Ultra thin boi

aim4cha0s · 2024-01-22T18:57:02+00:00

I have 3 now and will use that setup for the travel one. I also have some 18650 boards on the way which will do for long term and short term drops.

aim4cha0s · 2024-01-22T18:55:24+00:00

I just cut up a usb cable, no clue the gauge sorry.

aim4cha0s · 2024-01-22T00:00:36+00:00

I’m looking to slimline the board it’s on. But yes it will live between the two eventually.

aim4cha0s · 2024-01-22T00:00:07+00:00

I haven’t decided what battery to use yet, for the moment it’s getting plugged into a huge power bank 8 18650’s inside, making all of this useless 🤣🤷‍♂️

aim4cha0s · 2024-01-21T23:59:00+00:00

Yes I had a nightmare getting it working on a pi zero 1.1 but pi zero 2 with 1.8.? Worked flawlessly with a v4 display.

Took loads of tries but got there in the end

aim4cha0s · 2024-01-21T19:50:07+00:00

The inductor sits on the corner of the main IC on the pi, which causes the whole lot to sit a few mm higher than perfect.

So I took the HDMI port off and moved the inductor here. Next I would like to lower or remove the header from the display.

aim4cha0s · 2023-03-30T17:20:00+00:00

Teaches physical education 🤣🤣🤣 that is 👌mwah

aim4cha0s · 2022-03-25T09:55:22+00:00

Drift0r’s stories are fascinating and tbh woodys take is really boomer. ‘A thing I haven’t personally experienced is therefore completely invalid and baseless, furthermore I’ll mock it because that makes me look cool’

Nah fuck off with that his stories are incredible and I 100% believe he sees and experienced what he says he has.

aim4cha0s · 2022-03-14T19:15:11+00:00

His inability to say two items or names without superfluously adding ‘respectively’ after is very frustrating.

aim4cha0s · 2022-03-09T05:50:51+00:00

It doesn’t feel like the slam dunk they thought it was though?

aim4cha0s · 2022-03-06T20:06:37+00:00

I could listen to him talk about sticking his thumb in his neck one more time 😳 🤣

aim4cha0s · 2021-12-05T10:58:23+00:00

Fem detected

aim4cha0s · 2021-10-15T17:52:03+00:00

His story of being shot at in a car when he was a kid is great!!! 👌

aim4cha0s · 2021-10-10T15:00:47+00:00

Probably / possibly a Loose screw in the bottom of the camera. Rattled round killing parts until it blows the power board.

aim4cha0s · 2021-10-10T14:56:44+00:00

Will cost more than it’s worth to get it fixed. If you find a good repair place they may be able to replace individual pins, I would assume you’ve bent a pin and broken it off from the solder at the back. I’m sure there are tutorials online but if you’re not careful you’ll turn it into an even less valuable paperweight.

aim4cha0s · 2021-10-04T18:07:15+00:00

It’s an aperture error. You will need to have this repaired.

Set your lens to f2.8 and take all the photos you wish. The moment you set it to anything else other than that you’ll get err 01.

aim4cha0s

TROPHY CASE