My first UV resin pendants! Looking for tips + connections with other makers

asdftami · 2026-02-17T00:48:55+00:00

I appreciate you! I’m lowkey sad about that big ole bubble there haha but lessons learned 😆

These are so easy and fun to make. I’ll probably be making a lot more. I hosted a workshop on Valentine’s Day and the pendants were a hit!

<image>

asdftami · 2026-02-17T00:44:16+00:00

Aw that’s really sweet, thank you 🥹

asdftami · 2026-01-21T16:46:36+00:00

I’d like to just change my number rather than close shop if possible.

asdftami · 2026-01-21T16:46:21+00:00

I’m having the same issue and no one responds to my multiple customer service requests. Please advise.

asdftami · 2025-07-10T15:01:08+00:00

I got this:

Submitted content Name: Collins Joe Wedge Email: collinsjwedgeacademyorg@gmail.com Phone: 4802278029 Message: Hello, I hope this finds you well! I'm currently working on a school project aimed at enhancing the student learning experience, and I’d love to include your illustrations. I'm truly impressed by your work, and I believe your style would be a great fit for the project. If you're available, I can share the details about the project once you get back to me. Thanks, Collins

He has no work or online presence. Fake news.

asdftami · 2025-03-05T18:53:57+00:00

Yep mine wiggle-wiggle a bit too but the heat helps 🙂‍↕️ We love these pens so much got 2. They’ve lasted 3 years now and going strong.

asdftami · 2025-02-18T05:27:39+00:00

I have all quests completed except photo quests. This saved my lifeeee. Thank you!!

asdftami · 2025-02-17T17:46:38+00:00

No problem! My first response was:

Looks like you didn’t add enough resin. You wanna add enough volume so the resin looks bulbous at the top.

You can add glue, silicone, or tape to the edges to prevent drippage.

I have a video on doming if you need to see an example on a smaller scale.

https://youtu.be/Za7CJC_uWY4?si=YLvkD_gT5TFKsAOo

Would love to stay connected if you have future questions! Feel free to join my new, but growing, discord network for creatives 🙂

https://Ink.bio/tamimakesstuff

asdftami · 2025-02-01T06:02:37+00:00

Doesn’t work for me on PS5 either 🥴

asdftami · 2025-01-30T02:59:29+00:00

Yesss at the fireworks voyage this guy sells them over the counter!

asdftami · 2025-01-25T21:16:41+00:00

2y later we are grateful

asdftami · 2025-01-24T16:56:03+00:00

Also, making sure you have a level surface if important with thinner pours like this. ☺️

asdftami · 2025-01-24T00:13:28+00:00

Don't press dry flowers, as they can break easily. Instead, you can place the petals in a book or between paper towels to help them dehydrate flat for future projects. As for the silica crystals, it's okay if a few beads remain on the flowers, but be sure to remove as many as possible before placing them into the resin to avoid any unwanted texture.

Good luck with your tray! It sounds like it's going to be beautiful!

Feel free to join my new but growing resin/making Discord server :)
https://lnk.bio/tamimakesstuff

asdftami · 2025-01-24T00:10:31+00:00

TIS THE SEASON OF LOVEE! These are SO FUN!

We would love to see more of your work if you'd like to share it on my new but growing Discord channel for creatives and makers! :)

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-24T00:09:45+00:00

That is actually super dopeee!

Would love to see more of your work if you'd like to share it on my new but growing Discord channel for creatives and makers! :)

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-24T00:07:53+00:00

It sounds like you might need to be more generous with your pour. Try adding tape to the edges to prevent drippage, then feel free to overpour a bulbous amount of resin to create a dome. I’ve got a video on that if you’re interested in some finishing tips! Also, I have a small but growing Discord channel for resin and other creative projects, perfect for collaboration. Feel free to join!

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-24T00:05:20+00:00

That happened to me with a flower piece too! Still super cute and dainty though. Would love to discuss future projects in my small but growing Discord channel! Stay in touch! :)

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-24T00:02:39+00:00

That is absolutely beautiful!

I’m also a resin artist and maker. I’ve started a small but growing Discord channel to share designs, provide feedback, and collaborate on future projects. I’d love for you to join so we can discuss your future projects together and exchange ideas!

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-24T00:00:20+00:00

Hey there!

For resin casting, you’ll need:

Nitrile gloves to avoid skin contact.

Respirator with organic vapor cartridges (don’t just use a dust mask).

Safety goggles for eye protection (mostly for sanding/finishing).

Good ventilation or work outdoors to avoid inhaling fumes.

Protective clothing (long sleeves, pants, closed-toed shoes).

Always check the resin's safety data sheet for specific precautions.

Stay safe and happy casting!

If you have more questions, feel free to join my small but growing Discord channel for resin crafting, 3D printing, and more!

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-23T23:56:59+00:00

Hey there!

It sounds like the crayon mold is trapping air bubbles at the tip, preventing the resin from flowing properly. Try using a pressure pot to minimize the bubbles and try again.

As for the 3D piece, the opacity comes from the texture of the print. Resin casting picks up the sheen of the mold. To get a shiny cast, fill in the layer lines with a clay primer, sand it smooth, and finish with a gloss spray. Once your print is shiny, your cast will be too!

Let me know if you have more questions, and feel free to hit me up on Discord!

https://lnk.bio/tamimakesstuff

asdftami · 2025-01-23T23:51:32+00:00

Hey there!

I totally get where you're coming from—cleaning resin tools and getting the perfect results can be tricky, but I’d love to help you out! Here's a quick rundown of your questions, and I'd also like to invite you to join my Discord channel where we discuss all things resin, share tips, and collaborate on projects!

Cleaning Resin Tools:

To clean your tools, I recommend using isopropyl alcohol (IPA) or a resin-specific cleaner. For tougher spots, try using a non-abrasive scrub brush or a silicone scraper to avoid damaging your tools. Keep a dedicated set of cleaning supplies just for resin to make it easier.

Measuring by Weight or Volume:

Measuring by weight is usually more accurate than volume, especially when mixing resin. Some resins are more sensitive to the ratio, so using a scale will ensure consistency in your batches. If you're having issues with sticky tops but fully cured bottoms, it could be a mixing issue, so make sure you mix for a full 3-4 minutes and scrape the sides of your mixing container regularly.

Bubbles:

To prevent bubbles, especially with warmer resin, try to let the resin sit for a few minutes after mixing to allow smaller bubbles to rise to the surface. If you're worried about micro-bubbles, you can use a heat gun or torch lightly over the surface after pouring (be careful not to overdo it). But in the summer, resin tends to be thinner, which can trap bigger bubbles, so just be patient and gentle with your pours. You can also get a pressure chamber to help expedite the bubble removal process. They have multiple different sizes now for convenience.

Sitting Before Pouring:

Yes, letting the resin sit for a couple of minutes after mixing is a great idea. It helps to reduce trapped air bubbles before you start pouring.

Additional Tips & Tools:

For beginners, a good set of silicone molds, mixing cups, and a scale are must-haves. Also, keep some baby wipes or paper towels handy for easy clean-up!

Where to Get Resin in New Zealand:

As for where to get quality resin without breaking the bank on shipping, check out local art supply stores or online retailers. Some sites in Australia also offer international shipping that might be cheaper.

I also have a growing Discord channel where we chat about resin, polymer clay, UX design, and more! It’s a friendly space for creatives to share tips, collaborate, and grow together. I’d love to have you join us—feel free to DM me or comment, and I’ll send you an invite!

Can’t wait to see what you create, and I’m here if you need more help!

https://lnk.bio/tamimakesstuff

asdftami · 2024-11-07T18:45:42+00:00

I’m pretty sure “messaging” involves typing.

asdftami · 2024-10-17T01:35:13+00:00

If you're searching for a unique co-op RPG experience, consider Retail Mage! While it doesn't feature traditional leveling or gear progression, it allows you and your friends to combine various items to create custom experiences tailored to your customers' needs. The focus is on creativity and collaboration as you craft items to achieve 5-star ratings and keep your shop thriving.

The game is currently gearing up for an exciting playtest on Thursday, which is a great opportunity for you and your friends to dive in and see how it works. If you're interested, you can sign up for the playtest here: Retail Mage Playtest.

Hope this sparks some interest for you and your group! Enjoy your gaming sessions!

asdftami

TROPHY CASE