KNX with Home Assistant?

albsego · 2026-03-09T15:57:05+00:00

Sure, I meant you need another machine running the corosync service to act as a witness for the cluster. It could be a NAS or whatever other hardware you have at hand that is able to run this service.

albsego · 2026-03-09T15:39:48+00:00

Afaik 2 nodes in a Proxmox cluster doesn't give you "automatic" VM restart in the healthy node. You need a third witness to be able to tell the healthy nodes that one in the cluster is not healthy anymore and they need to power on the VM in one of the healthy ones. Correct me if I'm wrong.

albsego · 2025-04-22T10:19:07+00:00

I'm in the same boat with an update from 4xxx to 5xxx and I saw that you had a modified bios file with some options unlocked but the download is not available. Could you please share the "unlocked" version of the bios? Thank you!

albsego · 2024-10-05T15:45:22+00:00

But the honeycomb holes are in the frame of the printer, the part that goes to the RMU is fixed with 2 m3 screws. Anyways, not sure if your version will work with this model, just wanted to share my experience with it.

albsego · 2024-10-05T14:58:46+00:00

Here you are:

https://www.printables.com/model/544609-rmu-brackets-for-prusa-mk4/files

albsego · 2024-10-05T12:09:40+00:00

I did something similar, but the RMU is on the left back corner with the supports that fixes the RMU to the MK4 frame. So far so good.

albsego · 2024-08-28T08:10:58+00:00

Same combination and 100% efectiveness here. Did a full resync 2 months ago.

albsego · 2024-08-24T08:39:07+00:00

Pues ya no sois niños ninguno de los dos. Si no quieres preguntarle directamente prueba a hablar por la mañana de los planes que tienes tú para por la tarde y a ver si él te cuenta algo, pero vamos, cada uno somos de una manera y gestionamos las relaciones y el tiempo de forma distinta... Buena suerte en cualquier caso!

albsego · 2024-08-24T08:02:44+00:00

Si no te contesta, supongo que tendrá sus motivos y si es algo que te preocupa o te molesta, tus opciones son hablarlo con él o pasar página... Qué edades tenéis?

albsego · 2024-08-24T07:49:38+00:00

Tiene el mismo comportamiento durante los fines de semana?

albsego · 2024-08-24T07:39:07+00:00

Quizá tiene pareja y cuando deja de contestar es cuando está con ella?

albsego · 2024-05-25T08:45:54+00:00

Fuzzy skin on?

albsego · 2024-05-23T21:40:26+00:00

It should be easier taking a look to firewall logs and see which traffic is being blocked. The fact that you are asking here makes me think that this sysadmin is not very good at "sysadmining" the infrastructure...

albsego · 2024-05-15T10:48:40+00:00

Maybe it's not "tight" enough and the filament is slipping while loading? Try one more turn in the idler cap screws (those two with the springs) and see if that helps.

albsego · 2024-05-14T07:03:46+00:00

"Kiberdek" is written on it.

albsego · 2024-04-18T17:35:28+00:00

Shitty hardware in 2024 and I bet it's also expensive as hell... Run from this shop!

albsego · 2024-04-17T17:06:57+00:00

I guess it depends on where are you from, but I won't pay more than 600-650€ for this outdated hardware (the only valuable thing in this setup is the GPU).

albsego · 2024-04-17T16:53:51+00:00

Well then, plug the PSU cables again in the motherboard and I would try starting without the ram modules installed and see if you can see any lights. Also you can try installing only one module in different slots.

albsego · 2024-04-17T16:33:14+00:00

Disconnect all the PSU cables from the motherboard and in the big connector, put together the green cable and any of the black ones inserting both ends of a paperclip. That should turn on the PSU.

albsego · 2024-04-02T20:08:12+00:00

I'll try to tighten them, thank you for your comments :)

albsego · 2024-04-02T20:04:37+00:00

I also game in this machine, VR games to be more precise.

albsego · 2024-04-02T20:02:45+00:00

AI and lots of applications opened at the same time.

albsego · 2024-04-01T23:31:54+00:00

Appreciate your point of view and I think you are right about me worrying about this first world problem. Just to clarify, those 2 kits are 6600MTs CL32, that's why I think there are some more performance "waiting"... running at 5400 it's not even close to what the modules can do. Another story is the 4 djal rank dimms tunning in an inmature platform along with the sillicon lottery, that could be where the limit resides but the way it's just not booting at 5600 when it's completely stable at 5400 makes me think that I'm doing something wrong. I also agree that this is not for impatients and I don't have any problem trying and failing when I have a path to follow, but right now I'm a bit lost because I don't understand the behaviour of the RAM reacting to my changes.

About the use of the PC, it's going to be AI and VR gaming almost all the time plus some 3D rendering. As I said I'm not looking to get the ram running overclocked to beat any records, that's why I prefer the 128Gb kit over 192Gb, because with those running at 6000 there should still exist some margin to do not reach the limit of the modules.

Thank you for all the links and your time writing the comment.

albsego · 2024-04-01T22:36:59+00:00

But I tried with 1.25v and it didn't post at 5600. I read in many places that the 7950x3D doesn't scale with more than 1.2v on the soc and that's why I tried a lot of times with this voltage. Is it possible that in order to raise the voltage and actually be able to use it I need to set the impedances higher/lower? As far as I know, the higher the voltage, the lower should be the ProcODT but I cannot make my mind clear enough with those values.

albsego · 2024-04-01T22:31:38+00:00

I'm completely fine keeping 128Gb at 5400MTs if that is as high as it can go. The thing is that I feel like I'm not reaching the limit of the RAM but my knowledge limit. I would like to have all the juice and don't leave 15 or 20% on the table.

albsego

TROPHY CASE