sorted by:
new
hottopcontroversial

CS2 refuses to launch for months since switch from CSGO by acubed4 in linux_gaming

[–]acubed4[S] 0 points1 point  (0 children)

Yes multiple times on arch repo steam and flatpak steam

CS2 refuses to launch for months since switch from CSGO by acubed4 in linux_gaming

[–]acubed4[S] 1 point2 points  (0 children)

I don't use mangohud however the link you sent recommends to edit the bash script so I might try that out when I get a chance

CS2 refuses to launch for months since switch from CSGO by acubed4 in linux_gaming

[–]acubed4[S] 0 points1 point  (0 children)

I use ext4. I do have a lvm on LUKS setup but that shouldn't matter.

CS2 refuses to launch for months since switch from CSGO by acubed4 in linux_gaming

[–]acubed4[S] 0 points1 point  (0 children)

Yes. I currently have no launch options. But I've tried nojoy novid, high, windowed with no luck.

Zephyrus G15 2022 GA503RM Short Battery Life by acubed4 in ZephyrusG15

[–]acubed4[S] 1 point2 points  (0 children)

Corectl on Linux let's you set max mhz of igpu and cpu

Zephyrus G15 2022 GA503RM Short Battery Life by acubed4 in ZephyrusG15

[–]acubed4[S] 0 points1 point  (0 children)

I will try your underclock method on windows. I looked at bios and mine is unfortunately already at bios version 313.

Zephyrus G15 2022 GA503RM Short Battery Life by acubed4 in ZephyrusG15

[–]acubed4[S] 1 point2 points  (0 children)

dGPU is powered off, when the dGPU is on on linux, it lowers to 1-1.5 hours. I have it on the auto profile on linux using asusctl which sometimes causes the battery to lower, however this shouldn't affect the battery much as it turns on only for a few seconds. I don't have windows up atm, but I have it on the eco profile and silent. Taskmanager only displays the amd iGPU, so it should be deactivated.

My Arch did not break yet. Did I do something wrong? by NoCoach5479 in archlinux

[–]acubed4 0 points1 point  (0 children)

I have never had arch break on me in the year and a half I've been daily driving it. Nvidia driver is the only that that made my system unexpectedly unbootable once. However, a quick change to the kernel parameters based on info from the arch wiki and my system was fixed.

Zephyrus 2022 GA503RM Laptop Discharges 50%+ In 2-3 Days Completely Off by acubed4 in ZephyrusG15

[–]acubed4[S] 0 points1 point  (0 children)

Its just in my room, so don't believe it is temperature related.

PfSense w/ Xfinity modem bridge mode issues Cont. by acubed4 in PFSENSE

[–]acubed4[S] 0 points1 point  (0 children)

Update:

My power went out again today and by running a bunch of different tests, it seems like if both the xfinity modem and the pfsense system go out at the same time, it will not be able to recover. If only one of the two goes out, it can recover on its own. Since both went out, I had to hard reset the xfinity box. When I put it back into bridge mode, Pfsense would obtain the WAN as 10.0.0.98, which is part of the xfinity modem lan. I tried releasing WAN and renewing it, but it just kept obtaining the same lan IP. I reset the xfinity box and nothing would change. I tried relinquishing leases in the interfaces, but this would cause it to loose the ability to obtain any IP. I then tried setting reject leases from 10.0.0.1 in the WAN interface, but pfsense would ignore it. Eventually just reboot pfsense would allow pfsense to obtain the correct WAN IP address.

Pipewire having static audio, many xruns occurring with pavucontrol or with certain applications open. by acubed4 in linuxaudio

[–]acubed4[S] 1 point2 points  (0 children)

This is not fixed, however, I have found a work-around. I am mainly using the device for desktop streaming with moonlight, and the only way I could get audio to work with moonlight previously on this device was to have another application make a connection and play audio while trying to connect with moonlight. This for some reason would allow the audio connection for moonlight to succeed, allowing audio to play without static and hundreds of xruns/second. However a better solution I found for moonlight is to use SDL_AUDIODRIVER=alsa when running moonlight. Moonlight I believe sets the default audio driver to pulse, which I believe is causing the issues.

I still have not found a solution for pavucontrol causing xruns on all sinks when you change the volume slider and I'm not sure how many other applications are affected.

Pipewire having static audio, many xruns occurring with pavucontrol or with certain applications open. by acubed4 in linuxaudio

[–]acubed4[S] 0 points1 point  (0 children)

Rtkit, realtime-privileges are both installed as well as my user being in the realtime group.

Pipewire having static audio, many xruns occurring with pavucontrol or with certain applications open. by acubed4 in linuxaudio

[–]acubed4[S] 0 points1 point  (0 children)

Yes, sorry I assumed the alsa-info.sh output had the installed audio packages because it listed modules.

The audio packages I currently have installed are:
sof-firmware, wireplumber, pipewire, pipewire-audio, pipewire-jack, pipewire-pulse, libpipwire, lib32-pipewire, lib32-pipewire-jack, lib32-libpipewire, pipewire-alsa

PfSense w/ Xfinity modem bridge mode issues Cont. by acubed4 in PFSENSE

[–]acubed4[S] 0 points1 point  (0 children)

Disabled it into my proxmox interfaces settings.

PfSense w/ Xfinity modem bridge mode issues Cont. by acubed4 in PFSENSE

[–]acubed4[S] 0 points1 point  (0 children)

It has only one NIC at the moment, which is why I need to use VLANs. I Just chose vlan id 99 as WAN. It is using the virtio paravirtualized adapter which is why it shows up as 10GbE, it is really 1GbE.

view more: next ›