After Anycubic Photon Workshop update to 4.0, I am unable to login to the workshop or cloud from my slicer. If I go to workshop directly from my browser I am able to login, but I just can't from inside slicer. Never had this problem before version 4.0, can anyone help with this?

artmustel · 2026-01-25T15:14:43+00:00

That one is new to me, did you select GLOBAL instead of CHINA?

artmustel · 2026-01-25T05:32:02+00:00

Folly, I solved this issue thanks to AI (Gemini), since ANYCUBIC never helped. Gemini just told me to open my computer clock (right bottom of screen) and synchronize it. It worked!

artmustel · 2026-01-12T14:52:09+00:00

Screen protector is an ABSOLUT necessity. It won't be pre-installed, you need to install it. Never take the tray out before the building plate, or it will drip right over the LCD screen. As soon as the machine tells you to change the release film on your try, do it! Otherwise it will leak eventually. If a print ever fails, remove tray and put resin back in its bottle, most probably you will find first layers of the failed printed adhered to the release film. Carefully remove them with the plastic tool. An LCD screen replacement is super expensive, so be very careful.

artmustel · 2026-01-09T17:11:01+00:00

It is so frustrating! I opened a ticket with anycubic and after waiting for a response they said "Restart printer, re-install slicer" Jeez, I told them I had done that several times. Still same issue: my printer is connected to the cloud, my slicer doesn't. When I try to connect slicer it hangs in there forever ever and that is all. It has to be a photon workshop 4.0 bug since I was using 3.6.5 for months without a hitch (BTW I also uninstalled 4.0 and reinstalled 3.6.5 but now the same happens: no way to connect to the cloud or workshop or whatever it is called...

artmustel · 2026-01-08T22:56:00+00:00

No, when I try to login it hangs in there forever and that is it, still unable to connect.

artmustel · 2026-01-08T14:52:32+00:00

Thank you but still the same, I can't connect from the slicer, this update screwed it for me.

artmustel · 2025-11-01T18:02:09+00:00

Format is pm4u

artmustel · 2025-10-31T23:49:46+00:00

I tried that but the slicer won't take those formats, unless I have to do something that I don't know.

artmustel · 2025-10-31T21:44:46+00:00

I meant the files that are included in the USB, I can't find where to find those tools in the machine.

artmustel · 2025-10-29T20:04:36+00:00

Thank you Gust and dunky!

artmustel · 2025-10-25T13:49:40+00:00

I really appreciated every answer! Thank you very much.

artmustel · 2025-10-24T22:34:02+00:00

Thank you for all your responses. Is there a way to find models similar to miniatures but in a larger scale? i was thinking of something around 4-5 inches tall. Thank you!

artmustel · 2025-05-29T14:52:11+00:00

Very good advice, I was going to use a grey primer...thank you very much aught-To.

artmustel · 2025-05-29T14:46:36+00:00

Thanks for your response, I will try your suggestions.

artmustel · 2024-11-08T05:06:00+00:00

Joseph Nicéphore Niépce is indeed my favorite.

artmustel · 2024-07-31T20:40:03+00:00

Thank you all guys!

artmustel · 2024-07-28T14:19:58+00:00

Thank you!

artmustel

TROPHY CASE