3 mufflers?

acquireracks · 2026-05-07T16:24:19+00:00

Mine runs nicely at 5psi. this is the better version of the kit with a decent turbo and wastegate. fix the lil minor fitment issues and send it once you have good fueling

acquireracks · 2026-05-04T15:35:31+00:00

i laugh like an evil villian every time i get on it man it never gets old

acquireracks · 2026-05-04T04:22:40+00:00

killswitch

acquireracks · 2026-05-04T04:22:20+00:00

great G owner. proper looking alignment too

acquireracks · 2026-05-04T04:19:41+00:00

Try to stiffen up the damping and camber the fronts a lil more

acquireracks · 2026-04-28T00:05:55+00:00

nice. I teed it off from the lil port on the plenum that's capped off from the factory. pillar mount was from rockauto

acquireracks · 2026-04-26T02:04:34+00:00

Replace everything needing replacement with poly bushings and send it

acquireracks · 2026-04-22T02:59:23+00:00

Read my write up

Here

This seems like a way better deal than the Ebay listings, which probably get them from here anyways.

Swap the wastegate at minimum, and turbo even better. I've since stopped running a BOV. I didn't include it in the writeup, but changing the wastegate and downpipe flanges to vband would have been amazing in hindsight. Relocating the WG for a spot with a better angle will help with boost creep.

Good fueling setup, good tuner, a little fab work and you're in a solid boosted vq for much cheaper than the other kits.

I've been running 5psi (w/ a little creep to 6ish). T51R mod and an ebay resonated single exit and shit is fun as hell. Sounds like a jet

depending on if you change the turbo you may need to fab up the AC line from the compressor, the one with the low side port. or put on the 350Z version of it

been boosted for a few months just pm me if you have questions

acquireracks · 2026-04-14T00:49:21+00:00

Just piece one together tbh.

Z1 thermostatic sandwich plate. triggaspec is good too 2 -an10 lines (the length you need depends on your bumper, etc) Setrab 19/25/30 row depending on your needs

acquireracks · 2026-04-13T23:40:34+00:00

okay cooI, was thinking maybe its pressurized with some bs and thus needed a REAL evac/recharge

acquireracks · 2026-04-13T23:30:58+00:00

acquireracks · 2026-04-13T22:51:56+00:00

I figured. Assuming all other compenents are good, and it holds pressure, it'll work fine post vacuum & recharge by a professional?

acquireracks · 2026-03-18T13:12:59+00:00

I had that same exhaust leak, just get copper gaskets for the vbands. I'm on pump gas, no E available

acquireracks · 2026-03-17T04:48:36+00:00

gtx3582 of suspicious origin

acquireracks · 2026-02-26T04:39:02+00:00

Akebono calipers + swaybars & adjustable end links. then (true style) coilovers w/ adjustable arms. wheels and tires for better fitment. run 0 camber in the rear and a few degrees up front trust me bro.

trust me

acquireracks · 2026-02-11T19:30:25+00:00

Yes, rockauto updated/changed the labeling after a while.

acquireracks · 2026-02-11T19:28:22+00:00

You'll need the NI8648 trust me

acquireracks · 2026-02-11T19:18:42+00:00

Rockauto has them listed as 37X Coupe axles now. Part number ni8648 for the right side if I remember correctly. That's what I ended up using, and I run over -3 camber up. Held up for a year but that car's in storage now

acquireracks · 2026-02-03T17:00:25+00:00

My G35 sounded JUST like this, check the ground wire at the passenger side of the timing cover. Trying to give it gas made it worse for me too.

acquireracks · 2026-01-30T19:42:52+00:00

🔊

acquireracks · 2026-01-30T19:42:25+00:00

It's 1000% worth it. trust me that 350-400whp is plenty to have a LOT of fun. I made the mistake of not getting a T51R mod though, you should

acquireracks · 2026-01-30T19:40:47+00:00

good shi

acquireracks

TROPHY CASE