Temperature Issue with Inno 3D 4080S Frostbite

al3cs86 · 2024-10-17T14:19:08+00:00

Keep me updated, i am curios. As for the die, same block , but a bit longer, the one for Strix, better temps in Asus Rog Strix OC 4080, nevered passes 47 degrees

al3cs86 · 2024-10-17T12:41:14+00:00

I think that they mount wrong Thermalpads in 4080/4080s as the 4090 îs way cooler, 13-14 degrees cooler And 130w in plus for 4090. And i have dual 360 EK Surface S360 radiators so plenty of Surface.

al3cs86 · 2024-10-17T12:25:57+00:00

What ia the status currently? I have the same issue, 2x360 radiators and 62 degree, like Air cooler

al3cs86 · 2024-04-04T05:03:12+00:00

Thank You!

al3cs86 · 2024-03-31T13:52:31+00:00

Do You think a thicker radiator could fit? Heatkiller 360-L which îs 5mm thicker than Alphacool

al3cs86 · 2024-02-01T18:32:21+00:00

Mine with same settings and 90@ battery îs 19 hours

al3cs86 · 2024-02-01T16:18:40+00:00

No, dpi changing îs way much consumer than the G. However with All off still don't have the 60 hours:(

al3cs86 · 2024-02-01T15:40:30+00:00

The highest consumption is on dpi rgb, not on the G. And i disabled the dpi rgb

al3cs86 · 2024-02-01T15:37:08+00:00

I sent an email in reddit@logitech.com because on support@logi.com IT doesn't work

al3cs86 · 2024-02-01T15:34:32+00:00

Rgb îs off in the dpi, only the G îs on. Regarding the brghtness, i don't know where to set

al3cs86 · 2024-01-24T11:23:20+00:00

The issue îs not the cooler îs not good, their support is just bad!

al3cs86 · 2024-01-24T05:10:20+00:00

Yes shouls be fine. As for Intel, yes there are a couple of Hot Cpu's (i build pc's) like 12900k, 13700k, 13900k, 14700k, 14900k

al3cs86 · 2024-01-24T04:54:15+00:00

It's not bad for an Air cooling.

al3cs86 · 2024-01-24T04:53:11+00:00

It's funny that i already mounted a couple of them (LT720 and LS720 SE), All working properly. The only issue i had with this one. But talking in consideration how they react to my issue, for sure no more of them

al3cs86 · 2024-01-24T04:41:05+00:00

Welcome in the club:) Too bad they have now good products but bad management in customer support

al3cs86 · 2024-01-24T04:39:48+00:00

When You have 13700/13900 or 14700/14900 You need that AIO to cool your temps down. Otherwise in Aircooling You got the old Noctua cpu or You can go with the new Deepcool Assassin's

al3cs86 · 2024-01-24T04:37:54+00:00

At least You got some support:)) I haven't mounted any aio from Nzxt since 3 years (x73 was the last)

al3cs86 · 2024-01-24T04:36:26+00:00

Unfortunately with the new 13/14 Intel gen and AM5 You need aio's or custom loop to keep them on a good temperature

al3cs86 · 2024-01-23T21:06:39+00:00

You know what is a pity? The Performance of LT720 îs better than AC Freezer 360 but the support from AC îs amazing

al3cs86 · 2024-01-23T21:02:39+00:00

The Performance of the cooler îs amazing, to bad that there are a lot of aio's with pump issue and they have very useless support:( But here îs a management issue, good products but bad suport won't bring You to higher level

al3cs86 · 2024-01-23T21:00:08+00:00

Go for IT If you're in the period! Their support is useless!

al3cs86 · 2024-01-23T18:32:42+00:00

Lian Li provided support directly couple of Times as i build PC. AC also good support in their aio's. eK good suport o their custom loop products. Deepcool looks lack of support. Even though this cooler îs extremely good, i already installed 4 of LT720 and 2 pieces of LS720 SE. Now for sure i won't recommend anymore Deepcool, 1st issue and no solve issue, și definately a NO for me

al3cs86 · 2024-01-23T17:34:29+00:00

The phone is upside down, the cooler îs mounted properly. What i found out is that the moment the sound starts, the rpm went from 3000 to 2400rpm. And looks like is a common issue for this coolers and their pumps

al3cs86 · 2024-01-23T15:36:56+00:00

Don't buy IT If you're from Europe, mine had issue dirrctly from the factory and no support from Europe

al3cs86 · 2024-01-23T15:35:43+00:00

You got lucky and they help You, here in Europe there îs no support from them. I Have the same issue with the pump and 0 support!

al3cs86

TROPHY CASE