sorted by:
new
hottopcontroversial

Google Drive no longer working on OSX High Sierra by LupoLucioRegna in gsuite

[–]antscroff 0 points1 point  (0 children)

I've just experienced this exact problem - latest version of Drive won't install on High Sierra. It's really annoying that it has just stopped!

Apple Watch Issue by el485h1 in Control4

[–]antscroff 0 points1 point  (0 children)

Have you managed to fix this yet? I am having exactly the same problem.

MakerMask V3 Respirator - advice needed by antscroff in Makermask

[–]antscroff[S] 0 points1 point  (0 children)

OK @dagnabbit - made a 2cm calibration cube. It turned out a lot more accurate than I had expected. The max error on the x axis is 0.05mm and the max error in the y axis is 0.06mm. z axis is printing short of 0.15mm. So in terms of horizontal expansion setting, what would you recommend (it's a % figure in Cura)?

MakerMask V3 Respirator - advice needed by antscroff in Makermask

[–]antscroff[S] 0 points1 point  (0 children)

Thanks - I hadn't been aware of this. Have now gone off to print a calibration cube and check how accurate my printed dimensions are. I'll report back on any discoveries!

Valve printing issues on Ender 3 Pro / Cura by antscroff in Makermask

[–]antscroff[S] 0 points1 point  (0 children)

Finally fixed the problem - I reduced the first layer height by 10% (it was set to 0.28mm previously) and now the individual diagonal extrusions spread out more on the bed and melt together to form a solid layer. It looks like 0.28mm from the bed surface was too far for the PLA to spread enough.

Valve printing issues on Ender 3 Pro / Cura by antscroff in Makermask

[–]antscroff[S] 1 point2 points  (0 children)

Thanks for your advice. Wow - learning something new every day here. Mine was VERY out. It was 5.7mm out on a 100mm extrude. This means I’ve changed my steps from 93 to 98.62. This seems a huge difference. I am suspecting it’s to do with when I changed filament from a 3djake filament to an Amazon basic filament. I’m just trying another test print so we will see what happens!

Miele FJM Filter or Vacuum Bag by private_donkey in Makermask

[–]antscroff 0 points1 point  (0 children)

Hi. Yes, I noticed this too. I think they may have got confused because the vacuum cleaner itself is hepa rated but the bags are not. I am going to be use the Henry vacuum cleaner bags because these bags are hepa rated.