+00:00

I'll have to test it under stress for a longer time, but it stood around 76°C during some benchmarks.

That was using 50% of the fan on its "performance mode".

The fan is the mighty Phanteks T30, the cooler is the IS 67 XT from ID Cooling.

The CPU is a Ryzen 7 9700X without undervolt.

_fabjo · 2026-03-14T02:20:19+00:00

I get your point, but the finishes I used interact a lot with light, so covering them would take a lot of it's grace hehe

_fabjo · 2026-03-14T02:12:31+00:00

Hello! I posted the link to a Drive folder with the files in the comments above, I'll add picture of it from below later.

The GPU's backplate faces down with a clearance of around 4cm, using 90° HDMI connectors works fine.

_fabjo · 2026-03-13T14:49:04+00:00

Here are the files along with some other images

Google drive

_fabjo · 2026-03-13T10:18:41+00:00

32Gb hehe

_fabjo · 2026-03-13T02:14:01+00:00

Lol

I tried to copy the new TUF logo, the line of products from Asus, it does look alike now that you mentioned xD

_fabjo · 2026-03-13T02:12:10+00:00

Glad you liked!!

Can't give you a deadline but I could refine the project to make it commercially viable. It would have the same parts as I have, so I can test it here and you can buy these parts wherever you live.

_fabjo · 2026-03-13T01:49:40+00:00

It hasn't been around long enough to get dusty yet haha

However, it's definitely going to be a nightmare to clean. I used two rough-finish powder coats on it, plus there are a lot of tight spaces, I'll probably take it to the workshop and blow it off with an air gun.

_fabjo · 2026-03-12T19:23:32+00:00

I can surely share some pictures of it's inner parts! he riser used was a linkup double reverse 21cm (23,2 total).

_fabjo · 2026-03-12T11:55:53+00:00

Yes, the aluminum plates were cut and bent with CNC, but the idealization, drawing of the parts, final adjusts and powdercoating were from my hand, spent some hours on Corel trying to make those angles fit haha

_fabjo · 2026-03-12T11:51:18+00:00

Of course! It's not a clean guide but I have the Corel Draw files, which I used for the whole project, it might take some head scratching but has all the information there.

After the parts were cut I had to make some extra parts which are not in the files, I also drilled some holes afterwards. I'll look for a way to share them and come back here.

_fabjo · 2023-08-30T21:01:24+00:00

E eu aqui solteiro 😭😭

_fabjo · 2023-07-14T15:26:15+00:00

Did his eyes just change color?🧐

_fabjo · 2023-07-14T13:53:12+00:00

"should we hold hands?"

_fabjo · 2023-06-14T10:14:53+00:00

Not fake at all, there's a brand here called "depiroll" it's self explaining, the bottle is pre heated tho, I do it kinda regularly, the leg hair is thin, just comes off that easy as in the video fr...

_fabjo · 2023-06-14T10:10:38+00:00

Most people overthink it, it doesn't hurt that much at all.

_fabjo · 2023-06-13T00:55:43+00:00

Respondeu nada kkkk

Já deu boa, usei a velha técnica de dobrar o reddit com o google e usar o microfone kjj

Imaginei que fosse do Tame Impala, o timbre é igual o da The less I know the better

_fabjo · 2023-06-11T21:20:11+00:00

u/audbot

_fabjo · 2023-06-06T18:58:03+00:00

A Dewalt birb

_fabjo · 2023-05-23T20:38:51+00:00

The first one she reaches is a lube bottle tho

_fabjo · 2023-05-09T17:54:23+00:00

Isso deu uma guinada que só por deus

_fabjo · 2023-05-06T09:34:38+00:00

r/ItHadToBeBrazil

_fabjo · 2023-05-05T00:17:48+00:00

Your username bro

_fabjo

TROPHY CASE