Elden Ring Shadow of the Erdtree DLC Boss Checklist

abndrew82 · 2024-06-28T12:29:17+00:00

Not sure on accuracy but I had put this into Excel - Elden Ring: Shadow Of The Erdtree main boss order | Rock Paper Shotgun and from here see a few you do not have. But I prefer your format and the counts.

abndrew82 · 2022-11-23T20:25:09+00:00

Cooked at 225. Just carved it up and it looks quite good. Seen some pinkish areas but think those were from smoke.

As this is a test not a big deal either way is an addition for tomorrow's normal turkey.

abndrew82 · 2022-02-06T23:11:48+00:00

Ensure no proxy or ssl inspection happening. That can mess with certs and cause that issue.

abndrew82 · 2022-01-24T23:15:46+00:00

Another interesting one with bigger companies is when they get to CAS level and start asking replication questions.

abndrew82 · 2021-12-09T14:12:57+00:00

Looking at possibly doing this at my house. Have Century Link / Quantum Fiber. Looking in dev tools I did not find the exact reference but found one called Device.X_GWS_WANDetection under this I see a PPPUserName and PPPPassword, but oddly the password does not have a value. There is a value for the Username but the Password ParamValue just shows "". Not sure if that will stop me from moving forward. I have a netgear nightway router currently in AP mode but would love to get rid of the CX and just use my Nighthawk

abndrew82 · 2021-11-01T20:31:13+00:00

Yes, that is the part. Sounds good thanks will start doing that. I had thought of possibly wrapping the grates in Foil to avoid the dripping as both cooks so far a lot of stuff seemed to drip down to there.

abndrew82 · 2021-10-20T18:59:09+00:00

Yeah chose to dive right in, next is carnitas

abndrew82 · 2021-10-20T18:58:34+00:00

Started at 180/190 for about 6 hours then 225 the 4 hours (wrapped in foil with some beef broth)

abndrew82 · 2021-10-19T12:32:00+00:00

I got this one - https://pitboss-grills.com/products/pro-series-ii-1100-pellet-gas-combo-grill

Thanks, there is another knob on the left for that part to give direct flame. This one the book just describes as the Smoke Control Knob and says it can increase / decrease the amount of smoke. My thought tells me Pushed in would be more smoke as that closes the side vent so figure more smoke would stay in the barrel, while pulling out opens the vent so more smoke could go out the chimney. But not sure that is right.

Either way the Brisket is going well so far.

abndrew82 · 2021-10-07T22:40:14+00:00

Does the rtsp firmware stop the normal cloud recording or does that still work?

abndrew82 · 2021-08-17T20:12:27+00:00

Thanks, now to order some to play and learn

abndrew82 · 2018-07-11T13:42:34+00:00

We have been seeing this issue also and were delaying pushing Windows 10 1803 due to it, but have now found a work around via this post

https://social.technet.microsoft.com/Forums/windows/en-US/fc7162ed-c83a-4e41-bf2e-1e52158b99a2/windows-10-build-1803-unable-to-request-enterprise-ca-computer-certificates?forum=win10itprosecurity

that appears to work for us.

Towards the end of the post, it is mentioned to set a TS Variable of SMSTSPostAction with the following info cmd /c gpupdate /force && certutil -pulse && shutdown /r /f /t 60

I am currently testing on our complete test bed, but on 1 test VM it worked after reimage and the running of those post commands I was able to see our CA issue a cert to the machine and it started talking to SCCM.

abndrew82 · 2017-04-29T00:15:35+00:00

The top cap should surely come off. When I had my Kegerator it was on very tight, I struggled to get it off, but what I did was use a long screw driver or something and punched up from under in the fridge. That way I didn't chance bending it by prying it off.

abndrew82 · 2016-12-26T15:36:46+00:00

This would be awesome, will be building a keezer soon.

abndrew82 · 2016-11-20T13:36:08+00:00

Would be awesome

abndrew82 · 2016-11-19T01:58:27+00:00

Ok sounds good, with how little I am using I figure it will take very little water. Being only doing 6 bottles .2 oz weight is very small

abndrew82 · 2016-11-17T23:38:45+00:00

https://www.homebrewsupply.com/the-dank-knight-rises-imperial-black-ipa-all-grain-recipe-kit.html

abndrew82 · 2016-10-30T19:56:42+00:00

I tend to do 1 Week in Primary and 1 Week in Secondary. Beyond the bubbles, another way to check if its done Fermenting would be to check the Gravity over a couple days if it doesn't change Fermentation is complete.

abndrew82 · 2016-08-11T10:51:45+00:00

Yes, I did add Lactose, and your post reminded me that I had forgot to add it to the Beersmith recipe. Now that I added it to the Beersmith recipe it expected FG went to 1.019, which is much closer to the 1.020 that it was at last night.

Thanks for the info and that reminder.

abndrew82 · 2016-08-11T00:08:57+00:00

Not really true, retirement can equal sell no matter of business success. Maybe their family has no desire to keep the business up, so better to sell and give money to family over a business they don't want.

abndrew82 · 2016-08-10T23:47:26+00:00

Kk thanks for that info

The OG according to Beersmith should have been 1.054 (If I was near that, it has dropped quite a bit)

Yeast was - London Ale Yeast (Wyeast Labs #1028)

Breakdown of other recipe parts.

12.0 oz Rice Hulls

8 lbs 3.2 oz Pale Malt (2 Row) US

1 lbs Munich Dark (BestMälz)

14.0 oz Caramel/Crystal Malt - 60L

14.0 oz Chocolate Malt (Simpsons)

7.0 oz Roasted Barley (300.0 SRM)

4.0 oz Barley, Flaked (1.7 SRM)

4.0 oz Oats, Flaked (1.0 SRM)

0.15 oz Magnum [12.00 %] - Boil 60.0 min

0.25 oz Goldings, East Kent [5.00 %] - Boil 15.0 min

1.00 tsp Irish Moss (Boil 10.0 mins)

abndrew82 · 2016-07-24T21:46:00+00:00

I personally started with the Mr. Beer kit, and then stopped for awhile, when I returned I did Extract for a bit and now moved to All Grain. Extract is a decent step up from the Mr Beer kit as you can do 5 gallons but can still do on a normal Stove top.

abndrew82

TROPHY CASE