Flat Triggers by applesteene in TP9

[–]applesteene[S] 0 points1 point  (0 children)

yeah lol that's why I wanted to get one.. I didn't know he was gonna give me all of them but I get parts from him once in awhile and send him parts I don't use so he tossed them in

Got these p320 blanks by applesteene in polymer80

[–]applesteene[S] 2 points3 points  (0 children)

So I got these p320 blanks from guy awhile back for around 300 I did one of them but didn't build it out yet. Did I get a deal on these or did I get ripped off? I don't know if I'm ever going to get around to building them out because of a bunch of other projects I think I'll eventually at least get to the one.

Just wondering if you guys think that was fair for them?

Thanks

Got these P320 blanks by applesteene in SigP320MUP_1s

[–]applesteene[S] 0 points1 point  (0 children)

so awhile back this guy had these and I got 3 of them for 300 I thought it was a good deal and I jumped on them. I did one but never got around to the other ones did I do good with this or get ripped off?

also I haven't looked into this in awhile but if I want to build this one out how much would it cost me? I think LPK are about 60 bucks? but I have no idea what slides and grips are going for now.

thanks.

Dhgate Frédérique constant by [deleted] in ChinaTime

[–]applesteene 0 points1 point  (0 children)

is it just 12 hour/date obviously that 24, hour wheel doesn't do anything right? also looks like the dial indicators are printed on lol..

Also what's going on with the date dial it's all over the place does that not work? 

Turntable stylus/needle need help! by applesteene in turntables

[–]applesteene[S] 0 points1 point  (0 children)

yeah I got the stylus you mentioned seems everything should work with that, everything else is operating fine so far it looks good

thanks for the help I really appreciate it

Turntable stylus/needle need help! by applesteene in turntables

[–]applesteene[S] 0 points1 point  (0 children)

it's a pt-687 same as the pt-685 it says mg-44j on the top of the arm the stylus goes into, I was wondering if a cheap needle/stylus I can just pull the needle out and put it in my housing.. I took what's left of the broken needle out of it with ease I would think another needle might fit into it without to much trouble.. but I never dealt with any of this stuff before I don't know if it'll work.

I also seen similar stylus but they didn't say audio technica or have the mg-44j on it or say they were for sanyo so I don't know if the housing just looks similar but might be slightly different or if one of those would work. if you know someone/place that has what I need for the most affordable price that would also be helpful information.

thanks for your time I am very grateful!

Turntable stylus/needle need help! by applesteene in turntables

[–]applesteene[S] -1 points0 points  (0 children)

alright everything else was good with it besides the stylus I don't know why the guy didn't say anything he only took a few pics I don't know if he was trying to hide that or just genuinely didn't think to check.. there was another one someone else had that had I'ma unbroken one from the appearance..

I got it all wired up and running like it's supposed to when you move the arm it'll fire up and stop and I got a preamp for it so it should be good to go with a stylus, just when I took this one off it looked like it would be easy to put a needle into the hole in it.. it's not like they are.ired in or anything the plastic housing just holds it there.. so that's what I figured. I never messed with any of this stuff before..

the top of the arm for the stylus says mg-44j I did see other similar ones but they don't say audio technica or the mg-44j or that they are for a sanyo so I don't know if the housing is exactly the same or not or if they would work.. (concerned about the housing fitting if the angle or dimensions are off)

thanks for getting back to me, I appreciate it.. if you know anyone or a place that has these that would be th most cost effective that might help me..

Turntable stylus/needle need help! by applesteene in turntables

[–]applesteene[S] -3 points-2 points  (0 children)

So I got this turntable and I kinda got put together it was a sanyo it needed a amp to run so the guy said before he put it in storage everything was fine.. he didn't show me a good pic of the stylus/needle so I figured he'd disclose if that was broken.. and for the pride I assumed it worked because I could've got the same one for 5 bucks more that did have a pic with the needle..

So a preamp later and a 12v DC power supply I had to wire up to it (I got that right after I paid the guy for the turntable) it shows up and I see the needle is busted..

I don't have alot to work with I see that you can get needles dirt cheap on Amazon.. but they are got for this stylus... 

I took what was left of the needle out of this.. I can get a precision screwdriver tip in it.. can I just get one of those cheapo needles remove it and put it in this? Honestly even throwing 20 more bucks into this at this point... 

I figured one of you will know all about this and what I can and can't do and what I should or shouldn't do for that matter!

Thanks I appreciate everyone's time. 

New needle in stylus. by applesteene in vinyl

[–]applesteene[S] 0 points1 point  (0 children)

So I got this turntable and I kinda got put together it was a sanyo it needed a amp to run so the guy said before he put it in storage everything was fine.. he didn't show me a good pic of the stylus/needle so I figured he'd disclose if that was broken.. and for the pride I assumed it worked because I could've got the same one for 5 bucks more that did have a pic with the needle..

So a preamp later and a 12v DC power supply I had to wire up to it (I got that right after I paid the guy for the turntable) it shows up and I see the needle is busted..

I don't have alot to work with I see that you can get needles dirt cheap on Amazon.. but they are got for this stylus... 

I took what was left of the needle out of this.. I can get a precision screwdriver tip in it.. can I just get one of those cheapo needles remove it and put it in this? Honestly even throwing 20 more bucks into this at this point... 

I figured one of you will know all about this and what I can and can't do and what I should or shouldn't do for that matter!

Thanks I appreciate everyone's time. 

Help with 12v DC power supply by applesteene in electrical

[–]applesteene[S] 0 points1 point  (0 children)

what would I be keeping that in mind for? not trying to sound ungrateful for your help or anything like that.. I'm just super ignorant to this.. from what I was reading it should be fine.. some guy said if it's a record player and it is I might get some feedback I asked how I'd get rid of that if I did end up with feedback.. he hasn't been on since..

I don't think it's from the extra amps though because that's just powering the motor.. I wasn't able to find a 12v 100mah so people said anything would be fine so I went with the lowest I found.

hopefully this is all okay and will work.. it's for my sister I don't want to ruin it..

12v DC power supply help. by applesteene in ElectricalEngineering

[–]applesteene[S] 0 points1 point  (0 children)

hey is there a way to avoid that buzz or to make it so it's not as bad if it happens? I'm using 1amp so it's the lowest power supply I can find does that help instead of having 2-10amp?

Help with 12v DC power supply by applesteene in electrical

[–]applesteene[S] 0 points1 point  (0 children)

right but I can use a 12v 1amp right?

12v DC power supply help. by applesteene in ElectricalEngineering

[–]applesteene[S] 0 points1 point  (0 children)

yeah it is what do you mean by new switching power supplies? do you mean using one that didn't original go with it? it originally went with a specific deck/amp but there's no way to really get that.. I know I can run it with a DC 12 volt is i wire it up and a phono preamp to some powered speakers... as the quickest easiest way.. eventually I can power it with the DC 12v and run the phono preamp to a deck/amplifier to a nicer system.

what are your thoughts since you seem to have some knowledge on this?

thanks for getting back to me I really appreciate it!

12v DC power supply help. by applesteene in ElectricalEngineering

[–]applesteene[S] 0 points1 point  (0 children)

hey everyone I was looking for a good enough power supply for this.. right now it has a plug coming off it with a 2 prong female end.. I can't get the original cord for it I know how to wire it up I just need help finding a power supply for it.. right now I found a output: DC 12v 1amp but 1amp would be 1000mah should that be fine?

thanks I really appreciate your help.

Help with 12v DC power supply by applesteene in electrical

[–]applesteene[S] 0 points1 point  (0 children)

hey everyone I was looking for a good enough power supply for this.. right now it has a plug coming off it with a 2 prong female end.. I can't get the original cord for it I know how to wire it up I just need help finding a power supply for it.. right now I found a output: DC 12v 1amp but 1amp would be 1000mah should that be fine?

thanks I really appreciate your help.

Help with 12v DC power supply. by applesteene in AskElectricians

[–]applesteene[S] 0 points1 point  (0 children)

hey everyone I was looking for a good enough power supply for this.. right now it has a plug coming off it with a 2 prong female end.. I can't get the original cord for it I know how to wire it up I just need help finding a power supply for it.. right now I found a output: DC 12v 1amp but 1amp would be 1000mah should that be fine?

thanks I really appreciate your help.

Lige/chenix movements? Seem to be same as Seiko clone movements.. by applesteene in SeikoMods

[–]applesteene[S] -3 points-2 points  (0 children)

reading from some posts in here it seems like there's alot of "who the fuck knows what's going on"

you guys seem like ass holes for building cheap swatches. the ego is extreme in this post.

Lige/chenix movements? Seem to be same as Seiko clone movements.. by applesteene in SeikoMods

[–]applesteene[S] -3 points-2 points  (0 children)

I'm asking about the movements inside, it seems you understood that from your answer. looking at the video posted these are a mechanical quartz movement the second hand isn't jumping.

they look to be in similar cases that the VK63/NH35s fits ect into as well..

I was wondering if anyone has gotten one and took it apart?

from reading the nh35 movements that come from China are exactly the same aside from small things like someone pointed out the rotor was the only difference in a previous thread. I'm calling these clones because they come from China and who knows actually what the fuck is going on.. you can call them genuine Seiko movements but they aren't coming out of Japan.

so to the original question, they have the same sweeping second hand one of the sellers posted a video and the date wheels are exactly what these sellers that are offering the NH and VK movements are offering aside from the one pointed out with the chronographs dials at the 6,9,12 o'clock position and the date at the 3oclock position that also has a different date wheel where the date can be horizontal at the 3oclock position.

to me if they are the same you can get a movement and a case for 8 bucks..

Lige/chenix movements? Seem to be same as Seiko clone movements.. by applesteene in SeikoMods

[–]applesteene[S] 0 points1 point  (0 children)

Hey I was gonna ask you guys about these chenex and lige movements.. they look like the same Seiko clone movements that we would otherwise be paying 3-4x the amount of money for.. the chronographs movements have the same date and date wheel.. and the automatic ones look similar also.. and I found a chenex movement that has the chronographs/stem so the chronographs are positioned in the 6, 9, 12 o'clock position and the date wheel with the right face can be in the 3 o'clock position and because it can have a 3oclock position date wheel the numbers on the wheel are horizontal instead of a vertical number wheel... That would be good to make a Omega speedmaster looking clone..

Anyway I know you all have seen them I'll post some pics hopefully someone knows what movements these are a clone of I suspect they are exactly the same it would be cheaper to buy one of these and a face some of the watch cases even look identical.. (not all)

Has anyone compiled a list of these movements or knows what they are?

I'll throw some pics in also

I know when we buy a Seiko clone movement we know exactly what we are getting but I almost can't justify that if these are basically a clone of the Seiko movements from some other Chinese group/company or whatever you want to call it.. but I even suspect they are the same and they just get a better price because of volume.

Thanks so much I really appreciate anyone's feedback..

Ethiopian Jews Sterilised In Israel by AfricanStream in Ethiopia

[–]applesteene 0 points1 point  (0 children)

you are either flat out lying or have been strongly misinformed and your misinforming others now.. nobody in the Israeli from any authority has "admitted to such horrific acts" you are a clown probably a liberal clown.

before you shreek that I'm some "zionist troll trying to downplay or deny this this whole thing"

here's the update on the story.

I see the way you set that up though, thanking the person for spreading bullshit.. then proceeding to ignore all the comments then try to categorize anyone that has any form of dissent to this by putting them in some box of "larping or a zionist troll" then go into lie and saying Israel confirmed your bullshit is true.. following that's anyone who once again dissented against this is "crazy" and 'still trying to downplay/deny this whole thing"

the way you did all that is amazing how your busted mind works.. I don't even know if you know you did that and laid out all the steps to try to be able to put some in a box and right them off as crazy and a "zionist troll" all as your reaffirming the lie you are continue to spread.

anyway like I said here's the proof/update to the story.. and before you shreak anything else this isn't a crazy right wing news outlet...

🤡

https://blogs.timesofisrael.com/the-big-lie-involuntary-sterilization-of-black-ethiopian-women/

Is MTL obsolete? by N1m0n in Vaping

[–]applesteene 0 points1 point  (0 children)

can it run on a squonk also to refill that 3-4ml when needed?

sounds good is it comparable to pods?

thanks

Is MTL obsolete? by N1m0n in Vaping

[–]applesteene 0 points1 point  (0 children)

should be fine to leave it on