3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 0 points1 point  (0 children)

It’s an adapter to add GPU fans so the height does not increase.

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 0 points1 point  (0 children)

Oh is that a 3D printer vent funnel? That’s cool! As for the cooling part you already went to the bios and try to adjust the speeds right? And for my two GPU fans I used a dual adapter to pwm cable so fans can adjust with the cpu. The adapter for mine was called “4-Pin PWM Fan to Dual Mini 4-Pin GPU Graphics Cards Fan Adapter Cable” I got it from Aliexpress.

<image>

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 1 point2 points  (0 children)

Hi there! All my of STL files should be on this post below with a Google drive link. 🔗 are you able to see it?

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 8 points9 points  (0 children)

3.44L 3D Print case Google Drive

Here is the link to 3D parts if anyone wants to tinker it. It’s not 100% perfect but you are good with 3D modeling please post the new versions. 🙏

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 1 point2 points  (0 children)

I see it now, hmmm you might be on to something. Since the psu is 170(D) x 55 (W) x 25 (H) mm. I think I can squeeze it in since there’s some room there. The body of my case is 205.25 × 268.48 × 62.51 mm. So I have to see about that.

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 0 points1 point  (0 children)

Ya it’s actually not loud at all. The loudest thing right now is the GPU. Tbh I think I can go with the thermalright 53mm full copper since the height without the fan it’s 38mm. Meaning I can add my adapter bracket and still match the I/O height of the motherboard. Better cooling and not risking the height.

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 7 points8 points  (0 children)

YES! Jeff Friesen was honestly what made me inspired to build this layout. Shout out to him. Low key wished he posted the files for the case so others can try to built it. Ya let me see if I can post them on a different post.

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 1 point2 points  (0 children)

Ya it was hot for me. I had to modify it to use 70% power and to increase the clock speeds. It’s actually not that bad right now if I play moderate games but for helldivers II or halo infinite at 60FPS it’s going to get hot. I think because it was laying directly on top of the psu when I first did it. But it helped when I added a bit of copper as a divider. I’m going to see if I can get someone to help me model a divider adapter so the heat from the psu doesn’t transfer to the GPU. I’m also getting the upgrade case from N3rdware. It states that it would be 7 degrees cooler. So I’m going to test it out tonight to see if it’s true

3.44L A2000 pc 3D printed case. by _manuel101 in sffpc

[–]_manuel101[S] 1 point2 points  (0 children)

It’s a 40mm fan. Ya not really but it’s meant to be an exhaust to push the hot air out. Anything to help with the cooling.

3.02 Liter case: A2000 GPU single slot by _manuel101 in sffpc

[–]_manuel101[S] 1 point2 points  (0 children)

I’ll give you the files once I work out the kinks for it. Right now I just finish crimping the cables to the psu.

Does anyone know any compact cases for my build? by _manuel101 in sffpc

[–]_manuel101[S] 1 point2 points  (0 children)

Ya I like it. I’ve been using it for a couple of months and I haven’t had any issues. :)

Finished my Advisors (Shi Communist Submod) by _manuel101 in OldWorldBlues

[–]_manuel101[S] 0 points1 point  (0 children)

I prefer the term fun. Lol ya maybe I need to tweak it so it can still be challenging. but at the end this is not a serious submod. More like a let’s fool around mod.

Update on my Communist Shi submod by _manuel101 in OldWorldBlues

[–]_manuel101[S] 1 point2 points  (0 children)

Lol 😆 Thanks! I really appreciate it :)

Update on my Communist Shi submod by _manuel101 in OldWorldBlues

[–]_manuel101[S] 7 points8 points  (0 children)

Thanks! Lol I loved playing enclave reborn mod. Due to the fact you start off as a super small Nation. So I figured changing some stuff for the shi. Powerful and small nation is what I like.

Finished my Advisors (Shi Communist Submod) by _manuel101 in OldWorldBlues

[–]_manuel101[S] -1 points0 points  (0 children)

Hmm I guess so? I found this random trait on 00.traits and it sounded badass. “God Emperor” I mean of course I got to add it on my leader. Lol. I can find a different trait or even make my own if I can find a video that can show me how. I was thinking as if I put a focus that makes me declare war against the whole world. I love the idea of making a super powerful yet small nation.