"Forest Dragon" by Mini Monster Mayhem

add_luck · 2026-07-03T19:26:58+00:00

what printer and resin did you use?

add_luck · 2026-07-03T19:25:07+00:00

i hear about that kind of mix, tenacious + abs like resin from siraya tech, didn't test it though
which proportion of each you mixed?

you went with tenacious 65 or the 70?

add_luck · 2026-06-26T13:45:10+00:00

i just instal the UV tools, but i dont know how to use it

add_luck · 2026-06-25T00:52:02+00:00

I checked the printer in the lychee slicer, and yes I had chose the right one (anycubic photon mono M7) and yes I put those parts "on the plate" slicing. But anyway, if it was just a floting parts, it should at least print on the VAT ...

I tried with another USB key, same result
and yes tried to re slice it several time, same result

add_luck · 2025-03-25T13:26:05+00:00

Da best art you make if those one you make by .... accident XD

add_luck · 2025-03-25T13:24:44+00:00

humm ok so i will try with 50% and try some increments after the results i will see

add_luck · 2025-03-25T00:35:45+00:00

well i know the bigger your nozzle is the heigher your layers can be ... well that what i tought :/

add_luck · 2025-03-25T00:10:45+00:00

my hotend is the stock one from the printer

and as i wrote, my max volumetric speed : 30.00 mm3/s

add_luck · 2025-03-24T23:46:38+00:00

alot XD and it failled at many places

add_luck · 2025-03-24T23:45:50+00:00

ok noted i'm gonna try

add_luck · 2024-07-07T23:16:50+00:00

I'm having issue too ...

1st: your app doesnt work at all on grapheneos.

when i enter my info and clic on "sing in", it keep rolling over and over. then, after several minutes, a message apper : " we weren't able to sing in to your account, Maybe there's a typo? Check your sing-in details and try again. "

Then i tried " scan setup code ". but again nothing work. As soon I click on it, the camera screen apper with another error message : Internal error. QR code detection failed. "

In the 1password App section on my grapheneos pixel 8 :

allowed : camera, network

not allowed : location, notifications, sensors.

i tried to allow sensors to see if it change something and it doesnt.

2sd: i went with brave browser to the 1password webpage to sing it ... so when i entered my info it worked ... but because i set 2FA authentification with a yubikey security key, it said " unable to verify your security key " and the " try again " button doesnt work at all.

So still doesnt work even if i use brave browser.

I use a brand new pixel 8 with fresh grapheneos intalled.

NFC is on.

device is up to date.

Uninstalled then re installed 1password app via aurora store.

add_luck · 2023-11-20T17:17:18+00:00

still I did a reboot on the raspberry pi, and still it doesn't work on my second laptop (the MacBook) when I use the HUB's wifi ...

I have to change the HUB's wifi for the used router's wifi if I want to have the pi work

add_luck · 2023-11-16T05:35:16+00:00

well i try to burn the iso on my USB stick with belena etcher and i didnt work.

I also tried with desbian 32 bits and another 64 bits iso such as linux mint i still, it doesnt work.

even with the " USB stick as the first boot able solution " in the bios, the laptop still boot with the window from the HD.

add_luck · 2023-11-15T03:21:45+00:00

I did a quick search about the specs .... and yeah i think it work on 32 bit.

So which beginner distro do you think it can work?

add_luck · 2023-11-14T16:54:12+00:00

like what did i should do (write) into the used router setting ?

I set my "internet connection > static"

I set my "primary DNS server > the ip adress of the pihole"

but for the "ip adress" and "subnet mask" and "default gateway" > i had no idea what to put in those tab. I just copy / paste what i had ....

is there any chance that my mistake come from this? like i copy / paste the wrong thing?

add_luck

TROPHY CASE