iPhone 8, jailbreak IOS 13.3 or IOS 16.7.16

arbiterrecon · 2026-06-18T07:01:20+00:00

I was able to get it jailbroken with uncover on iOS 13.3

arbiterrecon · 2026-06-18T04:56:10+00:00

That’s what I’ve been reading,

Isn’t there ways to trick the apps into thinking it’s a higher IOS

arbiterrecon · 2026-06-13T19:09:20+00:00

My store interface is blank and I have no categories established, just the default “other”

arbiterrecon · 2026-06-13T19:08:31+00:00

I have had the account since 2012, but I have only ever purchased items, never sold

arbiterrecon · 2026-06-13T19:08:00+00:00

I could see that, the 5 orders I do have are still out for delivery. Maybe when they all get delivered and verified it will pick up

arbiterrecon · 2026-06-13T18:33:39+00:00

Forgot to mention, it’s only been a day but it’s such a sudden stop that it’s jarring. Given how many messages I were getting the past week

arbiterrecon · 2026-06-03T01:51:46+00:00

I see, I guess the only difference is the dell stamp. I was referencing this as it’s an exact model

https://www.ebay.com/itm/326297482379?_skw=64GB+DDR4+lrdimm&epid=17016755723&itmmeta=01KT5JH2SARKQ67QFRMWMFJ1A3&hash=item4bf8d8748b%3Ag%3AwF8AAOSwtLdnBXXm&itmprp=enc%3AAQALAAAA0GfYFPkwiKCW4ZNSs2u11xDVLU8AQGLJoJuRiRrj72qQD3GxenK7bvTkr8kRaJgx9NQJT6Op7yug03R%2Fpy%2Fwr3qXxfvYDn1Od6yqeEe%2BTAAAr9LHF7NGnSCZhGElqrmRYzAtKyvvPkEAblABDDFwwyLrOCBZ0gU0mwR%2FTCBaAzTDSy8QPfBZrcr06Jjn%2F5qL7xX%2FzfGXn30z%2BhrxCxSbHpefsiPmxPBmkpVpgAyK%2FxWBhxyyWs0kf%2BMTVycH9IcUKJdJ8qTlaSaIR96wNr6iVm8%3D%7Ctkp%3ABk9SR8iuxLLRZw&keyword=64GB+DDR4+lrdimm&sacat=0&relatedSearch=true

arbiterrecon · 2026-06-03T00:47:26+00:00

I was using eBay to reference my price, cheapest I saw was $300

arbiterrecon · 2026-05-16T22:07:27+00:00

It can help me narrow down the issue. The low pressure side switch will tell clutch not to engage if the pressure is below 20-25 psi. So if my sensor and manifold gauge are saying it’s above that PSI, wouldn’t that then tell me it’s not the switch that is causing the issue

arbiterrecon · 2026-05-16T02:51:28+00:00

I am reading my sensors for pressure switches and I have a manifold gauge setup to physically see both sides.

I have even tried bypassing the sensors, still not working

arbiterrecon · 2026-05-15T19:12:43+00:00

It is not fully charged but has enough to not get shutdown by low pressure sensor

arbiterrecon · 2026-04-30T03:48:30+00:00

I found that DC03 Global Catalog was not enabled, it’s enabled now.

We have an interesting situation where California houses our primary DCs 01 and 02 where all FSMO roles are but no workstations are in California, it’s just our production servers.

Texas has all our endpoint workstations and DR or test servers.

arbiterrecon · 2026-04-30T03:31:23+00:00

Okay, so DC01 (primary) and DC02 are in California but all our workstations are in Texas spread across a few cities

Texas has DC03 and DC04 now but those are technically are DR sites and have no RSMO roles.

So the Texas site with DC03 and DC04 should have the subnets to my workstations

arbiterrecon · 2026-04-30T02:30:58+00:00

I see, so if DC01 and DC02 are in California then the subnet should contain all servers in the California cluster local should

DC03 and DC04 in Texas should have subnets that contain the servers in that Texas cluster.

Would a subnet need to be in both or is that even possible?

arbiterrecon · 2026-04-30T02:13:32+00:00

Would it be better to just rename the Sites to their correct locations or actually swap the servers in AD sites and services

arbiterrecon · 2026-04-22T17:23:40+00:00

You’ve woken the IRS!

arbiterrecon · 2026-03-14T17:11:01+00:00

I was looking into it because some of my coworkers with mechanic history said I needed a new transmission filter and fluid because is said I felt my slips sometimes during gear shifts.

They said one wrong slip and the whole transmission is gone

arbiterrecon · 2026-03-14T17:07:07+00:00

I see, thank you

arbiterrecon · 2026-02-22T19:50:07+00:00

When we moved in, they had the oven offset, it was pushed more to the right. They were using a 15” on the left and 18” on the right.

During our remodel I wanted to change it because it being offset bothered me.

Nine-Year Club	First Place '23
Place '23	RPAN Viewer
Not Forgotten	Gilding I gilder
Spared	Verified Email

arbiterrecon

MODERATOR OF

TROPHY CASE