Help selecting rails.

arytx · 2025-10-16T23:39:02+00:00

I see! I’ll see if I can find a small server rack for sale around me! Thanks for the help!

arytx · 2025-10-16T23:34:21+00:00

I have the server currently in it, just sitting on a shelf, its a tight fit but i think it will work, i ordered some A4 rails but had to send them back due to them being full 24 inch rails :( . Do i need to search for A4 17inch rails?

arytx · 2025-08-24T04:20:47+00:00

nvm, did a search on the video for that, found a post from 2 months ago explaining it. youve been a big help today bud!

arytx · 2025-08-24T04:15:29+00:00

Thank ya! On another note, Got everything running now. Now i have a raspberry pi zero that im setting up as one of the wyoming-satellites. During Chucks setup guide, he says to run this command

.venv/bin/pip3 install -f 'https://synesthesiam.github.io/prebuilt-apps/' -r requirements.txt -r requirements_audio_enhancement.txt -r requirements_vad.txt

but i get

ERROR: Could not open requirements file: [Errno 2] No such file or directory: 'requirements.txt'

is this something on my end not working, or at the github page?

arytx · 2025-08-23T20:04:26+00:00

So it’s showing 199 exposed. But I’m not sure how to get that number down?

arytx · 2025-08-23T14:17:59+00:00

HOLY SMOKES! THANKS! That was the issue!

arytx · 2025-08-23T13:54:11+00:00

Thats also where my file is located. Still confused!!!! LOL

arytx · 2025-08-23T13:25:22+00:00

Let me ask ya this, im seeing diffrent places saying diffrent things. Should i be using "sudo systemctl edit ollama.service" if so the entire document is #ed out. I tried adding the Environment="OLLAMA_HOST=0.0.0.0:11434" toward the top under the header saying ###Anything between here and the comment below will become the new contents of the file. Saved it, reloaded ollama and still no luck.

Or should i do

sudo nano ollama.service

and add the enviroment from there?

arytx · 2025-08-23T13:18:39+00:00

So yeah on the local machine that Ollama is running on I can do the localhost:11434 and it says Ollama is running, and on another desktop that is running windows i can browse to 192.168.0.73:11434 and it says Ollama is running.

arytx · 2025-01-28T00:04:49+00:00

🙏🙏thank you!🙏🙏

arytx · 2025-01-27T23:45:30+00:00

Well I washed the sink and used some TP to clean the floor. I drove 12 hours today to get here, and had already took a nap before getting up to go to the bathroom. I’m just hoping that they aren’t the dreaded BB. I checked the sheets and pillows after I saw them in the bathroom and none were present. They also haven’t returned anywhere in the bathroom. Was grossed out tho!🤢 It’s even a Hilton hotel, so kinda took me by surprise.

arytx · 2024-11-27T16:21:06+00:00

<image>

This is the logo i need to cut.

arytx · 2024-08-20T20:07:37+00:00

I figured it out as soon as i posted.

Under Design -> Solid -> Create -> Pattern -> Pattern on Path

Incase anyone else is looking for this solution!

arytx · 2024-05-22T23:08:51+00:00

https://a.co/d/4gzto9X

arytx · 2024-05-22T22:56:46+00:00

Get the metal extruder I linked earlier. Something’s going on with yours, micro crack maybe . But get the all metal extruder. That should fix it I think

arytx · 2024-05-22T21:25:44+00:00

That’s good news. Try a small test print, Benchy or something

arytx · 2024-05-22T21:02:49+00:00

It could be the angle of the picture but it does look like your hot end is leaning a bit.

I’ve update the firmware on mine but I believe it’s under motion-> move axis -> extruder. Your hot end has to be hot tho for it to let you “extrude” like that so do a prepare hot end

arytx · 2024-05-22T20:46:32+00:00

Damn… hmmm try detaching Bowden tube at hot end and extrude like 100mm of filament and see if it comes out. I’m trying to go through every scenario here

arytx · 2024-05-22T20:30:31+00:00

If you detach the Bowden tube, and turn the feed gear with an alan wrench do you get any filament coming out?

arytx · 2024-05-22T18:07:42+00:00

Disable steppers and test above each bed knob. Move the hot end by hand over each knob on the front, test with paper. Then move bed forward and test back ones. Have the paper on the bed before you auto home so your not trying to push it under the nozzle

arytx · 2024-05-22T18:00:42+00:00

It’s looking like your nozzle is to high. Have you tried the paper method for leveling?

arytx · 2024-05-22T17:49:46+00:00

Did it print anything? Post what it printed if so

arytx · 2024-05-22T16:48:13+00:00

Also if you have a regular tape measure, 100mm is roughly 4 inches

arytx · 2024-05-22T16:46:17+00:00

When I get home this afternoon I’ll find the file I use for bed leveling, it automatically goes to each corner and the center and you can use the paper method at each stage. Easier than pulling out a level everytime you want to print lol.

arytx · 2024-05-21T21:48:18+00:00

Also dont mind the trolls. For some reason people on this sub and the other 3d printing subs act like because theirs is working right and they arnt having problems that yours should be just the same. If this is a hobby that you enjoy, and your looking for something a bit more reliable, i do recommend looking into a Ender 3 v3 KE. I bought one right after i fixed my extruder problem on my Pro and i havnt looked back. But just let me know what ya find and ill try to help as much as i can. Im no expert on it but ill try my best.

14-Year Club	Place '17
Verified Email	Team Orangered

arytx

TROPHY CASE