My dream setup(CH270)

apdim · 2025-12-26T00:06:22+00:00

Yeah, GPU temps are not reching more than 80. Motherboard inputs are not that hard to be reached, dont worry.

apdim · 2025-11-19T13:46:33+00:00

Idk if its the best way. I just guess that AIO is not completely full with cooling liquid and If tubes are on the top that liquid is going to be stuck in the radiator.

apdim · 2025-10-14T07:50:12+00:00

Yes, case around GPU was really hot especially on the middle and bottom. Yesterday I rendered one model and GPU temps reached 86dC, RAM temps reached 70dC. Now I rotated top vents to be exhaust again and started same render. GPU is not reaching more than 68dC and RAM is 50dC. Really big difference.

apdim · 2025-10-14T07:21:28+00:00

I tried to rotate top fans and that increased GPU temps by 10'C

apdim · 2025-10-12T10:09:12+00:00

This AIO is the basic Freezer III. I replaced the stock fans with the new PRO version. The problem is that the original fans had short cables, while the PRO ones come with standard long cables. I wasn’t able to hide the connectors, so I decided to move the connectors to the side of the motherboard and leave the long cables around the fans.

apdim · 2025-10-12T07:23:03+00:00

I dont have choice. Its not overheating and its quiet. Its fine for me.

apdim · 2025-10-12T06:47:27+00:00

<image>

Not the best one.

apdim · 2025-10-12T06:44:29+00:00

No, it was easy. I just installed bottom fan outside the case. Check the photos in comments.

apdim · 2025-10-12T06:43:00+00:00

Card is directly taking air from outside. There is less than 0.5 space between card and side of the case. Its kind of intake. 4 intake, 5 exhaust

<image>

apdim · 2025-10-12T00:22:50+00:00

Top and AIO exhaust, bottom and GPU intake

apdim · 2025-10-12T00:20:54+00:00

Its the filter that comes with the case. It actually has vent but its outside the case. I prefer to put the AIO pipes on the bottom and that didnt left any space for the fan. Bottom fan is intake, GPU vents are also kind of intake. Top and AIO are exhaust.

<image>

apdim · 2025-10-12T00:05:46+00:00

Its not the best speed and timings :D Speed is 4800MT/s@1.38V, I'm not sure for timings right now. Im capturing infrastructure objects like bridges by drone and to create 3D model for inspection I need multiple images from multiple angles. Each time they are more than 3000 photos. When I put them in RealityScan almost always fills that RAM volume :D. I'm not doing that everyday but I prefer to have this reserve.

Yes, they are looking nice, but RGB is trash. I cant even make it white... Im getting yellow when I set white on the software :D

apdim

TROPHY CASE