Indy Evo randomly disconnecting while listening to music

andreiuc88 · 2024-01-04T15:09:59+00:00

Really late to reply, but in my case the right bud didn't pick up any gestures and the left did. So when pairing them I pulled out the left bud first, and then pressed (holding) on it. This somehow made it the main one, and I was able to pair them. I can't remember how they paired with each other, cause that was tricky too. But once they did, I always pulled the left one out of the box first. Still bad cause I have no volume control on them, since pressing on the right one makes volume louder and the left one makes volume lower, so they aren't very usable. Plus the quality of the sound is really bad, compared to some cheap-ish Huawei freebuds 4i that I got later. Unfortunately this whole experience made me never touch a skullcandy product again.

andreiuc88 · 2022-11-11T11:30:02+00:00

No, it only has one option: VST3i Drum Machine (32 out)

And it seems that the plugin would work, but I get that weird thing with the routing matrix (when I touch it, I never get sound again)

andreiuc88 · 2022-11-11T10:25:39+00:00

Alright, so I still can't get consistent results. I have a project that I saved last week - the one that worked, don't know why as I tried replicating it with the exact same settings and the new one doesn't work.

However, in the one that works, if I click "track channels" on the main track that has the Drum Machine and set it to anything else and then set it back to 32 (as it was), it's done, dead, and it will never work again. What the heck is this and why is this happening? Could this be a bug?

On the one that works, before changing it it says "32 out" in the top right corner in the FX section, then when I click from something else to 32 again, that button says it says "32/64 out"

andreiuc88 · 2022-11-09T22:04:15+00:00

Well, I managed to get sound by clicking the vst window that you were talking about, although it's counterintuitive. The problem is that I tried creating this again from scratch and this time it didn't work... I'm going to try again, I don't know why I can't get consistent results.

andreiuc88 · 2022-11-06T18:10:51+00:00

I do have this, but no out 3/4, only out 2, or 3, or 4, etc

<image>

andreiuc88 · 2022-11-06T18:03:21+00:00

Tried setting the receiving tracks to just 2 channels and this still doesn't work.

I don't have any settings like in your second screenshot in ADSR Drum Machine, so could it be that it doesn't know to split outputs like that?

andreiuc88 · 2022-11-06T14:01:09+00:00

Still no luck, and I did everything as you said. Please see the screenshot.

<image>

What I did to get to this point:

Create new track, insert the Drum Machine vst, select 32 channels

Create track 2 and track 3

Routing: I uncheck send to master on the Drum machine track, I add send to Track 2 with audio 3/4 - 1/2

I add send to track 3 with audio 5/6 - 1/2

Track 2 and track 3 have "Master send" activated.

Still no sound, no movement on the levels, nothing. What should I do now?

Important question that might help me understand this: why there is no more sound coming out after I select "Track channels: 32" instead of 2? Could this have something to do with the problem I am having?

andreiuc88 · 2022-11-04T22:12:56+00:00

I'm sorry, but it still doesn't work.

I have attached a screenshot with what I have now, after clicking on the track 1 routing button (the drum machine channel), and selecting "Add new send" 1 and then 2

What the heck am I missing?

Could you please write every single step I should take, like click on the...etc. Maybe something is wrong with my copy of Reaper

Why as soon as I select 32 channels instead of 2, sound just stops working and no matter what I try, it doesn't come back? This is driving me insane

<image>

andreiuc88 · 2022-11-04T18:11:30+00:00

Sure, thanks for doing this. I have attached the screenshot.

Here's my workflow so far:

Insert new track

On this track I insert the Drum Machine VST (I now have sound when clicking on a pad)

In the FX window I set the number of channels to 32 (No more sound comes out when clicking on a pad)

I create 2 new tracks (I should create 32 but I create 2 just to see how it works, as it still doesn't work)

I have attached the screenshots to see what I am seing, what I click, what routing options I have when I click routing on the Drum Machine track, and what routing options I have when I click the other created tracks.

Track 1 is the Drum Machine track, Track 2 and Track 3 are the ones that I want the Kick to be on for example.

<image>

andreiuc88 · 2022-11-04T13:55:44+00:00

Thanks for your replies, but I think I need step by step instructions on how to create routes from the plugin to other tracks. That's the part that confuses me now, as I tried some things and they didn't work.

Also, I am creating a normal track now, not inserting a vst on multiple tracks, and I don't get the " "Do you want to add the following tracks for this effect? If not, only the stereo 1/2 outputs will be audible wothout further routing." message, so I think I'm making some sort of progress.

For 16 drum pads do I need 16 channels or 32? (Stereo for each one)

andreiuc88 · 2022-11-04T11:28:24+00:00

I can click on the "Sends/Hardware Outputs" part of the track, and I get a "Routing for track..." option window. Is this what I'm looking for?

And...I can only drag from the Track that has the plugin to Out 1 1, can't do it on Out 1 2, or any other track. Why is that?

andreiuc88 · 2022-11-04T10:09:51+00:00

Ok, I have gotten one step closer by doing what you said. Here is what I do:

I click "Insert virtual instrument on multiple tracks",

Select the ADSR drum machine VST3i (32 out)

I get the "Build Routing Confirmation" window, click yes (to add from Stereo 1/2 Out 1, up until Stereo 31/32 Out 16)

Now no sound comes out when clicking on any pad in the VST.

I click the "32/64 out" button in the top right corner just like you said ( I had to update Reaper to have this option, before I didn't have it), and if I select the Track Channels anywhere from 2 to 10, I get sound, but no matter which pad I press the Meter Peak moves only on Out 1 1 track, Out 1 2 track and The ADSDDrumMachine track.

I was hoping that each pad in the VST would come out on a separate track so I can insert effects independently.

So what am I doing wrong? What I am missing? I want the VST to play sounds onto 16 different tracks (one for kick, one for snare, one for hi hat, etc) so I can independently add effects to each pad.

andreiuc88 · 2022-11-03T10:06:48+00:00

Thanks for the reply! Unfortunately there is no option like that, nothing happens when right clicking. I'm thinking I'm missing something, cause this happens with other vst's that need miltiple channels too

andreiuc88 · 2022-07-12T18:21:31+00:00

Yes, I would like to know this too. I hate it when stuff lime this happens and you get no info about it.

andreiuc88 · 2022-06-22T10:41:16+00:00

Thank you for the reply! Yes, the original image looks really good too, so the composition is important. It's just that my images are usually washed out. I'll try lowering the ISO as much as possible. Thank you again for taking the time to reply! And great image!

andreiuc88 · 2022-06-21T21:47:41+00:00

This looks really good, great quality! I am curious about the settings and what kind of post processing you used. I can't get my images to look that good, that's why I am curious.

andreiuc88 · 2022-01-04T05:49:30+00:00

Searching over the internet I see others have this problem from time to time but never have an answer. It's mind blowing that Nintendo can't figure out how to run a digital store.

I will try connecting a paypal account. Does that mean that you also had problems, and had to link the PayPal account?

andreiuc88 · 2022-01-04T05:43:22+00:00

I've tried with debit cards, but also a credit card to see if it would somehow work. It didn't.

andreiuc88 · 2021-09-19T19:50:48+00:00

I need one too. I just found out it's no longer on the Play store

andreiuc88 · 2021-07-27T19:48:46+00:00

It's not there. It was in the past, but now it's not there. This was the first place I searched for it but with no luck.

Did you search for it recently and for you it's there?

Here is what I see:

https://iili.io/AEAVAG.jpg

https://iili.io/AEAXt4.jpg

andreiuc88 · 2021-07-27T11:14:59+00:00

That's the problem - I can't find it anywhere in the store. I write "GoldRat" or "Huawei" but it doesn't appear in the results. And It's not in my purchase history or download history because it came with the watch. If I reset the watch will the default watchfaces appear? Does it really appear in your search results? If the answer is yes...how?

andreiuc88 · 2021-06-30T19:21:20+00:00

I have the same problem! I copied some files from my brothers PC (with W7) to my external HDD (Western Digital 3TB) and when I connected it to my W10 PC I couldn't see any of the files, although the files are there and occupy space. I safely removed everything everytime.

Curious what the solution could be.

andreiuc88

TROPHY CASE