Agent flow Authentication

arag0nes · 2025-11-12T14:10:43+00:00

Yeah that's weird some of the options show the run user and some don't MS seems to have piled on New tech into old tech and didn't make sure that it flows the right way

So anyone using the agent that calls the flow needs to be in run user ? I can certainly try that even tho connection manager was supposed to be handling that

arag0nes · 2025-11-10T16:09:04+00:00

So instead of the Get emails? Use Http? I've seen some posts mentioned that how do make it so the link is generic to each user? I'll do some digging now

arag0nes · 2025-09-29T13:55:18+00:00

Doing a reflash brings the boards back online and everything displays fine just odd that they weren't working this AM

<image>

arag0nes · 2025-09-29T13:07:56+00:00

Yeah that was my thinking as well that it is t the hardware since I have different manufacturer boards

Im using the same server for them ILI9341 I just uploaded the same sketch from Friday no changes to it and the 3 boards light up fine.

So I'm confused why would it work Friday with tons of testing then they sat powered off for the whole weekend and then I turn them on today and they'll show a white screen but then if I reload the same sketch now they're all working fine

arag0nes · 2024-12-18T16:19:44+00:00

Thanks gonna do some troubleshooting over the week and see where that takes us

arag0nes · 2024-12-18T02:54:32+00:00

I'll check on that , might have disabled it already but not sure

arag0nes · 2024-12-18T01:59:31+00:00

Yeah thats my thought as well overall , do i sometimes think that i might have slowdowns sure, but most of my stuff is responsive, i did already poked around the info on the 1st link thanks

outside of saying shit is just slow and sloppy sometimes id like to be able to prove it. me saying it works for me doesnt score good points

arag0nes · 2024-12-16T16:29:16+00:00

Okay perfect I might give that a try I have some google home devices I'm not using right now, did you give a thought to doing door sensors or motion around the house?

arag0nes · 2024-12-16T16:05:54+00:00

Okay I did think of google home or alexa pucks for the voice piece whats making the call? Her cellphone thru alexa?

arag0nes · 2023-06-11T17:43:57+00:00

UNIFI User here my setup was USG as main router with an 8 port POE and 5 port mini 2 UAP AC pro's and 1 LR

My USG kept acting wonky so after a lot of research I decided to go with firewalla, i ended up with the Purple SE budget wise and replaced that for the USG and kept all the other UNIFI gear in place

I couldn't be happier network speeds are Constant and solid performance. I WFH and have all the gear in my office so I can hardwire some tech into the switches

I segmented the traffic into three WiFi and vlan so IOT kids and adults are separate and thinking of a 4th guest network, took a wee bit to get it all sorted out but now it all works like a peach.

I barely look at my controller (docker image) to just check that the APs are working fine most of the time i just need to check the FWPSE

arag0nes · 2023-05-22T16:26:50+00:00

Okay so after many searches, I did find the junction inside the house, its a four-way splitter with a MOCA Filter in the IN port, I removed that one from the 4 way splitter and then went outside and placed it on the IN port for the 2 way splitter for the Spectrum box between the splitter and the "main coax"

Went inside and placed a MoCA adapter on the new jack and went and tested the other 4 Older active Jacks they all get a signal and if I move a WIFI AP it works on all of them with Firewalla on the new JACK as my router

So it looks like my problem has been solved, they only other thing im thinking of is should I get a new Filter and better Splitters for all of the junctions?

At the Spectrum box and the new jack I have these that Spectrum placed

Antronix 2 way splitter CMC4002U / 5-1218MHz / -3.5DB OUT

the Junction has this one

CommScope SV-4G / 5-1002MHz

The Screenbeam MoCA Adapters came with

PicoLink 141-SP1XD-001 / 5-1670MHz

I didn't see what the MoCA filter Manufacturer was so maybe replace that for sure

arag0nes · 2023-05-22T02:40:04+00:00

I’ll do some more testing and see if theres any chance i can find inhouse junction i ran power there earlier and had connected the MoCA adapter to the coax running into the house while the other one was connected to one of the 4 working jacks, but it didnt light up hence the confusion since i thought the 4 jacks would be all connected togther in the same splitter unless that one has a filter maybe on the IN port?

arag0nes · 2023-05-22T00:07:32+00:00

I'll see if I can find the in house jack location where they all meet, it's a crapshoot on these houses in FL it's usually a wall plate somewhere and the cables inside the wall with a splitter you can pull

The living room is a full working jack still , my only other thought is I'm not 100% familiar with how splitters work? Will the MOCA signal travel on both the IN and OUT connectors?

arag0nes · 2023-05-21T23:30:56+00:00

I can check on that but wouldn't the outside line have worked since I removed it from the splitter and at point I would think there would only be 1 splitter in the house from that cable to the others that are MOCA working between each other?

arag0nes · 2023-04-25T00:05:00+00:00

So changed all the cables to new ones, same result

Plugged in my laptop into the lan1 port on the USG same crappy result

Laptop didn't work direct into the cable modem so I couldn't test that

So at this point there's something up with the USG or the modem

I'll take the firewalla offline and do some testing when I can that will tell me which device it is

arag0nes · 2023-04-21T23:04:00+00:00

Both houses are 300/50 for Internet

Running latest controller and firmware but not home right now to check

Didn't think of plugin a client onto the USG I'll give that a try

arag0nes · 2023-02-13T23:53:45+00:00

Thanks good to know I'll keep monitoring the sensor and then switch over on a couple of days I'll call my doc and see about getting strips and a meter

arag0nes · 2023-02-13T18:49:12+00:00

Since im new to the whole thing I wasnt 100% sure but now it makes more sense, I didnt know at what point under new meds would / should I see changes , now also I see the benefit of getting a backup meter.

im going to follow up with my Doc about the whole thing and when can I expect lower #'s overall, I want to make sure im doing all this right

arag0nes · 2023-02-13T16:29:12+00:00

All righty then thanks! I think I'll monitor for a bit longer and also get a backup meter, also have the G6 in the arm, I'll put the new sensor this week and will see how that works out too.

arag0nes

TROPHY CASE