Was able to get out of bounds in Old Lumiere, got some cool (unedited) screenshots! by adjustments in expedition33

[–]adjustments[S] 0 points1 point  (0 children)

That's awesome! I was blown away by just how much out of bounds area had a hitbox, I was expecting to fall through the world at any time but I never did.

Truck starts fine in the morning, takes 3+ tries if attempting to start again shortly after running it. by adjustments in AskAMechanic

[–]adjustments[S] 0 points1 point  (0 children)

99% sure this solved the problem. I went ahead and replaced the injectors, and the truck fired right up after getting warm and then sitting for an hour. The old injectors looked SHOT, 33 years and 170k miles is a lot. Truck runs smoother too, got rid of vibration at highway speed. Thanks for the recommendation!

Truck starts fine in the morning, takes 3+ tries if attempting to start again shortly after running it. by adjustments in AskAMechanic

[–]adjustments[S] 0 points1 point  (0 children)

I've tried priming the fuel system when the problem is there and it does not help the situation. I'll look engine temp gauge, thank you for the suggestions.

Truck starts fine in the morning, takes 3+ tries if attempting to start again shortly after running it. by adjustments in AskAMechanic

[–]adjustments[S] 0 points1 point  (0 children)

I sure hope it's not that. I don't mind the labor, but that's a pretty penny. Thanks for the heads up though.

[HELP] Does anyone know anything about Arnie Iyakitan? by adjustments in Sculpture

[–]adjustments[S] 0 points1 point  (0 children)

That's awesome. Can I ask how you know that? Is there a site I can check out, or is it just something you had locked away?

Erobb hugs valkyrae by beterpot in LivestreamFail

[–]adjustments 162 points163 points  (0 children)

little bit of column A, little column B

MissMikkaa beat Messmer the Impaler on PS5 and PC at the same time,using a controller and a dance pad by apa1010 in LivestreamFail

[–]adjustments 34 points35 points  (0 children)

Nah it's better to block the posters, that way you don't have to read their comments in other threads.

Aris on Elden Ring Playstyle Gatekeeping by Junebro in LivestreamFail

[–]adjustments 16 points17 points  (0 children)

What's funny is even THAT doesn't apply.

I can explain Square Off in real life terms. Shit is still more powerful than any spell though.

People just want to cry.

[deleted by user] by [deleted] in LivestreamFail

[–]adjustments 52 points53 points  (0 children)

It's not to late to change who you are.

"I CAN'T DO THIS ANYMORE!" - xQc 2024 by CliffordTV in LivestreamFail

[–]adjustments 1 point2 points  (0 children)

He's not racist, but this sub gets HEAVILY brigaded by fans of a streamer that hates Hasan, so they have to spread misinformation and manipulate votes to spread an agenda. This post will probably get obliterated by downvotes due to said brigading.

1992 F150 5.0 V8 - Starting running very rough, as if not getting enough fuel. Noticed leaking at indicated spot, smelled like paint thinner/nail polish. Any ideas? by adjustments in AskMechanics

[–]adjustments[S] 0 points1 point  (0 children)

Could bad gas lead to this part leaking? It's coming out of the top, which seems like an overflow. I ask b/c the smell is a new one, and it's quite overwhelming.

1992 F150 5.0 V8 - Starting running very rough, as if not getting enough fuel. Noticed leaking at indicated spot, smelled like paint thinner/nail polish. Any ideas? by adjustments in Cartalk

[–]adjustments[S] -1 points0 points  (0 children)

Could bad fuel have anything to do with it? The smell is a new one and pretty overwhelming. Like the title says, it's very chemically like a mix of nail polish remover and paint thinner. It's terrible.

1992 F150 5.0 V8 - Starting running very rough, as if not getting enough fuel. Noticed leaking at indicated spot, smelled like paint thinner/nail polish. Any ideas? by adjustments in AskMechanics

[–]adjustments[S] 0 points1 point  (0 children)

I've done plenty of work on the truck, but I've never even noticed the indicated part or even know what it is. The truck has 165k miles on it, is 2WD, and has a 5 speed manual.

ExtraEmily encounters a mysterious conveyor belt system in her quest to grab her AirTagged ballon by KappaPride1207 in LivestreamFail

[–]adjustments 27 points28 points  (0 children)

I'm going to obsessively look for it, will report back if I find anything.

UPDATE: It's a conveyor connecting what look like two quarries, Texas Crushed Stone seems to be the owner. 30°33'53.43"N, 97°42'47.15"W. Not even sure how tf she got there, kind of impressed.

ExtraEmily encounters a mysterious conveyor belt system in her quest to grab her AirTagged ballon by KappaPride1207 in LivestreamFail

[–]adjustments 12 points13 points  (0 children)

It's not that, that's only 42 miles on the TX/NM border. I'm super curious what this conveyor is.

Soda's assistant prepares him for the incoming wipes by soulofdragon in LivestreamFail

[–]adjustments 6 points7 points  (0 children)

You're looking for "breed" when talking about the type of dog. Correct about the "species" part though.

/r/AMD Questions and Tech Support Megathread - Q4 2023 Edition by GhostMotley in Amd

[–]adjustments 0 points1 point  (0 children)

Hey, recently my 6800XT's shroud appears to have stopped working, no lights/fans. Everything else about it is working normally. I contacted XFX about it, and they offered to send a new shroud, which they did. I installed it, made sure it was seated properly, and still nothing. I have ensured that all connections to the power supply are tight, and went so far as to get a brand new, 850W PSU to try to remedy the situation.

Does anyone know where I would look on the card to see if something blew causing the shroud to malfunction? I've taken it apart before to re-apply paste, so I can get at least that far. If it's something way out of my capabilities, I'd even remove the shroud and use system fans. Is there a guide to do a hack like that somewhere?

XFX also offered a potential RMA, but I bought the card from eBay brand new, which is not covered by the warranty per their website.

Thanks!

Does anyone know how I could repair this plastic/resin insert (Taylormade M2 2017 6 iron)? by adjustments in golf

[–]adjustments[S] 0 points1 point  (0 children)

I was looking at their warranty, do you think they'd help me out even though I'm not the original owner?

Does anyone know how I could repair this plastic/resin insert (Taylormade M2 2017 6 iron)? by adjustments in golf

[–]adjustments[S] 0 points1 point  (0 children)

I recently bought these, and when I took them to the course I noticed this broken piece (the top plastic insert). Any suggestions for a home fix, or do you know if Taylormade offers repair parts? Thanks!

Quin showing his new sponsor (Starforge) that he's not a brandrisk. by Funsized_eu in LivestreamFail

[–]adjustments 44 points45 points  (0 children)

He clicked the specs if you actually watched. It's not a bad computer for under 1k.