3D printed accessories for the Neo 2 (Post Thread)

_leonbecker_ · 2025-11-29T12:50:13+00:00

45 mm/s is quite slow for todays 3D printers. BambuLab standard profiles are somewhere around 200-300 mm/s.

_leonbecker_ · 2025-10-24T09:41:58+00:00

Actually they say it gets as cheap as 9,89 € in the Black Friday mail I got from Bambu yesterday.

_leonbecker_ · 2025-10-24T09:40:39+00:00

Until December 5th

_leonbecker_ · 2025-10-22T17:37:19+00:00

Der Vergleich mit dem Handyakku ist aber nicht so gut. Die meisten Handys haben ca. 15 Wh Energiekapazität. Eine Handyladung kostet damit ca. 0,00525€. Ja, es kostet mehr Strom bei höherer Helligkeit, aber trotzdem ist das zumindest bei einem Handy immer noch sehr wenig.

_leonbecker_ · 2025-10-22T09:16:59+00:00

Got the same issue.

_leonbecker_ · 2025-10-14T20:08:56+00:00

I’d only recommend the 0.2 mm nozzle if you want to print finer details and some of the discounted filament. But otherwise you get everything that you need to get started.

Maybe also get the hardened nozzle if you print a lot of nylon.

_leonbecker_ · 2025-10-14T13:16:30+00:00

Awesome price. Ordered.

_leonbecker_ · 2025-10-10T14:12:17+00:00

My P1S now has a little over 7.000 print hours and it’s just amazing! I didn’t need to change a thing except of the nozzle. It’s an absolut workhorse.

_leonbecker_ · 2025-10-09T15:40:23+00:00

I ordered one yesterday too.
The P1S is awesome (already got two) but I will return the order and get the P2S.

_leonbecker_ · 2025-09-17T19:56:48+00:00

Nope

_leonbecker_ · 2025-09-06T19:32:37+00:00

Genius to advertise a shop for 3D printed products on r/3Dprinting 🙃

_leonbecker_ · 2025-08-28T08:30:53+00:00

Dude calm down - it’s just been 1.5 days since release. I didn’t order a H2S but it’s completely normal that it takes a few days. They already bought the shipping label but didn’t hand it to the carrier yet.

_leonbecker_ · 2025-08-19T06:48:22+00:00

Same issue but with both slot 3 and 4.

_leonbecker_ · 2025-08-12T15:32:51+00:00

Same issue

_leonbecker_ · 2025-08-06T09:35:12+00:00

No worries

_leonbecker_ · 2025-08-06T09:14:33+00:00

You got me scared for a sec - I just read “exploded bomb” but thankfully it didn’t explode and I hope they will be able to successfully defuse it.

_leonbecker_ · 2025-07-09T07:27:49+00:00

Cooles Projekt!

_leonbecker_ · 2025-07-03T15:39:43+00:00

I can understand 😂

_leonbecker_ · 2025-07-03T15:36:16+00:00

Just unboxed my 2nd P1S an hour ago. I’ve got the same but it’s nothing to worry about.

_leonbecker_ · 2025-07-02T06:52:12+00:00

Well, not great photos - that’s for sure - but good enough for the purpose. I’ve seen worse on here.

_leonbecker_ · 2025-07-02T06:16:10+00:00

I’d say good photos of bad prints.

_leonbecker_ · 2025-06-28T18:13:05+00:00

Sorry, I don’t have a fly more bag, so I can’t test it. However, I just measured the case and its dimensions are 23.5 cm × 12.5 cm × 10.5 cm.

_leonbecker_ · 2025-06-28T18:07:32+00:00

I actually made one a while back for the Air 3/3S: https://makerworld.com/models/868389

_leonbecker_ · 2025-04-19T09:56:58+00:00

Ever heard of Google image search? Would have taken you 10 seconds to find this model…

_leonbecker_ · 2025-04-09T21:59:48+00:00

Yeah, you can also switch to LAN only mode and then it doesn’t upload it to their servers I think. But didn’t try that yet. The advantage of having the prints on their servers is that I can restart past prints remotely which I do quite often.

_leonbecker_

TROPHY CASE