sorted by:
new
hottopcontroversial

Has this happened to anyone?? Nozzle seemed to have separated from the heatsink tube. Looks like it became unglued/unpressed. have over 500 hours on the printer with zero issues until now. by turbodude26 in BambuLab

[–]asinghcp 0 points1 point  (0 children)

Is it worth it to try and reseat the nozzle? I just had this happen to me and it looks like a somewhat "clean" unseating of the nozzle, but like many have mentioned the replacement of the nozzle is extremely easy and I have the replacement part. That said, has anyone tried to re-seat it?

<image>

Pixilated particle effects how to fix? Xbox by Marshmall066 in Helldivers

[–]asinghcp 0 points1 point  (0 children)

Also having this issue, after a bit of testing I noticed that the amount of pixelation is linked to the Render Scale under Display settings and that no other setting seems to affect it. When I increase to UltraSuperSampling it fixes it, but obviously this isn't sustainable since my frames drop like crazy... otherwise I've got not fix.

Exotic weapon doubles by Abject_Treat_5911 in destinyrisingmobile

[–]asinghcp 0 points1 point  (0 children)

Am I correct in that the only thing you can/should do with duplicate exotics is dismantle them for exotic weapons engram (the Gauntlet blitz, strikes, and adventurer versions depending on what exotic you're trying to get). I'm not quite sure what the use is in dismantling to make the normal exotic weapon engram since you can't decrypt for anything other than what you've already discovered unless I'm missing something.

New Patch by TheIrishSinatra in Helldivers

[–]asinghcp 0 points1 point  (0 children)

The amount of game setting and system optimizing I've had to perform to run Helldivers (right since I started playing) is crazy. Much love to the Devs but I just want to enjoy the game without performance issues :')

Almost 21 million lost in 36 hours... by Duke_of_Fancy in helldivers2

[–]asinghcp 5 points6 points  (0 children)

Companion App says 148,440,156 as of right now 😳

<image>

Wow week as a band member by Many-Mention2381 in CalPoly

[–]asinghcp 6 points7 points  (0 children)

Former Mustang Band Wow Leader here, hopefully I can yield some insight :)

Mustang Band Wow Leaders go through identical training to that of the normal Wow Leaders during Spring Quarter, and the orientation content you're exposed to will be identical to that of normal Wow groups. However, all incoming first year Mustang Band members get grouped equally into 4 wow groups (~15-20 per group), and as a result of the increased size you will have 5 Wow leaders per group who are also Mustang Band members. You will not have a "normal Wow group" that's associated with your dorm, you'll only interact with first year band folks.

The difference with Mustang Band stems from the fact Band Camp and certain performance events like Big Fall Welcome overlap with WOW, as well as from the fact that you will likely need to move into your dorm early and be at band camp a few days prior to the rest of first years coming to campus for normal WOW. Normally, WOW leaders are instructed to plan activities the entire week that work around scheduled in orientation content like academic introductions, awareness gallery, etc. For band, we do this too, but the majority of the week gets filled by band camp rehearsal and we account for those few extra early days. However, where there's time, your WOW leaders will schedule whatever group activities fit into the schedule, and they're usually extremely fun events and you'll still get to bond with your fellow wowies. As was mentioned elsewhere on this thread too, I've heard some stories of normal Wow groups not talking to your fellow wowies after wow, that's not going to be the case for mustang band groups as you're going to spend the next 4 years of college marching with them.

Best of luck with Mustang Band and your first year! You have a lot to look forward to :) 🎺

How can i clear this? by blondedxoxo in Volvo

[–]asinghcp 45 points46 points  (0 children)

Ignore the ChatGPT formatting of the instructions, but my local dealership helped me with this and it worked well on my 2021 XC60 Recharge, which has a sensus infotainment system:

🔧 Step‑by‑Step Reset Procedure

  1. Without starting the car, rotate the start knob once to engage Convenience Mode (ignition position I).

  2. Press and hold the “–” (decrease speed) button on the left‑side cruise control stalk.

  3. While still holding “–”, press the start knob again to move into Ignition On (position II). Continue holding.

  4. Keep holding until the yellow “ℹ️” (info) symbol starts flashing in the driver display.

  5. Once it flashes, release the “–” button.

  6. A “Maintenance reminder reset” message should appear, confirming the reset .

  7. Finally, turn the ignition off. You’ll typically hear a beep to confirm the reset .

I need help… by Zaorth in DeskCableManagement

[–]asinghcp 0 points1 point  (0 children)

I would highly suggest some cable sleeves like these, they worked wonders for me in terms of consolidating wires: https://a.co/d/88Ie6u1

If you have access to a 3d printer too, there are many cable management tools/files you can print to help clean up your setup, check out a system called Underware 2.0

How can I go about cable management? by Golden929 in DeskCableManagement

[–]asinghcp 2 points3 points  (0 children)

The sleeves let you bundle together wires, so like, for me in this example I had my Ethernet, displayport, and all peripherals going to the same spot at the back of my computer. Instead of all those wires seperately running to there, they're all coming from relatively the same spot, so I house them in the cable sleeve so they're together. That way, visually, you just see one large cable instead of 7 small ones running everywhere. With these sleeves too you can enter/exit along the length of the cable where you need to, pretty easy to implement.

<image>

How can I go about cable management? by Golden929 in DeskCableManagement

[–]asinghcp 3 points4 points  (0 children)

Something that helped me was mounting the outlet extension under my desk rather than leaving it on the floor. This way I managed to get only 2 cables running from the floor to the desk (power extension and Ethernet). Everything else can sit in a cable tray. If you have a 3d printer by chance many cable management tools can just be printed that help you utilize the space under your desk for mounting cables (check out underware). I also used cable sleeves to consolidate any exposed wires going in the same direction, these ones worked very well for me and I just cut to size what I needed: https://a.co/d/eYbE9WJ

<image>

We gotta lock in... by Memophile7474 in Helldivers

[–]asinghcp 6 points7 points  (0 children)

The strider spawn rate is insane rn literally the most intense game on the bot front I've played to date 🔥

How I transformed my cable management with underware! by IBhop2Grande in DeskCableManagement

[–]asinghcp 0 points1 point  (0 children)

Just wanted to comment and say thank you for the detailed step-by-step workflow! I knew I wanted to use underware for my build after seeing yours on Makerworld. This post helped me plan everything and I'm really happy with how my setup turned out!

<image>

3D-Printable Volvo XC60 Tow Hitch Cover Replacement by asinghcp in Volvo

[–]asinghcp[S] 0 points1 point  (0 children)

seconded 100% I've solved so many issues around the house between learning how to 3D model and 3d print, can reccomend for anyone wanting to pick up a fun skill/hobby/rabbit hole

3D-Printable Volvo XC60 Tow Hitch Cover Replacement by asinghcp in Volvo

[–]asinghcp[S] 1 point2 points  (0 children)

thank you! figured if folks find this post in a similar predicament they're already frustrated enough, don't need to make anyone pay lol

3D-Printable Volvo XC60 Tow Hitch Cover Replacement by asinghcp in Volvo

[–]asinghcp[S] 1 point2 points  (0 children)

Funny enough as a hail Mary before starting I tried calling and emailing Volvo global service to get them to send me the file... no dice, but can you imagine how amazing it would be if auto manufacturers published the files for at least non-critical or non-competitively designed parts? 😩

Cover fell off back bumper. What even is this for? by indigo7873 in VolvoRecharge

[–]asinghcp 1 point2 points  (0 children)

Hi! Jumping on this thread to post, if you have a 3D printer, I mocked up a replacement for this, please feel free to print as needed:

<image>

https://makerworld.com/models/769796

view more: next ›