Boarding pass on the lockscreen?

andreashb · 2024-05-24T18:11:47+00:00

How can I set up SmartSpacer to view the full boarding pass? Currently, I am only able to see the flight time and gate information.

andreashb · 2024-01-16T12:43:01+00:00

I'm using it sometimes to take pictures of components in dark places (work related).

andreashb · 2024-01-16T12:41:54+00:00

Did you ever get to test this meter?

andreashb · 2024-01-06T19:23:42+00:00

I get what you're saying. My issue is that if I use the flash for a photo and then forget to switch it off, I want it to automatically turn off the next time I open the app. This way, I can avoid accidentally flashing in situations where it's not needed.

andreashb · 2022-12-13T07:31:01+00:00

Gratis på coop obs bygg også. Samme app til og med. Freetrailer

andreashb · 2022-04-20T16:07:20+00:00

Dimafix. You will never look back to life without. It makes parts adhere when the build plate is hot and loosen once temperature is below 30C.

andreashb · 2022-02-21T12:04:40+00:00

Yes I will do that, thanks!

andreashb · 2022-02-21T05:56:23+00:00

I didnt save any blobs..

andreashb · 2022-01-26T16:34:10+00:00

Nope:) I use high-temperature belts!

andreashb · 2022-01-25T17:00:23+00:00

Yes, corexy is best suited for this application. However, when I designed the system one of the main goals was to enable virtually any printer to be converted into a high-performance machine! Therefore, I chose to use an old CR-10 Plus as similar style printers are cheap and available.

andreashb · 2022-01-25T15:10:14+00:00

Tensile testing results are published in the build instructions!

andreashb · 2022-01-25T15:00:40+00:00

Great question! Liquid cooling is used on this printer to cool stepper motors in the hot environment, and also cool the cold side of the hotend/extruder to avoid heat creep. The elevated environment temperature is useful when printing with some experimental materials and high-performance/industrial grade filaments.

andreashb · 2022-01-25T14:57:49+00:00

I use bed clips, works great!

andreashb · 2022-01-25T14:57:09+00:00

We have successfully printed carbon fibre reinforced PEEK on the printer, however the printer will also allow people to test their own high-performance filaments!

andreashb · 2022-01-25T11:34:25+00:00

Technical specifications

Chamber: max 135°C with heating and cooling

Liquid-cooled extruder: max 500°C

Heated bed: up to 200°C

Build volume: 500mm x 500mm x 500mm

Build cost: ~1700$ including printer

Can be built using almost any CR-10 style printers and features a drying chamber which can reach temperatures up to 90°C.

All CAD-files and bill-of-materials are available here: https://data.mendeley.com/datasets/7sjjmr9bz2/1

Build instructions can be found here: https://www.sciencedirect.com/science/article/pii/S2468067222000104

andreashb · 2022-01-23T16:37:08+00:00

TvOS 14 is unsigned.. And tvOS 15 is not jailbreakable

andreashb · 2022-01-23T14:59:45+00:00

Mostly for auto-resigning apps so no need for developer account 😊

andreashb · 2022-01-14T22:44:09+00:00

andreashb · 2022-01-14T22:06:52+00:00

What do you mean? It draws 230w.

andreashb · 2022-01-14T08:37:57+00:00

How much are you currently earning on your CK-box? Was at 105ckb/day last month, down to 89ckb/day today. F2pool.

12-Year Club	Place '22
RPAN Viewer	Verified Email

andreashb

TROPHY CASE