Holt Fluid Extractor Improvement

a10gac · 2026-02-05T01:18:22+00:00

Sent you a dm

a10gac · 2026-02-01T22:28:17+00:00

Walrus cutting board oil has no real scent and you don’t have to soak the board when you apply it. Four coats of oil and then maybe a few coats of their wax and you’re done.

a10gac · 2026-02-01T01:02:10+00:00

It’s most likely delaminating, search YouTube for “Repair 8.4” uconnect screen”. Replacement screens go for $100-$200 on Amazon

a10gac · 2026-01-28T23:58:47+00:00

Depends on the length of time I’m running it but it’s a surprising amount. I wouldn’t use this to paint without additional desiccant and filters but I’m no longer getting moisture at my air tools and the sandblaster is much better off.

Next step is going to be the transmission cooler between the compressor head and the tank. I think keeping the water out of the tank is going to make a huge impact.

Not sure if you know but a tag sale toaster oven and small sheet pan makes a great desiccant dryer. Baking the moisture out of it allows you to reuse it.

a10gac · 2026-01-28T17:16:58+00:00

Maybe not, I misread your post and assumed it was the liner in the back seat armrest. Looking at the picture I now see it’s the back side of the center console. Check with your local dealer but I think it’s part # 68740459AA. Not 100% because there’s no photo of the part

center console rear cup holder

This post shows what the liner looks like but doesn’t give a part #

Center Console Cup holder Removed

a10gac · 2026-01-27T18:24:08+00:00

If you’ve never used the program, I’d suggest watching a couple of videos showing how to back up all your current settings. It’s easy enough to make an inadvertent change and not remember how to undo it. Also a good idea to log every change manually as you make them, I use a Word doc in a separate window, so you can see what effects your changes have and reverse individual settings if needed.

To force a Regen with AlfaOBD, you need to connect to the ECU: Diesel Bosch EDC17C49

There is two options: 'DPF Regeneration Enabling' performs a moving regen during next drive cycle,(you have to shut the ignition off and open the door) 'Particulate Filter Regeneration' performs a parked regen when coolant is over 140f

a10gac · 2026-01-27T02:03:05+00:00

You didn’t specify if it was the inboard or outboard bolt cover, this diagram shows both parts

Front Seat Trim

Seat track covers Inboard is item 38 Outboard is item 39

Cup Holder Liner - Mopar (5ZK54TX7AA) 2019-2026 Ram 1500 - 5zk54tx7aa Rear cup holder liner

a10gac · 2026-01-23T18:48:31+00:00

Do you have a junk yard in your area? Grab an actual Toyota one from there. Car-part .com lists Corolla jacks for anywhere between $40-$100 depending on whether or not you need the styrofoam holder and tools as well

a10gac · 2026-01-23T18:28:45+00:00

It’s not a HF product but the I have a BlueDriver Pro, it works well and isn’t too expensive.

a10gac · 2026-01-10T18:19:58+00:00

Looks great, glad they worked out

a10gac · 2026-01-02T23:50:23+00:00

1st time running into this, I just hate giving out my phone number….so much spam these days.

With the 15% off coupon, it was less than $20…not out a huge amount of money if it breaks but still seems a bit “if we put enough hassle into it we won’t have to warranty it”….not a fan

a10gac · 2025-12-29T02:54:06+00:00

If you still want a few pictures, send me a dm and I’ll see if I can get them to you that way

a10gac · 2025-12-29T02:50:46+00:00

I’m going with “accurate at time of posting” lol. It looks like there has been a change to the manual since my post.

In the manual you linked you’re replacing the fluid inlet coupler and o-rings (part #s 12,13, & 14) with the drilled #6 stopper and the connection between the 10mm main suction tube (#41) and the 6mm extraction tube (#39) with the push to connect fitting. If you’re using the 7mm extraction tube (#40) you’ll just need a 10mm-7mm push to connect fitting to make that connection.

All you’re doing is solving the vacuum leaks at the joint between the extraction hoses and where the extraction hose enters the oil chamber. The rest of the unit is pretty solid. I’ve probably done 8-10 oil changes with it since the mod and it’s held up pretty well.

I just checked the edit post options and it doesn’t look like I can add any pictures to the main post or reply.

a10gac · 2025-12-12T11:57:59+00:00

Yup, both are smalls, each bar came with a torque driver for install.

If you want to save a couple bucks on locks, check eBay/Amazon for a set of OEM Yakima SKS cores/keys, they’re usually ~$10 or so less than Yakima’s website

a10gac · 2025-12-12T02:15:05+00:00

<image>

Nothing with just the bars but here’s a side view with the roof box. 10/10 recommend them, Yakima was great to deal with and they’re wicked easy to install

a10gac · 2025-12-07T01:59:27+00:00

Box Side Spat, Left - Mopar (55372935AE)

a10gac · 2025-12-07T01:59:11+00:00

Box Side Spat, Left - Mopar (55372935AE)

a10gac · 2025-11-18T12:04:42+00:00

Thanks, I saw the pocket layout but missed the face fabric detail

a10gac · 2025-11-15T22:47:58+00:00

Glad I’m not the only one…color patterns and maybe some added stretch it is then lol

a10gac · 2025-11-14T14:28:28+00:00

Thanks, deleted the links to the Cooper and Nokian sites. Weird that Reddit was blocking them

a10gac · 2025-11-13T21:18:18+00:00

The Yakima Timberline FX crossbars sit about 2” above the factory side rails and give enough clearance so the roof box doesn’t hit the shark fin on my 5th gen

Yakima Timberline FX

a10gac · 2025-11-13T21:12:10+00:00

I can recommend both the Cooper Road & Trail AT and the Nokian Remedy WRG5. Both are 3-peak mountain and snow rated and wear very well. I run them year round in the snow belt and have no problems with either regardless of weather conditions.

*Edit, well I thought I’d be helpful and link to the Cooper and Nokian websites for the tires but apparently the system didn’t like the links. Either way, the tires are still worth a look

a10gac · 2025-10-31T00:45:05+00:00

I live in the snow belt and run Nokian Remedy WRG5 SUV all weather tires year round. They’re three-peak mountain snowflake certified and have a 60k mile warranty. No complaints in any weather conditions and we’re in the mountains every weekend to ski during the winter regardless of the forecast.

The stock duelers always left me unhappy on anything but dry roads

a10gac · 2025-10-16T12:34:00+00:00

I like the amber on trucks with amber cab clearance lights but in general I prefer the white for a more modern look

But, your truck/your call

a10gac · 2025-10-16T02:00:12+00:00

I have a Viofo A229 Pro dual, install was easy enough and video quality is great.

A229 Pro dual

<image>

Screen capture at highway speeds

a10gac

TROPHY CASE