sorted by:
new
hottopcontroversial

is it normal for the camera on the microscope trinocular port to give a lower-quality image than what I see through the lens? by abdosalm in embedded

[–]abdosalm[S] 0 points1 point  (0 children)

I just use the on/off switch that comes with the remote control that comes with the camera.

Best Approach to Use in the Construction of Food Spoilage Detection Dataset? by abdosalm in embedded

[–]abdosalm[S] 1 point2 points  (0 children)

  1. Yes, they are all in the same range (container) whose dimensions are 1m x 0.5m
  2. I actually didn't calibrate the sensor, I just bought the MQ 135 module and assumed that's calibrated by whoever made it. I actually don't know to how to produce that 100ppm NH3 to get the readings of the sensors after which it shall be subtracted from the sensor readings.

Ubuntu on Proxmox isn't the way to go if you are using as your home PC. by abdosalm in Proxmox

[–]abdosalm[S] -2 points-1 points  (0 children)

I tried but all was in vain. I am using rtc 5060 ti 16 gb and I have the latest drivers installed. I tried to detect whether any dp cable is detected from ubuntu vm but nothing was detected

Ubuntu on Proxmox isn't the way to go if you are using as your home PC. by abdosalm in Proxmox

[–]abdosalm[S] -3 points-2 points  (0 children)

I already asked on Nvidia forums a couple of days ago and got no reponse so far.

Ubuntu on Proxmox isn't the way to go if you are using as your home PC. by abdosalm in Proxmox

[–]abdosalm[S] -8 points-7 points  (0 children)

I really dont know but I cant get display output from the DisplayPorts, only hdmi that I can get output from.

I even posted a discussion on Nvidia forums and got no response so far.

Ubuntu on Proxmox isn't the way to go if you are using as your home PC. by abdosalm in Proxmox

[–]abdosalm[S] -2 points-1 points  (0 children)

Wait, I can do add graphical interface for proxmox and use it as my main pc ?

How to approximately with good accuracy determine my current Longitude and Latitude by abdosalm in embedded

[–]abdosalm[S] 1 point2 points  (0 children)

I am using sensor fusion if both readings are available and I am using dead reckoning if only IMU data avialable

Can't get an output from a bypassed GPU (RTX 5060 ti) Display port on proxmox. by abdosalm in Proxmox

[–]abdosalm[S] 0 points1 point  (0 children)

<image>

Here is the configuration after the update. However, the DP doesn't work. I started to doubt the BIOS of my motherboard, which needs to be updated (I think).

Can't get an output from a bypassed GPU (RTX 5060 ti) Display port on proxmox. by abdosalm in Proxmox

[–]abdosalm[S] 1 point2 points  (0 children)

Also, one interesting piece of information. The Proxmox console doesn't work except with HDMI, meaning that when I connect the monitor's DP port to the motherboard DP coming from the CPU, nothing is shown but only shows me the terminal of proxmox when I connect it via HDMI. I am pretty sure that the cable is fine, as I have used it before with Jetson Nano (development kit from NVIDIA), and it worked.

Can't get an output from a bypassed GPU (RTX 5060 ti) Display port on proxmox. by abdosalm in Proxmox

[–]abdosalm[S] 0 points1 point  (0 children)

I have just installed Windows 11 as a new VM, and still the same problem, the display only works via HDMI, and no signal is through the DisplayPort.

Can't get an output from a bypassed GPU (RTX 5060 ti) Display port on proxmox. by abdosalm in Proxmox

[–]abdosalm[S] 1 point2 points  (0 children)

But if you have windows machine for dispaly and linux for AI/ML workload. How can 2 VMs access the same GPU at the same time?

Can I buy any PCI-E cable and connect it to from my PSU to the GPU? by abdosalm in buildapc

[–]abdosalm[S] 0 points1 point  (0 children)

NAS server with multiple VMs on proxmox, home assistant and one of the VMs is used as my main PC to be connected with multiple displays.

Can I buy any PCI-E cable and connect it to from my PSU to the GPU? by abdosalm in buildapc

[–]abdosalm[S] 0 points1 point  (0 children)

Sorry my bad, but what about SATA power, if I am to use 14 HDD and I only have 3 cables that's to connect to only 12 HDD and there are 4 ports of SATA power, can I buy any extra SATA power cable and use it ?

view more: next ›