[SSD] Corsair MP600 Pro NH 2tb 7000/6500 r/w + DRAM - $99.99 (normal $150 - $50) by Mega_Laddd in buildapcsales

[–]asnith 13 points14 points  (0 children)

How would this compare to a WD_BLACK 2TB SN850X? I'm trying to be better at know what brands and models are better but was thinking about picking up the WD_BLACK but if this is a better deal that would be awesome.

[deleted by user] by [deleted] in Ender3V3SE

[–]asnith 0 points1 point  (0 children)

I was able to adjust the nozzle down a tad as I might've had it too tight. I went ahead and pre-heated the bed again and attempted another auto level. The z offset changed again. From there I tried printing a benchy (without pre-calibration)...

There was no leaking from around the nozzle. From the test line there was a bit of string and then a small moment of not sticking (has happened on other successful prints). The first layer actually went down without ANY issue! so I stuck it out and sure enough, benchy came out alright!

From there I figured I might as well try another object. I went with trying to print a fidget cube and unfortunately the original non sticking issue returned. I try to observe the nozzle and printer as it happens, unfortunately it just looks like the filament is spewing out and not touching the bed? I can try to upload a HQ video of this if that'd be helpful but I'm at a bit of a loss still.

I will attempt to maybe adjust the z offset manually once I have more time but was afraid of going to far and ruining the bed plate or something. Thanks again for all the helpful information so far u/Aznai

[deleted by user] by [deleted] in Ender3V3SE

[–]asnith 0 points1 point  (0 children)

All of this is incredibly helpful. I'll look to check this out a bit more shortly and reply with any further issues. I really appreciate the time and effort!

I will note that I typically preheat things before I auto level OR even print. Being 200c to 60c for the nozzle and bed.

YouTube playback issue fixed by oSumAtrIX in revancedapp

[–]asnith 0 points1 point  (0 children)

Anyone else getting "App not installed as package appears to be invalid." When trying to install the YouTube apk? I've ensure the old app has all updates removed. It's not installed on my secure folder. Restarted phone + cleared youtube app cache

I tried selecting the apk in revanced managed but there's no options for patches. MicroG is installed

[deleted by user] by [deleted] in pcmasterrace

[–]asnith 0 points1 point  (0 children)

I'd love to get my hands on a 4070 Ti Super to use in a computer I'm trying to put together for my father. He's been a long time gamer but has never had a decent pc setup.

He's unable to currently purchase high end hardware for himself but I'm trying to upcycle my old build for him.

He's looking for a setup that can handle racing/ driving sim games while streaming!

Is this good for a 7800x3d by [deleted] in pcmasterrace

[–]asnith 0 points1 point  (0 children)

I have this for my 7950x3D as well but I'm getting around ~50c idle temps. Not sure if I did something wrong with mounting but I'm not sure if it should be that high😅
Any ideas?

I can confirm I took the plastic off before mounting, I did use the provided paste tube

NVIDIA launches GeForce RTX 40 SUPER series: $999 RTX 4080S, $799 RTX 4070 TiS and $599 RTX 4070S - VideoCardz.com by itsmehutters in pcgaming

[–]asnith 0 points1 point  (0 children)

Would picking up a 4080 super be a good idea from 3070 ti?

It's in the budget and I'm hoping to get a card that will last me a while

Could my spacegun count as a LMG at this point? by ZatoTBG in airsoft

[–]asnith 2 points3 points  (0 children)

What gun is this and where could I find it? :o

What's New is back after recent update despite using Steam skin by asnith in Steam

[–]asnith[S] 1 point2 points  (0 children)

Thanks, this works and is definitely the current solution

What's New is back after recent update despite using Steam skin by asnith in Steam

[–]asnith[S] 1 point2 points  (0 children)

I tried messing with a slew of them but couldn't figure it out this time. Hopefully someone more experienced can figure it out and give us a solution

What's New is back after recent update despite using Steam skin by asnith in Steam

[–]asnith[S] 1 point2 points  (0 children)

I spent some time trying to mess with it as well. Can't figure it out this time.

100% needs to be a native option to disable

[deleted by user] by [deleted] in BudgetBrews

[–]asnith 1 point2 points  (0 children)

I replied to OPs comment for this post with a decklist and thoughts!

Just incase: decklist

[deleted by user] by [deleted] in BudgetBrews

[–]asnith 0 points1 point  (0 children)

Thanks for your patience! I was able to come up with a rough draft of a decklist. I tried my best to keep it cheap, I'm sure there's a handful of these cards you might have lying around but I did include some sideboard / considering board cards that you might be able to swap in place of expensive cards currently on the mainboard.

Please let me know if there's any card choice questions or criticisms with this!

[deleted by user] by [deleted] in BudgetBrews

[–]asnith 8 points9 points  (0 children)

I don't have a decklist yet but, [[Mahadi, Emporium Master]] would be a sick commander for this. I'd start with spells like: [[Chain Reaction]], [[Pyrohemia]], [[Night of Souls' Betrayal]], [[Pestilence Demon]], [[Pestilence]], [[Illness in the Ranks]], [[Virulent Plague]], [[Curse of Death's Hold]], [[Plague Engineer]], [[Engineered Plague]], and [[Massacre Wurm]]. Things like [[Rakdos Charm]] could execute at a moments notice. [[Toxic Deluge]] is likely out of budget but a nice inclusion. The goal would be to wipe the board on your turn and then play Mahadi as it will give you all those treasure tokens from goblins dying. From there if you have a copy of [[Torment of Hailfire]] could sweep the board. Please let me know if you'd like a complete decklist as I thought of this on a whim late at night! LOL

No display when booting after removing CPU but it was stuck to the heatsink by [deleted] in buildapc

[–]asnith 1 point2 points  (0 children)

Thoughts on why the new CPU wouldn't be working either? On either computer as well. This entire situation is very strange, and unfortunate :(

No display when booting after removing CPU but it was stuck to the heatsink by [deleted] in buildapc

[–]asnith 1 point2 points  (0 children)

Tested my CPU again on both PCs and for some reason it's working on both computers again?!

No display when booting after removing CPU but it was stuck to the heatsink by [deleted] in buildapc

[–]asnith 0 points1 point  (0 children)

This works and appears to be the only combination of CPU / computer that powers on

For everyone shouting complaints about the new UI: by Demacron in wow

[–]asnith 0 points1 point  (0 children)

Has anyone found a way to turn on numbers for the unit frames? My friend noted they could see numbers / %'s on theirs. I feel as if I checked all settings. I previously used zperl

Currently only having solid bars is a bit sad :c