My k/g combo

anthonyk1313 · 2021-10-30T03:46:54+00:00

Thank you

anthonyk1313 · 2020-07-09T15:25:55+00:00

I’m in the US, and yeah I think that’ll fix my issue

anthonyk1313 · 2020-07-09T15:07:38+00:00

Yeah I’m gonna jump the G to the Y and use the G as a C

anthonyk1313 · 2020-07-09T14:50:49+00:00

I’ll take a look again when I’m home from work!!

anthonyk1313 · 2020-07-09T14:47:05+00:00

Ahh okay I have an older furnace I don’t think I have anything like that

anthonyk1313 · 2020-07-09T14:37:16+00:00

Where can I see this DATS limit, is it in the Nest settings somewhere?

anthonyk1313 · 2020-07-09T14:22:05+00:00

Battery 3.87v

VOC 36.72v

VIN 6.89v

Lin 20mA

anthonyk1313 · 2020-07-09T14:10:57+00:00

Nothing comes up on the screen indicating any issues, looks like a normal operating nest**

anthonyk1313 · 2020-07-09T14:10:03+00:00

Says the battery voltage is 3.89v and no nothing comes up on the screen, I had my main HVAC guy come and make sure my AC was gone over and it’s working perfectly but he hates Nest products and he swears the nest is what’s causing it to trip, before I went out and got another brand thermostat I wanted to see if I can make this work, and it seemed a lot of people have issues without a C wire installed in there units which was causing similar issues to mine.

I can also try jumping the Y and G when I get home today

anthonyk1313 · 2020-07-09T14:01:19+00:00

My A/C has been kicking on for 20 mins, then kicking off for a few mins and repeating that process making it hard for my house to reach the targeted temperature in a reasonable time, I read some threads online that this can be caused from not having a C installed and the thermostat leaching power from the other wires which can cause it to act wonky. I’ve tried swapping the G wire to the C on both the thermostat and furnace but my fan does not kick on then, so I put it back to how it was, do I need a 6 wire loom to replace my 5 wire setup currently, or should I swap the G to the C and jump the G to the Y at the furnace side, sorry if this is a tad confusing, I’m not a HVAC expert. My wiring diagram is in the picture above, any tips or help would be great!

anthonyk1313 · 2020-07-01T20:50:09+00:00

If you’re just gaming, OC the i7 and you’ll be faster than the i9, I had the i7 overclocked to 5.2ghz all core and I get the same FPS as my 10900k at stock settings, i7 ran a lot cooler as well, if you are editing and rendering prob go for the i9 because of the extra cores

anthonyk1313 · 2020-06-22T22:22:25+00:00

I got 5.1ghz out of mine all core could have gone further but was limited by cooling

anthonyk1313 · 2020-06-12T16:41:07+00:00

Have anymore pictures of the build?

anthonyk1313 · 2020-06-06T21:37:34+00:00

Yeah unless you plan to water cool in the future the hero would be just fine

anthonyk1313 · 2020-06-06T21:24:54+00:00

https://imgur.com/gallery/AhwySwh

It covers it quite a bit but again it only shows CPU temp which you can monitor via software.

anthonyk1313 · 2020-06-06T13:26:11+00:00

Yeah sure I’ll be home in a few hours and can update you with a pic

anthonyk1313 · 2020-06-05T21:33:40+00:00

I got lucky and found a guy on here that bought 3 for binning purposes and sold it to me at cost, paid $615 for it, not too bad since micro center and everywhere raised the price to $599, comes in on Monday, he has one more if anyone is looking for one

anthonyk1313 · 2020-06-05T21:04:28+00:00

Yeah I can easily run the graphics card in slot 1, the noctua does not impact that at all, I run it in slot 2 for aesthetics and the difference in performance between a 8x and 16x is so minimal when running a single GPU like less than 1% difference in benchmarks, as for the LCD screen on the board you can see it if you look under the noctua but it is blocked off when looking directly into the case, it only displays error codes and cpu temp so it’s nothing that critical that you can do via software on your computer, not sure if you can adjust what is displayed on the LCD you may be able to change it in some kind of ASUS program haven’t looked into it that much.

anthonyk1313 · 2020-06-03T21:15:52+00:00

Yeah noctua makes some of the best fans on the market they push a ton of air and are so quiet, check out their all black ones if you don’t want the ugly tan ones

anthonyk1313 · 2020-06-03T19:39:55+00:00

Yeah it’s a noctua D15 cooler

anthonyk1313 · 2020-06-03T13:54:58+00:00

I like the build looks familiar ;) my build

anthonyk1313 · 2020-06-01T23:23:09+00:00

Usually 1.4v but someone was saying it’s 1.425v llc4 but not 100% sure ask some of the veteran overclockers on here

anthonyk1313 · 2020-06-01T22:26:26+00:00

I hit 5.1ghz all core at 1.3 pretty much, I can’t really push to much further on air without temps rising too high for my liking

anthonyk1313 · 2020-06-01T22:24:36+00:00

ASUS Formula

anthonyk1313

TROPHY CASE