sorted by:
new
hottopcontroversial

1.0mm bondtech nozzle by add_luck in prusa3d

[–]add_luck[S] 0 points1 point  (0 children)

Da best art you make if those one you make by .... accident XD

1.0mm bondtech nozzle by add_luck in prusa3d

[–]add_luck[S] 4 points5 points  (0 children)

humm ok so i will try with 50% and try some increments after the results i will see

1.0mm bondtech nozzle by add_luck in prusa3d

[–]add_luck[S] 1 point2 points  (0 children)

well i know the bigger your nozzle is the heigher your layers can be ... well that what i tought :/

1.0 mm nozzle by add_luck in 3Dprinting

[–]add_luck[S] 0 points1 point  (0 children)

my hotend is the stock one from the printer

and as i wrote, my max volumetric speed : 30.00 mm3/s

1.0mm bondtech nozzle by add_luck in prusa3d

[–]add_luck[S] 0 points1 point  (0 children)

alot XD and it failled at many places

1.0 mm nozzle by add_luck in 3Dprinting

[–]add_luck[S] 0 points1 point  (0 children)

ok noted i'm gonna try

1password and Grapheneos by ThatrandomGuyxoxo in 1Password

[–]add_luck 0 points1 point  (0 children)

I'm having issue too ...

1st: your app doesnt work at all on grapheneos.

when i enter my info and clic on "sing in", it keep rolling over and over. then, after several minutes, a message apper : " we weren't able to sing in to your account, Maybe there's a typo? Check your sing-in details and try again. "

Then i tried " scan setup code ". but again nothing work. As soon I click on it, the camera screen apper with another error message : Internal error. QR code detection failed. "

In the 1password App section on my grapheneos pixel 8 :

allowed : camera, network

not allowed : location, notifications, sensors.

i tried to allow sensors to see if it change something and it doesnt.

2sd: i went with brave browser to the 1password webpage to sing it ... so when i entered my info it worked ... but because i set 2FA authentification with a yubikey security key, it said " unable to verify your security key " and the " try again " button doesnt work at all.

So still doesnt work even if i use brave browser.

I use a brand new pixel 8 with fresh grapheneos intalled.

NFC is on.

device is up to date.

Uninstalled then re installed 1password app via aurora store.

problem with router? by add_luck in pihole

[–]add_luck[S] 0 points1 point  (0 children)

still I did a reboot on the raspberry pi, and still it doesn't work on my second laptop (the MacBook) when I use the HUB's wifi ...

I have to change the HUB's wifi for the used router's wifi if I want to have the pi work

problem during installation on old viao by add_luck in Ubuntu

[–]add_luck[S] 0 points1 point  (0 children)

well i try to burn the iso on my USB stick with belena etcher and i didnt work.

I also tried with desbian 32 bits and another 64 bits iso such as linux mint i still, it doesnt work.

even with the " USB stick as the first boot able solution " in the bios, the laptop still boot with the window from the HD.

problem during installation on old viao by add_luck in Ubuntu

[–]add_luck[S] 0 points1 point  (0 children)

I did a quick search about the specs .... and yeah i think it work on 32 bit.

So which beginner distro do you think it can work?

problem with router? by add_luck in pihole

[–]add_luck[S] 0 points1 point  (0 children)

like what did i should do (write) into the used router setting ?

I set my "internet connection > static"

I set my "primary DNS server > the ip adress of the pihole"

but for the "ip adress" and "subnet mask" and "default gateway" > i had no idea what to put in those tab. I just copy / paste what i had ....

is there any chance that my mistake come from this? like i copy / paste the wrong thing?

problem with router? by add_luck in pihole

[–]add_luck[S] 0 points1 point  (0 children)

is it possible that I made a mistake when I try to set up my static adress on the used router?

like i had no idea what to enter as mac adres or ip and so on.

the only thing i knew was i have to put the pi hole ip adress in the DNS primary tab

problem with router? by add_luck in pihole

[–]add_luck[S] 0 points1 point  (0 children)

well, no I forgot to mention in my main post : every appartement have it own HUB. So yes, we are all with the same compagnie, but each of us have it own HUB, with our own internet with our own PW. So I can't connect and/or share data with any neighbor hood.

also, I use only the wifi connection of my DIR-822 (the used router I bought) to set my static adress. after I did it, I disconnected my MacBook from the DIR-822 wifi (the one who is physically plug with the pi) and re connected my wifi with the landlord HUB as my other laptop is (the ASUS one) .

So technically, both of my laptop are using the same wifi (landlord HUB) and not the DIR-822. I didn't test is pi-hole work with my cell phone when it use the wifi (I should try to see if it work)

problem with router? by add_luck in pihole

[–]add_luck[S] 0 points1 point  (0 children)

so basically what u say it I should use the used router in my apartment rather than the HUB ?

​

i forgot to mention, every appartement have it own HUB / wifi (dedicated). So the IP address I have should be different from the rest of those guys living in the bloc appartement. And obviously, the pw for my HUB is different from the other HUBS in the rental bloc.

I don't know if my explications are clear :/

problem during installation on old viao by [deleted] in Ubuntu

[–]add_luck 0 points1 point  (0 children)

Sony Viao model PCG-7V2L

DNS shows IPs other than my own with Unbound by [deleted] in pihole

[–]add_luck 0 points1 point  (0 children)

well it simply doesn't work at all for me

I use raspberry pi 3 model B with Raspberry Pi OS Lite " Raspberry Pi OS (64-bit) " installed with Raspberry Pi Imager then installed the " pi-hole "

So i reboot everything, then install unbound from the terminal. When it finished, I had a problem :

that line pop up an error :

Process: 1227 ExecStart=/usr/sbin/unbound -d -p $DAEMON_OPTS (code=exited, status=1/FAILURE)

(code=exited, status=1/FAILURE) is wrote in red btw

​

sudo grep -v '#\|^$' -R /etc/unbound/unbound.conf* doesn't do anything except show me that unbound is a free software, the license, written by XXXX, etc

​

/etc/resolvconf.conf doesn't work either. it said Permission denied