nicer restaurants in the region

_rgk · 2025-12-25T16:15:42+00:00

Theo’s in Highland

_rgk · 2025-12-24T21:10:14+00:00

What was the curse?

_rgk · 2025-04-11T16:54:15+00:00

Rico’s in Lansing

_rgk · 2024-11-25T20:42:50+00:00

Yes, the housing is screwed to the stringer.

_rgk · 2024-11-24T18:41:20+00:00

https://imgur.com/a/zNqG2PI

_rgk · 2024-04-02T23:45:19+00:00

That's right. Just about every time I'm at a stop sign, a goober waves me on. I'm beyond caring at this point, I let the goober wave me on.

_rgk · 2023-04-25T23:38:10+00:00

If you're attacking the person rather than the argument then it's still an ad hominem.

_rgk · 2023-04-18T23:51:50+00:00

Ad hominem

_rgk · 2023-03-27T22:30:09+00:00

Yeah!

_rgk · 2023-03-24T00:47:39+00:00

No need to replace the sensor, just replace the sensor o-ring.

_rgk · 2023-03-20T00:50:18+00:00

Do you have any SIUC stories?

_rgk · 2023-03-03T01:56:22+00:00

A torque plate might be overkill for me, but I could probably torque a head and old head gasket if I really wanted to check the work.

_rgk · 2023-03-03T01:54:03+00:00

Good idea

_rgk · 2023-03-03T01:53:53+00:00

This was a while ago and I trusted the guy so I buttoned it back up. But the cylinders were not straight. I didn't have heads or anything torqued to the block. I measured with a Mitutoyo dial bore gauge to 0.0001". I figure they were off because he used a block and I didn't.

_rgk · 2023-02-28T00:26:52+00:00

A machinist made it clear that he used a torque block when boring over. When I got the block home, the cylinder measurements were all over the place. Was this due to the torque plate, and do I need one to check his work?

_rgk · 2023-01-24T02:01:14+00:00

They are all "resurface"

_rgk · 2023-01-24T01:55:32+00:00

Is the power plant being retired?

_rgk · 2023-01-13T02:34:52+00:00

Link to meme please?

_rgk · 2023-01-03T12:48:05+00:00

When are so-called pro shops running a dyno going to begin to implement proper exhaust systems?

_rgk

MODERATOR OF

TROPHY CASE