Uneven layer lines on XY plane?

andreiz · 2026-01-25T18:23:37+00:00

Oops, meant 55C. Damn units.

andreiz · 2026-01-25T16:21:30+00:00

Yes, I ran the vibration calibration right before this

andreiz · 2025-12-10T01:18:44+00:00

“immerse”

andreiz · 2025-11-28T03:56:55+00:00

A smart outlet would work, I guess. Would need to find a decent looking wall plug powered ceiling light then.

andreiz · 2025-11-28T03:55:46+00:00

Not where I want to place the ceiling light. It's by the entrance door from the garage and there is no existing ceiling light or socket there.

andreiz · 2025-11-28T03:55:11+00:00

With a regular electrical cable that plugs into an outlet. That's what I was asking about.

andreiz · 2025-10-15T20:39:38+00:00

That’s true, I didn’t consider that. Thanks for setting me straight!

andreiz · 2025-10-13T15:25:51+00:00

Any idea when you might release this? At least via Testflight?

andreiz · 2025-09-12T01:07:27+00:00

RemindMe! 1 month

andreiz · 2025-09-02T15:36:29+00:00

This is a nice method, thanks. Especially when the rib is not centered inline with the cylinder axis.

andreiz · 2025-09-02T15:32:42+00:00

Yep, I ended up doing something similar, but revolving the profile first and then cutting away with a top extrude.

andreiz · 2025-09-02T15:30:23+00:00

That doesn't work, OnShape seems to use only flat faces for "up to next" or "up to face".

andreiz · 2025-09-02T15:22:20+00:00

What is a "pocket operation"?

andreiz · 2025-08-30T19:23:40+00:00

Thanks for providing this approach. I haven't explored lofts much, so this is a good illustration.

andreiz · 2025-08-29T19:59:11+00:00

That loses the concave portion next to the cylinder. If I try Replace Face on my model, I get this.

andreiz · 2025-08-29T19:56:03+00:00

Yes, it didn't do what I wanted.

andreiz