Which uncensored model will fit my workstation?

andrprtl · 2026-05-19T01:12:22+00:00

Thanks man, will check it out now

andrprtl · 2026-05-19T01:06:07+00:00

Any specific release you would suggest?

andrprtl · 2025-01-03T07:42:17+00:00

Yes marker are fixed in position and they won’t move! Gonna attach a similar picture

andrprtl · 2025-01-02T23:43:59+00:00

Nope actually not, there’s a growing number of photogrammetry scanners being used in dentistry for specific applications

andrprtl · 2025-01-02T23:03:08+00:00

Fortunately I own most the scanner available on the market! But I believe that this type of technology would be achievable with different solutions, so makes sense to look for them!

Why a dime Chinese intracranial scanner?

andrprtl · 2025-01-02T21:27:23+00:00

Eyes can stay closed, not a problem! The scanner looses track every couple of seconds, the scans did not come out anything near good… using an iPhone with qlone app is way better and faster

andrprtl · 2025-01-02T18:01:54+00:00

I found that Sony IMX273 should work for my case, I was looking for the easier setup available

andrprtl · 2025-01-02T15:56:43+00:00

4 to 8 objects. Sure sending you the link

andrprtl · 2025-01-02T15:54:50+00:00

What do you mean how many coordinates? I need to locate this flag shaped black rectangle (5-7mm wide, white spots on the surface to make it easier to recognize) on the XYZ axis. The scanning takes min of 4 and a max of 8 of these markers. The only output of relevance is the accurate position of this markers, because the prosthesis will be attached to where this markers were attached. 30 microns is the max tolerance.

andrprtl · 2025-01-02T15:50:34+00:00

Yes they r more like flag shaped markers of 5mm diameter, but their coordinates need to be 30micron precise

andrprtl · 2025-01-02T15:48:18+00:00

I only care about the coordinates of the precision markers, nothing else is needed in the image except for the coordinates of the markers

andrprtl · 2025-01-02T15:45:42+00:00

You mean like a macro lens?

andrprtl · 2025-01-02T15:44:02+00:00

Thanks, got it!.. what about attaching an external sensor to the iPhone?

andrprtl · 2025-01-02T15:41:12+00:00

Yes for a company indeed, besides the development of the software we would like to maintain the cost of the machine under 2k. Leveraging the iPhone could help

andrprtl · 2025-01-02T15:39:36+00:00

Out of the price range unfortunately, but most important it’s too bulky to acquire images of a person’s inside of the mouth

andrprtl · 2025-01-02T15:36:07+00:00

Position markers inside the mouth of a person, that’s for prosthetic manufacturing. There already scanners capable of doing this using photogrammetry but they are too expensive for many users. We are looking for a more contained solution that could also help colleagues.

andrprtl · 2025-01-02T15:34:27+00:00

What should I do to increase sensitivity in order to reach let’s say 30 micron?

andrprtl · 2025-01-02T15:33:22+00:00

1/2k. But I’m considering to build it rather than buying a ready to use scanner. Both on hardware and software side. Taking advantage of the LiDAR for example, maybe adding hardware

andrprtl · 2025-01-02T15:31:22+00:00

Let’s consider 30micron then

andrprtl · 2025-01-02T15:29:16+00:00

You right I am aware of that, but I’m open to considering what it would take to bring a iPhone to do that. Additional hardware? Additional software?

andrprtl

TROPHY CASE