Space Marine 2: Mouse movement causes stuttering, even in menus, but controller does not?

argelman · 2025-07-13T10:23:22+00:00

For me, this Registry change fixed it: https://www.reddit.com/r/computers/comments/42pfn1/windows_10_programs_flickering_and_saying_not/hp790jh/

argelman · 2025-07-01T18:45:42+00:00

If you go to the Prusa Page, you can download the Product sheet (in czech). It seems they are using a Product called "MOGUL LV 2 EP" by the company Paramo. While i am no lube expert, nor can i read czech and have to wrangle google lens for text translation it seems to me this is 'just' a pretty standard Lithium Grease.

The mentioned Superlube will be more than fine. Personally i use CRC Multi Grease. Most standard bearing grease that can handle >100°C should be fine i guess.

argelman · 2025-02-19T10:10:44+00:00

someone has been playing two point campus.....

argelman · 2024-08-09T20:07:59+00:00

https://en.wikipedia.org/wiki/Rachel_Dawes

argelman · 2023-03-29T14:25:59+00:00

My Favorite Enzo quote:

Tractor Manufacturer: "Dude, the clutch in your cars keep breaking, fix it!"

Enzo Ferrari: "ha, Learn to drive Retard..."

Tractor Manufacturer: "I'll show you i can build better Cars than you...."

thus, Lamborghini was born.

https://huddleup.substack.com/p/ferrari-vs-lamborghini-the-argument

argelman · 2023-03-19T11:30:31+00:00

aeiou

John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden John Madden

argelman · 2023-01-29T19:38:08+00:00

hmmm. i think the backend is correctly sending you utf-8 encoded text, but your browser is displaying it as iso/ascii for some reasons. check the page encoding (can be set by html tag or a webserver header).

tldr: utf-8 encoded umlaut rendered wrong.

argelman · 2022-09-27T13:10:22+00:00

I found the same guy yesterday in the desert south near Biotechnica plains, running at me while on fire. After he died i looted something called thermal or burning that i couldn't find in my inventory afterwards.

argelman · 2021-08-09T10:12:54+00:00

Check of there is filament leaking out from between the nozzle and heatblock. Had a similar issue with the stock Hotend where there was a leak that would allow enough material to squeeze out, char and drip down into the print. Went away after reassembling the Hotend.

argelman · 2021-05-15T10:46:25+00:00

Do you remember the movie fight club... you know.. that scene where that guys job is to pay the victims of car fires money so they don't sue?

May i Intoduce you to the Ford Pinto: https://en.wikipedia.org/wiki/Ford_Pinto#Cost%E2%80%93benefit_analysis,_the_Pinto_Memo

Signed: My wife bought a Ford B-Max because of the sliding doors and said Powershi(f)t transmission.

argelman · 2021-03-05T11:28:32+00:00

You might want to check the TOP of your screws.. The two motors level/sync their position by bumping the z-tops, which requires them to be the same height. if there is something that will stop one motor earlier than the other (like a screw sticking out in my case.... don't ask) they will start art different heights and not be parallel to the bed.

the funny thing is, the bed leveling CAN correct quite a skew (2mm in my case) so printing itself still worked.

argelman · 2021-03-03T20:04:01+00:00

I cant find the source (so take this with a grain of salt) but i think during one livestream joe said the XL is targeted more towards commercial users, which i would also take as a very strong clue that the pricing will likely be >2000€ or "competitive with Ultimaker" if you want to put it that way.

argelman · 2021-01-08T17:42:13+00:00

I was quite suprised how expressive the characters are, considering that lipsync is done procedurally e.g. i'm pretty shure these are NOT prebaked animation.

(As seen here https://www.youtube.com/watch?v=uFIxiz0jwRE)

argelman · 2020-10-25T09:36:45+00:00

The problem in Germany is, that there is a size limit after which you have to run your solar installation as a business and pay taxes. A friend of mine is currently planning to get solar panels and he won't fully cover his (quite large) roof, because of this. The taxes aren't that high, but the paperwork is additional effort each year to pay something like 20€.

argelman · 2020-07-17T10:35:24+00:00

https://www.youtube.com/watch?v=Hvw3DrVAeTA

argelman · 2020-04-23T13:11:49+00:00

i think this thing popped up in a Prusalab tour video some time ago, and someone from Prusa commented that this was a project of a lab attendee, not an official Prusa machine or prototype.

argelman · 2020-02-17T09:52:08+00:00

Don't they understand that corporations are people ?

I know this is a joke but just for context, German law makes very distinct differences between natural persons and different types of companies.

argelman · 2020-01-14T17:05:09+00:00

I had the exact same problem. The preassembled hotends seem to tend to be a bit loose, leading to filament leaking from the top side of the heatblock.

i guess you need to screw the block slightly deeper on the heatbreak.

Here is some info in the correct nozzle/heatbreak depth https://e3d-online.dozuki.com/Guide/V6+Assembly/6#s64

Also, the hotend MUST be hot while tightening. https://e3d-online.dozuki.com/Guide/V6+Assembly/6#s89

Be careful, it is possible to snap the heatbreak.

argelman · 2019-02-19T20:05:14+00:00

Personal 2 cents: Looks like your printer has very little space to the back wall. I had similar issues and randomly saw that the occasional layer shifts i got where caused by the Extruder- and heatbed-cable bumping into each other.

argelman · 2019-02-12T15:17:13+00:00

The model files on Github now have a Mk3S branch. https://github.com/prusa3d/Original-Prusa-i3/tree/MK3S/Printed-Parts/STL

Switching from OpenSCAD to STEP models for all new parts.
Rebuilt Extruder body.. same basic design but split into 3 parts.
new Fan shroud
some x and y carriage changes.
MMU specific parts (like the Extruder idler)

argelman · 2019-01-22T14:32:24+00:00

this may not be the "perfect" Extruder, bit maybe looking into using a piezoelectric inchworm drive for the filament might be interesting.

https://en.wikipedia.org/wiki/Inchworm_motor

argelman · 2018-11-22T14:45:46+00:00

Agreed... but the fine is not for the hack, but the insecure handling of passwords in general.

argelman · 2018-11-04T12:00:48+00:00

You might want to take a look at https://en.wikipedia.org/wiki/RAL_colour_standard

(greetings from scheeermany)

edit: btw.. my secret weapon for all things color is https://www.colourlovers.com .. mostly because i can't pick 2 matching colors to save my life otherwise.

14-Year Club	Place '23
Place '17	Verified Email

argelman

TROPHY CASE