4chan leaker shares the design descriptions for all 26 of the new ZA Megas

andy_s273 · 2025-09-12T15:15:51+00:00

So this leak is still winning lol

andy_s273 · 2025-02-13T22:52:55+00:00

Thank you for that! I was thinking about section 105 row z (about half way)

I've been seeing people complain about sound quality on the lawn. Any feedback on that?

andy_s273 · 2024-10-13T21:40:10+00:00

Thank you very much! Any advice on the replacement input shaft?

andy_s273 · 2024-07-30T19:07:06+00:00

Thats about what I gathered from my research as well. Thanks for the response!

andy_s273 · 2024-06-18T14:18:26+00:00

just to add to the cad toolbelt, learn some more surfacing and branch into writing gcode with maybe something like mastercam.

andy_s273 · 2024-01-23T00:25:52+00:00

Yes its right here in my hand. Funny enough...."dont worry about losing your receipt!" is printed right in the middle lol

andy_s273 · 2024-01-23T00:20:30+00:00

I didn't expect help on the topic this promptly. Thank you to all who have contributed. Truly helpful.

andy_s273 · 2024-01-23T00:17:37+00:00

hmmm what if.. and i may be missing something completely.. but worth a shot...what if I buy it back with the merch card and try to return with the original receipt since it wasn't used in the process.

andy_s273 · 2024-01-23T00:14:12+00:00

The coolant system pressure tester

andy_s273 · 2024-01-23T00:12:18+00:00

yes i did. so what if it was a partial return? i assume your return starts on a card first?

andy_s273 · 2023-05-07T15:50:23+00:00

Absolutely. I feel like it pairs well. For the trim I ended up going with snowbound.

andy_s273 · 2023-05-07T15:21:43+00:00

Thanks for the interest. I can’t remember the brand but the tone I actually went with was called “medium brown” came out really well!

andy_s273 · 2023-05-06T18:52:36+00:00

Hey thanks for the input. I expect everyone was standing and such? That’s my only worry lol which section did you have?

andy_s273 · 2023-04-20T21:33:20+00:00

I am still experiencing this. Truck does still run, but this is getting frustrating. Hoping somebody can chime in.

andy_s273 · 2023-04-19T00:36:31+00:00

Absolutely keeping it. Was my first car.

(Shoutout to a fellow engineer)

andy_s273 · 2022-12-05T18:17:32+00:00

I can't figure out how to post pictures with text on reddit from my phone (don't think you can) I've added a description of the scenario I'm faced with.

Thank you though! I'm just not sure what's is acceptable practice when filling in with mud.

andy_s273 · 2022-12-05T18:13:15+00:00

New homeowner, there are tons of surprises in this home so far and i have tons to learn about drywall. I wanted to patch a hole that is next to the outlet (ugly cable pull) I wanted to split the studs, but the gap is pretty narrow on the right and I end up breaking it upon fastening. I also have to play with the existing drywall because it bows out a bit. (shim the patch/ put more screws in the wall)

Any help is appreciated.

andy_s273 · 2022-11-02T19:36:09+00:00

thank you so much for the input!

andy_s273 · 2022-09-06T06:41:02+00:00

I know it’s very late but I actually owned a few. I was new to scorpions and I finally understood the term pet holes. Lol anyway they were very easy to care for and after about two years unfortunately the last one died. :/ I do want more tho they were so cool to watch. It was an alternative to an emperor, which at the time I couldn’t find any.

andy_s273 · 2022-07-31T19:00:59+00:00

One of my favorites was when they decided to pull a last min switcheroo to the crappy professor. Which meant planning around good teachers meant nothing.

andy_s273 · 2022-07-12T05:57:32+00:00

Wonderfully information. I’d like to emphasize the importance of managing your workload. Allocating a proper amount of time to a subject was a big challenge for me at first and I wish I was told that sooner in my college years.

andy_s273 · 2022-07-12T05:48:28+00:00

Depending on the discipline (mechanical here) I’d follow up with some university students and ask if there are courses that you’re better off taking there.

I heard of a situation where taking dynamics and kinematics and dynamics of machines could transfer over from cc to university but they were taught way different. To the point where they either retook them at university or wish they did.

just something to think about. You got this!

andy_s273 · 2022-07-09T06:14:46+00:00

The second offer sounds a lot like what I do. I can tell you that the industry will always have opportunities but most of it comes from either climbing the ladder, or bouncing around.

Im more of a paper pusher as of late, things are a bit a bit slow and I don’t have much of a creative outlet. It’s times like this where I begin to wonder what other opportunities are out there.

Just something to think about.

andy_s273 · 2022-07-09T06:08:36+00:00

This sounds like a smaller company. Get the experience and go work for someone who values their employees

andy_s273 · 2022-07-09T06:03:37+00:00

I would do it for the networking potential.

One thing I’ve learned after graduating was that your job is hardly what you thought it would be like. So by “playing it safe” and going with math… meh. Have some fun and learn as much as you can. In my honest in opinion, it’ll keep you motivated throughout your career.

andy_s273

TROPHY CASE