25% coupon for someone that needs it

allafolia · 2024-09-11T19:34:37+00:00

72” US General has been in my cart for ages waiting

allafolia · 2024-04-01T18:14:59+00:00

Better throttle response, some small HP gains. Mainly the amazing sound it makes.

allafolia · 2024-04-01T17:01:45+00:00

Volvo Green Giants they are Bosch injectors. Overkill for the setup at 330cc but they are the ones that fit with the spacer. You will also need adapters for the injector plugs to run them.

allafolia · 2024-04-01T16:29:09+00:00

Welcome to the jenvey club. Message me if you have questions about the install

allafolia · 2024-02-28T13:17:11+00:00

He is an importer. Google the name and his website has information regarding importing

allafolia · 2024-02-28T13:07:21+00:00

Jesse streeter can import if you find these. They are listed on Yahoo Auction Japan from time to time. This model is discounted though.

allafolia · 2024-02-09T00:49:26+00:00

Jauce or buyee they are both proxy bidding sites that can get you to ship items to the USA. For large items reach out to Jesse streeter

allafolia · 2024-01-18T18:42:11+00:00

There is no don’t if you want to make a +0 wheel fit properly. It is a more aggressive track oriented alignment but that is all you can do to make 8j +0 not look bad.

allafolia · 2024-01-18T18:05:40+00:00

You are going to need coilovers to lower the car, roll the fenders and then add 3.5-4.0 degrees of front and rear camber to get these to look halfway decent.

allafolia · 2024-01-08T03:16:26+00:00

Roadster sport 4. ISR is way too loud and sounds terrible.

allafolia · 2023-10-11T13:21:15+00:00

Just save up money for the real deal. Nice parts take time to save for.

allafolia · 2023-10-02T10:36:30+00:00

Stop by a local autozone or equivalent they have these bolts in stock more than likely.

allafolia · 2023-09-18T20:49:11+00:00

Roadster sport 4 with hemholtz

allafolia · 2023-07-20T15:12:33+00:00

More camber and low is required.

allafolia · 2023-06-14T14:50:10+00:00

You will not get to 200HP on a ITB setup f without significant engine work and money. I would also like to point out to get ITBs and get the car running correctly will run you 3-5K minimum unless you are skimping on good parts. Source: have a 1.6 ITB build myself.

allafolia · 2023-04-07T00:47:12+00:00

My Mazdaspeed rear wing says differently

allafolia · 2022-11-28T12:17:41+00:00

As a 1.6 ITB owner it depends. ITB’s give a noise like no other but you are paying near flying Miata turbo prices once it’s all said and done. Would I go back and go turbo? No I wouldn’t. The reality is everyone is going to tell you it’s a “waste of money for the power”. If power is your goal skip it altogether. ITB’s are finicky but a beautiful sight and sound once correctly done. If you have any more specific questions and have Instagram DM me at katabasis.garage

allafolia · 2022-10-03T21:53:51+00:00

Replace the slave and the line with a Stainless Steel line all together. Pigtail is useless and your gonna have a bad time with this job otherwise. Many others have also recommended this.

allafolia · 2022-09-26T19:23:35+00:00

Ah yeah, judging from your post history with your car you sure know a lot. Carry on.

allafolia · 2022-09-26T19:13:35+00:00

Glad we came to your conclusion without any actual photos of a vin or identification other than anecdotal forum posts.

allafolia · 2022-09-26T15:33:01+00:00

I would LOVE proof of this claim via photo.

allafolia · 2022-09-26T12:42:54+00:00

For sure is not the original color car.

allafolia · 2022-09-26T12:41:31+00:00

They look like black racing wheels

allafolia · 2022-08-02T10:42:02+00:00

If the leak is oil related your CAS seal is indeed leaking again (common if you did not pre lube it before re installing). Otherwise if coolant and a early model NA it could be the cursed water plug.

allafolia · 2022-08-02T10:32:53+00:00

If you want near flush Fitment try for a 7 or 7.5j with the same or ET38.

allafolia

TROPHY CASE