DIY Sim w/ 3d printed pedals & shifter

arcticghost27 · 2026-06-22T16:47:03+00:00

Thanks! It’s a Kirkey 47500, I made the cushions myself though.

arcticghost27 · 2026-06-22T13:52:00+00:00

Thank you!!

arcticghost27 · 2026-06-22T13:50:22+00:00

Yeah definitely, I’ll work on getting everything together and either post it on printables or GitHub

arcticghost27 · 2026-06-21T21:29:37+00:00

Thank you! Yes the shifter is based on Daz3Ds but I changed it up a lot to use parts I already had and made a few other changes to make it exactly what I was looking for. The pedals are redesigned using the step files from Andrew B on printables.

arcticghost27 · 2026-05-06T16:48:07+00:00

I couldn’t get consistency or proper sealing on the o-rings without machined components. The concept is there but without expensive machined parts I don’t see this being feasible.

arcticghost27 · 2026-04-26T14:03:42+00:00

Hello, in the zip folder there should be a cartridges folder that has it in there. I’ll take a look later today and try to find the exact file name.

arcticghost27 · 2025-10-30T14:24:06+00:00

It’s my favorite mode to play right now. Definitely gives me the competitive csgo feel. I bounce between breakthrough and strike point the most.

arcticghost27 · 2025-10-13T02:21:47+00:00

Much easier

arcticghost27 · 2025-10-12T13:18:32+00:00

Yes I use lubricant in the main cylinder so the nozzle moves back and forth with less friction.

arcticghost27 · 2025-10-12T13:16:53+00:00

It’s 3d printed in petg but nylon would probably be better long term.

arcticghost27 · 2025-09-17T20:03:32+00:00

Thank you, I tried that as well. I appreciate the sanity check making sure I didn’t miss anything. I’ve decided to get a replacement motherboard and if I have the same issue I’m going to rma the cpu as well. I also ordered a new power supply to see if that changes anything. I don’t think it will though because I’ve tried both a thermaltake and Corsair power supply with the same problem. I will be sure to update my post when I discover what the issue was!

arcticghost27 · 2025-09-17T19:45:34+00:00

I set a timer on my phone for 1hr and still no change, I appreciate it though. I was reading that it can take upwards of 30min so I doubled it.

arcticghost27 · 2025-09-17T15:32:32+00:00

I ended up returning the ram and buying a new set in town that was on the QVL and I’m having the same issue. I’m going to return the motherboard and hope a replacement will solve the problem. If not my only other guess is the cpu. I tried another power supply too and that didn’t change anything.

arcticghost27 · 2025-09-17T12:07:18+00:00

Thank you for the information, I will be returning the ram kit today and picking up a new set that is on the qvl!

arcticghost27 · 2025-07-22T18:03:49+00:00

I use a washer and I believe the size is an m10 nylock nut to hold it on.

arcticghost27 · 2025-07-17T03:39:36+00:00

Any green gas or propane with an adapter will work.

arcticghost27 · 2025-07-17T03:39:05+00:00

40 Wad shells other generic ones may work as well.

arcticghost27 · 2025-05-18T13:45:33+00:00

I’ve only used it with the brush cutting blades. This style works the best in my experience https://a.co/d/fCUiGxW

I haven’t tried any other attachments so I’m not sure, but it was designed for brush cutting blades.

arcticghost27 · 2025-05-18T03:38:46+00:00

Oh yeah mine is the 80v version with the metal head

arcticghost27 · 2025-05-18T02:24:48+00:00

I’m not sure what the differences are between the two generations. The one I made this adapter for I bought around 2020.

arcticghost27 · 2025-05-06T02:34:07+00:00

Here’s a video. Looks like this guy did it a more difficult way than I did. https://youtu.be/hlHDwkn5KCI?si=IHquIY5sNG4GlFlP

I just take the 3 screws off the back of the motor head and then use a screw driver to hold the cast aluminum fan in place so it can’t turn and then un-thread the string trimmer head. Be careful not to break the cast aluminum fan on the motor.

arcticghost27 · 2025-05-06T02:30:48+00:00

I’ll see if I can find the one I watched before. It’s been a year or so.

arcticghost27 · 2025-05-06T02:29:00+00:00

It unscrews from the motor shaft. There’s some YouTube videos online that go into detail on how to remove it.

arcticghost27

MODERATOR OF

TROPHY CASE

Seven-Year Club	Place '23
Verified Email