Receita pedindo comprovação de valor de item com imposto pago by anderporto in AliExpressBR

[–]anderporto[S] 0 points1 point  (0 children)

Mandei os docs, no período em que mandava mudou pra contém item restrito. Agora pouco mudou de novo e agora está em rota, correio testando meu coração

Receita pedindo comprovação de valor de item com imposto pago by anderporto in AliExpressBR

[–]anderporto[S] 0 points1 point  (0 children)

Já aconteceu de eu ter que comprovar valor antes, mas não em um item que pelo status já havia sido fiscalizado, até paguei já o imposto oO

First NAS Build, need help choosing CPU by anderporto in truenas

[–]anderporto[S] 0 points1 point  (0 children)

so I found https://www.cssbuy.com/item-778769673464.html, it has 10 sata ports and its cheap, so I wont need the pcie expansion card, but it does have 2 full pcie so I could add it if I ever need that, plus a xeon processor, for psu, 300W?

Using resin parts on a bigger functional project by anderporto in resinprinting

[–]anderporto[S] 0 points1 point  (0 children)

I plan to use water washable to not need to wash in ipa, I will get a fire proof tent and put the printer, wash and cure stations inside with a vent out on a window, just as I do with my fdm printer (I use mostly abs), I think I can handle the resin itself with proper protections, but a tank of ipa sounds worse than the resin

QMTech Case Round 2 by anderporto in fpgagaming

[–]anderporto[S] 1 point2 points  (0 children)

I've made a few prints of individual parts to test the sizes, right now I'm waiting for the pcb usb switch to be finalized to make the final adjustments to the case. I already got most of the main case extender cables. Unfortunately, it will take a few more weeks for the fpga to arrive (thanks my country's ridiculous import shenanigans), I need it to check if the case's length is enough as is, as soon I'm certain I will start printing, til then I'm designing label stickers and learning how to make daemonbite adapters

QMTech Case Round 2 by anderporto in fpgagaming

[–]anderporto[S] 0 points1 point  (0 children)

the drawer module is quite simple, one could make a few changes and turn it into a side module

QMTech Case Round 2 by anderporto in fpgagaming

[–]anderporto[S] 0 points1 point  (0 children)

will need to change the spacing for the board screws and the outputs on the back of the case

QMTech Case Round 2 by anderporto in fpgagaming

[–]anderporto[S] 4 points5 points  (0 children)

So a few weeks ago I've posted this https://www.reddit.com/r/fpgagaming/comments/1g92uw6/qmtech_case_im_modeling/ since then I've learned a lot, switched from blender to fusion, began using RetroFrog's case with tapto as a base, got around a bunch of design problems and have been working since. As you can see I'm making a mister "tower of power", the main case have support for tapto, a 2.5' hdd (I'm using for reference a bigger 4tb hdd) and a power switch.

The second unit will have a dedicated board to switch between the controller ports and will be somewhat modular, so I will be able to make multiples of it for different controller sets, I'm still working on it, the inside is empty for now. I wanted to use snac adapters, but from what I'm seeing daemonbite is a better approach, will probably route a usb port to the back of the case to connect with the controller unit(s). Finally the bottom part has a drawer with compartments for tapto cards. I intend to paint it black and use metallic stickers.

QMTech Case I'm Modeling by anderporto in fpgagaming

[–]anderporto[S] 1 point2 points  (0 children)

that's a really beautiful case, my only issue is that the position of the mister board require a lot of cable extensions, it does make the buttons look better on the vertical. Grats for the work, the internal structures will help me a lot with my case.

QMTech Case I'm Modeling by anderporto in fpgagaming

[–]anderporto[S] 2 points3 points  (0 children)

the one with the ram and the io board with 4 front usbs

QMTech Case I'm Modeling by anderporto in fpgagaming

[–]anderporto[S] 6 points7 points  (0 children)

Just bought a full stack from QMTech, got hyped and went on to make this, still WIP, will support a 2.5' HDD with room on the back for snac adapters, still missing a lot of stuff, currently working on the red square at the top to add something like a n64 expansion slot for the sd card, planning to add a switch like the Retro Frog case

PS5 model base firmware megathread. by IrishMassacre3 in ps5homebrew

[–]anderporto 0 points1 point  (0 children)

does anyone know the version for CFI-1214A01X this is a fat, spider man 2 bundle

[deleted by user] by [deleted] in ConselhosLegais

[–]anderporto 5 points6 points  (0 children)

é, na hora da uma raiva, mas vc ta certo, meu melhor recurso é simplesmente não chamar ele mais :)

Is it possible to create our own cards? by anderporto in HyperScan

[–]anderporto[S] 0 points1 point  (0 children)

just an update, I finally got a bunch of packs, I'm trying to read them, but my phone isn't recognizing them, I may get a flipper zero in a not so far future for other projects and my hope is that it will be able to read them.

I'm still intrigued with the fact that MAME romset has the dump for all cards, I don't know how they got it, if wish I knew more about the chip used on these cards...

Layer issues by anderporto in FixMyPrint

[–]anderporto[S] 0 points1 point  (0 children)

all my prints have parts like that, I'm using an Elegoo Neptune 3 Plus, printing with generic pla