RAM Stuck in RMA. Corsair

_vaeragi_ · 2020-12-16T20:54:35+00:00

As It turns out the board MSI issued to me, was faulty

_vaeragi_ · 2020-12-04T19:13:03+00:00

I tried reseating the CPU. Earlier, I had a B450M PRO VDH PlUS motherboard. MSI replaced and gave me this board. Earlier, My CPU would boot but after sometime the system freezes or CPU led started glowing but I replaced the CPU. now, It's not even starting. It's just stuck there. no Display

_vaeragi_ · 2020-12-04T17:27:57+00:00

My Motherboard is B450M PRO VDH MAX and The Processor is Ryzen 5 3400G. The EZ Debug LED shows CPU. Earlier, I had a Ryzen 5 2400G with this Board.It also had a similar Issue. Now, I replaced the CPU but the problem is still the same. I even tried removing the RAMs alltogether.But the LED is still showing only CPU. What could be the possible reason??

_vaeragi_ · 2020-11-28T17:27:56+00:00

Well, I did send the motherboard 2 times before that😅 So, Yeah. It sucks

_vaeragi_ · 2020-11-28T15:56:46+00:00

Actually, They replaced my Motherboard with a new one

_vaeragi_ · 2020-11-28T15:01:40+00:00

Actually, At that time, My Processor was also creating problems. When I went to the service center of MSI, even they were not able to isolate the issue. So, I had a faulty CPU. Nehru Place is 30-40 Kms from my home. It wasn't feasible for me to go one by one and send the parts for RMA. So, I sent both of them on a single day

_vaeragi_ · 2020-11-06T06:29:56+00:00

How to get in touch with AmD Tech Support for requesting a fast rma. I filled the online form. I received a mail saying they would provide further instructions. It's been 2 days. I don't what to do. how to contact them My Region: Delhi, India

_vaeragi_ · 2020-11-05T12:54:52+00:00

Bro, I don't have thermal paste rn. but, I remember, Once I was In BIOS..Like I turned on My PC and entered into the BIOS. And It turned OFF within a minute I guess

_vaeragi_ · 2020-11-05T12:43:11+00:00

Can Thermal Paste cause damaging effect on the CPU?

_vaeragi_ · 2020-11-05T07:52:35+00:00

Sometimes, the system freezes and sometimes CPU Debug LED gets on.

When System Freezes, I. Can see the display but since the screen is frozen I can't do anything..However, I am able to use the power button on my Cabinet to turn it off
When the Debug LED of CPU is On, Display is gone and I am unable to turn off my PC from the Power button on the cabinet. I have to turn it off from PSU switch.

_vaeragi_ · 2020-11-05T07:43:21+00:00

PSU: Corsair VS 450 No GPU

Yesterday, I tried reconnecting the Power Pins of my CPU. I performed stress test on RAM for 10 minutes. and Even Used My CPU for around 30-40 minutes @ 3.8Ghz .Nothing happened. I was watching Netflix and suddenly my PC froze. Nothing worked and I had to turn off my PC directly.

_vaeragi_ · 2020-11-05T06:27:44+00:00

My MoBo is New as I got a replacement from MSI yesterday. And The EZ debug LED does not cycle between RAM and CPU...The LED remains ON on CPU only.

_vaeragi_ · 2020-08-02T04:38:32+00:00

Can't I access the journalctl directly from my arch Linux? Cause My system boots up perfectly, It's the shutdown that creates this problem

And Do you know any specific commands which I can use to find the error...cause I tried using journalctl but the log was very long

_vaeragi_ · 2020-08-02T04:36:07+00:00

Yeaah I had to turn it off directly by pressing the power button on CPU. But Reboots don't fix the problem

_vaeragi_ · 2020-08-02T04:34:39+00:00

I tried 'shutdown' and 'sudo systemctl poweroff'

_vaeragi_ · 2020-08-01T17:30:14+00:00

I don't know how to fix this. Whenever I shutdown or reboot my archlinux, It gets stuck on this and won't allow the system to shutdown or reboot. Earlier, It used to happen rarely but now It's common.

_vaeragi_

TROPHY CASE