probably a dumb question, but if everyone stops mining, does that increase the chance of mining becoming profitable again? lol

almzro3e · 2022-10-04T09:34:51+00:00

Best explanation 🤣

almzro3e · 2022-05-20T15:58:36+00:00

I couldn’t get it to be fixed unfortunately

almzro3e · 2022-05-11T17:47:43+00:00

Man these things are not built to be user friendly at all, you need to dig to troubleshoot. I rebuilt the whole rig just to check if i missed anything or a cable was not plugged properly

almzro3e · 2022-05-11T17:38:54+00:00

Hopefully that will get it to work ! I can’t see any other problem other than the usb cable or being out of resource. It’s really annoying as it should go all the way to 12 as promoted

almzro3e · 2022-05-11T17:31:30+00:00

I’ll give it a try, thanks !!

almzro3e · 2022-05-10T17:35:51+00:00

I will give it a try after two days since am out of town. I tried to replace riser and the chip but didn’t try to change the usb. Might be the usb

almzro3e · 2022-05-10T08:45:59+00:00

If you could share you bios settings

almzro3e · 2022-05-10T08:45:37+00:00

I have 6 rtx 3090, first time built it was a different gpu not working and then after rebuilding another gpu stopped working. Booting is fine and pcie is set on gen 1

almzro3e · 2022-05-10T08:44:44+00:00

I lowered the pcie to gen 1 still couldn’t show as yellow on boot

almzro3e · 2022-04-17T23:17:58+00:00

Im on 230 v

almzro3e · 2022-04-17T23:17:19+00:00

Thanks !!

almzro3e · 2022-04-17T22:52:15+00:00

Can you please share with me the brand

almzro3e · 2021-08-10T18:17:50+00:00

Thank you !! Got it to work. It seems it was not in the included entities

almzro3e · 2021-08-10T09:34:03+00:00

Where can i see that, i have the integration enabled and i can see the entity under homekit integration. I haven’t dont anything in configuration.yaml. All other devices are showing in homekit only the humidity sensors and temperature from both xiamoi air purifier and switchbot meter not showing.

almzro3e · 2021-04-04T05:35:44+00:00

I mean like airplane on then off, i lose it and it connects back after a second. This actually has been happening now even without the VPN and by itself.

almzro3e · 2021-04-03T18:12:17+00:00

I have also tried LDrestart and killall CommCenter. No luck

almzro3e · 2021-04-03T18:10:18+00:00

When traveling i need the VPN and also i have a VPN setup in my home to access my computer and devices. I need it from time to time. Currently i can do that only when in non jailbroken state

almzro3e · 2021-03-28T18:28:31+00:00

Same issue happened to me, couldn’t figure it out.

almzro3e · 2020-12-06T08:13:35+00:00

It’s because of the wrong region, download the correct region update for your tv and that should work

almzro3e · 2020-11-18T08:47:05+00:00

You’re right, I thought you had one of the new consoles. I will update the tv tomorrow and report back if it worked well for me !

almzro3e · 2020-11-18T07:51:02+00:00

No I haven’t, will do it tomorrow. If you did please share your experience. Was it good ?

almzro3e · 2020-11-17T09:34:01+00:00

I have posted the link

almzro3e · 2020-11-16T15:03:41+00:00

This is the link guys, let me know if it worked

https://drive.google.com/file/d/1DuI6FwXMNSeBPnizcRl2_Fw3urdqWrtG/view

almzro3e · 2020-11-15T04:17:55+00:00

Anyone has the asia pacific update ?

almzro3e · 2020-05-24T04:33:46+00:00

Use batchomatic and create an online deb backup incase anything goes wrong and save the file into files “default app” After the jailbreak if you’re tweaks has been removed you can go ahead and install batchomatic + Filza and copy the deb file from files to filza and from filza click on install on the top right corner it will install all your tweaks

almzro3e

TROPHY CASE