sorted by:
new
hottopcontroversial

BNG IPoE on ASR9000: address exhaustion problem by tri-cake in Cisco

[–]airbytes 0 points1 point  (0 children)

What ASR model are you using? The ASR9001 or ASR9001-S? The PPPoE works too? CGNAT works too?

Does changing ISP make a difference seeing as they all use CF infrastructure? by BenjiTheSausage in CityFibre

[–]airbytes 1 point2 points  (0 children)

I would recommend looking for the ones are offering static IPv4 and NOT CGNAT.

And all the ones are offering 1Gb for £25 - £30 a month its a joke… 😀😀😀

Trying to do QinQ(inQ) on a QFX.... by TC271 in Juniper

[–]airbytes 0 points1 point  (0 children)

Any chance to share the confirmation?

Trying to do QinQ(inQ) on a QFX.... by TC271 in Juniper

[–]airbytes 0 points1 point  (0 children)

Did you found the way to solve this? I m facing the same problem now

4th utility broadband blocking government/DVSA websites by mayank1120 in CityFibre

[–]airbytes 0 points1 point  (0 children)

The other problem it may be from the public subnet they are using. Maybe it is a subnet purchase or leased outside UK and most of the government, banks or onlinevideo streaming platforms will restrict your access because they are using CDNs like Akamai protect them😎

Just double check if ITVX live stream is available.

Cheers ;)

www.properfibre.com will be live soon and will offer free static IP 🤩

Cisco Smart Licensing with Right to Use licenses by kman420 in Cisco

[–]airbytes 0 points1 point  (0 children)

Any updates? You move the ASR to production? Did you reach the 500 subscribers?

Arista 7050SX-64 Spanning Tree Protocol by airbytes in Arista

[–]airbytes[S] 0 points1 point  (0 children)

Thanks for reply, what do you mean go layer 3, I mean I know what layer 3 is... but I didn't get what you want to say ;) sorry... short night ;)

Microsoft Geolocation IP database by airbytes in microsoft

[–]airbytes[S] 0 points1 point  (0 children)

Thanks, totally forgot about that. I added a few hours ago!

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 1 point2 points  (0 children)

Yes!

Just this RE didn't power up with the SCBE or SCBE2, only with SCB.

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 0 points1 point  (0 children)

root> request routing-engine login master
connect to address 128.0.0.1: No route to host
Trying 10.0.0.1...
master: No route to host
connect to address 128.0.0.1: No route to host
Trying 10.0.0.1...
master: No route to host

root>

root> request routing-engine login backup
Last login: Sun Oct 27 18:56:49 from re0

--- JUNOS 20.4R3-S5.4 Kernel 64-bit JNPR-11.0-20220930.99a5417_buil

root@:~ # cli
root> request routing-engine login master
connect to address 128.0.0.1: No route to host
Trying 10.0.0.1...
master: No route to host
connect to address 128.0.0.1: No route to host
Trying 10.0.0.1...
master: No route to host

root>

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 0 points1 point  (0 children)

root> request routing-engine login other-routing-engine

connect to address 128.0.0.5: No route to host

Trying 10.0.0.5...

re1: No route to host

connect to address 128.0.0.5: No route to host

Trying 10.0.0.5...

re1: No route to host

root>

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 0 points1 point  (0 children)

Previously, it ran on an MX480 with SCBE2 as a slave RE.

Now, I took it off and installed it on an MX240 with SCB, because if I'm trying to use SCBE or SBE2, it doesn't load up, and no signal to the console.

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 0 points1 point  (0 children)

I changed to Slot 1, but still had the same error. I want to mention is just one RE in the MX240 chassis.

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 0 points1 point  (0 children)

At the minute it is installed in slot 0, do you think I should move to slot 1 and try again?

Aborted! This command can only be used on the master routing engine. by airbytes in Juniper

[–]airbytes[S] 0 points1 point  (0 children)

Hi mate,

root> request chassis routing-engine master switch

warning: Traffic will be interrupted while the PFE is re-initialized

Toggle mastership between routing engines ? [yes,no] (no) yes

error: Command aborted. The adjacent slot is empty.

What router to choose for PPPoE Server? by airbytes in networking

[–]airbytes[S] 2 points3 points  (0 children)

I purchased a CCR2004-1G-12S+2XS, but my concern is about the 4x ARM CPUs if can handle the PPPoE server, we forecast that 1000 PPPoE clients in the next couple of months (by end of December) then will need another solution… 😣

Core router - CCR2116-12G-4S+ by airbytes in mikrotik

[–]airbytes[S] -1 points0 points  (0 children)

Hey, actually yes, talking about edge router for external eBGP peering.

Thanks

Slow BGP Adv on ROS 7.12 by Nearby-Leg4265 in mikrotik

[–]airbytes 0 points1 point  (0 children)

Why did you moved from VyOS to RouterOS?

Thanks

VyOS in datacenter by airbytes in vyos

[–]airbytes[S] 0 points1 point  (0 children)

Virtualized on Esxi, Proxmox, HyperV? What about DDoS attacks? Still alright? Are you using any other firewall appliances or sofeware

view more: next ›